User Guide
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-8 Chapter 3: OSD (On-Screen Display) menu
6. Signal
In this function, you can select your desired input source.
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
Auto Detection
Signal
Settings
Shortcut
HDMI 1
HDMI 2
DisplayPort
USB Type-C
PA279CRV
3840 x 2160_60Hz
• Auto Detection: automatically detects other active signals when
current input signal is inactive.
To activate this function, you need to do the following: remove the connection
of Daisy-Chain DisplayPort output (to disable MST output).