User Guide
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-9ASUS PA279CRV Series LCD Monitor
7. Settings
Allows you to adjust the system.
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
Sound
Signal
Shortcut
Media sync
Dynamic Dimming
Power Saving
OSD Setup
Settings
DisplayPort Stream
Key Lock
Power Indicator
PA279CRV
3840 x 2160_60Hz
• MediaSync: Turn on VESA MediaSync support.
* MediaSync can only be activated within 48Hz ~ 60Hz.
* For supported GPUs, minimum PC system and driver
requirements, please contact the GPU manufactures.
To activate this function, you need to do the following: turn off PIP/PBP.
• Dynamic Dimming: Synchronizes with contents while contrast
changing to execute backlight dynamic dimming. You can adjust the
synchronization speed as “Fast”, “Medium”, “Gradual” or “O”.
To activate this function, you need to do the following: turn off
PIP/PBP
.
• Power Saving: Select Normal Level for power on hub during power
saving. Select Deep Level for power off hub during power saving.
To activate daisy chaining, you need to do the following: set Power Saving to
Normal Level. Note: Input port will be xed (no auto detection) when DP out
cable is plugged.