PA279CV seeria LCD monitor Kasutusjuhend
Sisukord Teatised........................................................................................................ iv Ohutusteave.................................................................................................. v Hooldus ja puhastamine............................................................................ vii 1.1 Tere tulemast!................................................................................ 1-1 1.2 Pakendi sisu..................................................
A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded. This product is a better choice.
Teatised Föderaalse Sidekomisjoni (FCC) avaldus See seade vastab FCC eeskirjade 15. jaotise nõuetele. Seade peab vastama kahele tingimusele: • Käesolev seade ei tohi põhjustada ohtlikke häireid ning • Käesolev seade peab vastu võtma kõiki signaale, kaasa arvatud signaale, mis võivad põhjustada soovimatuid häireid seadme töös. Käesolev seade on läbinud katsetused ning tunnistatud vastavaks klassi B digitaalseadmetele esitatavatele piirangutele, vastavalt FCC reeglite 15. jaotisele.
Ohutusteave • Enne monitori paigaldamist lugege hoolikalt kõiki seadmega kaasnenud dokumente. • Tuleohu või elektrilöögi vältimiseks ärge jätke monitori kunagi vihma kätte ega niiskesse keskkonda. • Ärge püüdke kunagi avada monitori korpust. Monitoris kasutatav kõrgepinge võib põhjustada tõsiseid kehalisi vigastusi. • Kui toitepinge puudub, siis ärge püüdke probleemi ise lahendada. Võtke ühendust kvalifitseeritud hooldustehnikuga või jaemüüjaga.
HOIATUS Muude, kui ette nähtud peakomplektide või kõrvakuularite kasutamine võib põhjustada kuulmiskadu, mis on tingitud liiga suurest helirõhust.
Hooldus ja puhastamine • Enne monitori tõstmist või ümberpaigutamist tuleks kaablid ja toitejuhe seadme küljest lahti ühendada. Monitori teisaldamisel kasutage õiget tõstmistehnikat. Monitori tõstmisel või kandmisel haarake kinni selle servadest. Ärge haarake tõstmisel statiivist ega juhtmetest. • Puhastamine. Lülitage monitor välja ja ühendage toitejuhe lahti. Puhastage monitori pinda mitte-abrasiivse ebemevaba lapiga. Rasked plekid saab eemaldada lahjas pesuvahendis niisutatud lapiga.
Kust leida täiendavat teavet Täiendavat teavet ning toote- ja tarkvaravärskendusi leiate järgmistest allikatest. 1. ASUSe veebisaidid ASUSe ülemaailmsed veebisaidid pakuvad uuendatud teavet ASUSe riistvara ja tarkvaratoodete kohta. Vaadake saiti http://www.asus.com 2. Valikuline dokumentatsioon Võimalik, et teie tootepakend sisaldab valikulist dokumentatsiooni, mis on lisatud edasimüüja poolt. Need dokumendid ei ole standardpakendi osaks.
1.1 Tere tulemast! Täname, et ostsite ASUS® LED monitori! Uusim laiekraan LCD monitor ASUSelt pakub karget, laiemat ja eredamat kuva, millele lisandub palju muid omadusi, mis teevad ekraani jälgimise senisest meeldivamaks. Nende funktsioonidega monitor rikastab teie visuaalset kogemust ja muudab arvutikasutamise mugavamaks! 1.2 Pakendi sisu Veenduge, et pakend sisaldab järgmisi artikleid.
1.3 Monitori kokkupanek Monitori koostamiseks: 1. Joondage hooval olev kruviauk kruviga, mis on alusel. Seejärel pange alus hoova külge. 2. Ühendage alus hoova külge alusel oleva kruvi abil. 2 1 * Aluse kruvi suurus: M6 × 17 mm 1-2 Jaotis 1.
1.4 Kaablite ühendamine 1.4.1 LCD monitori tagakülg 11 10 1 2 3 1. AC-IN port 2. Toitelüliti 3. HDMI1 pesa 4. HDMI2 pesa 5. DP-in pesa 6. USB 3.2 Gen 1 tüüp C 7. Kõrvaklapidde väljundpesa 8. USB 3.2 Gen 1 tüüp A 9. USB 3.2 Gen 1 tüüp A 4 5 6 7 8 9 10. USB 3.2 Gen 1 tüüp A 11. USB 3.2 Gen 1 tüüp A Monitor ühildub ülikiire ühendusega USB 3.2 Gen 1 (5 Gb/s). Port võimaldab võimsuse ülekannet max 65 W väljundvooluga 5 V / 3 A, 9 V / 3 A, 12 V / 3 A, 15 V / 3 A ja 20 V / 3,25 A.
1.5 Monitori tutvustus 1.5.1 Juhtnuppude kasutamine Kasutage monitori tagaküljel asuvaid juhtnuppe, et määrata pildi sätted. 6 1. 4 3 2 1 Toitenupp / toite indikaator. • Lülitab monitori sisse/välja • Toiteindikaatori värvide tähendused on näidatud järgmises tabelis. 2. • • • 3. Olek Kirjeldus Valge SEES Merevaigukollane Ooterežiim VÄLJAS VÄLJAS Menüünupp: Vajutage seda nuppu selleks, et kuvada ekraanimenüü (OSD), kui OSD on välja lülitatud. OSD menüüsse sisenemine.
5. Shortcut 1 (Otsetee 1): • Vajutage seda nuppu selleks, et kuvada ekraanimenüü (OSD), kui OSD on välja lülitatud. • Vaikimisi: Brightness (Heleduse) reguleerimise kiirklahv • Funktsiooninupu otstarbe muutmiseks avage menüü Shortcut (Otseteed) > Shortcut 1 (Otseteed 1). 6. Shortcut 2 (Otsetee 2): • Vajutage seda nuppu selleks, et kuvada ekraanimenüü (OSD), kui OSD on välja lülitatud.
2.1 Monitori reguleerimine • Optimaalseks vaatamiseks paigutage monitor otse vaatevälja, seejärel seadke monitor enda jaoks kõige sobivama nurga alla. • Monitori kaldenurga valimisel hoidke statiivi kinni, et vältida selle mahakukkumist. • Monitori kaldenurka saab reguleerida vahemikus +35˚ kuni –5˚ ja monitori saab pööratavasakule või paremale 45˚.
2.2 Toendi/statiivi eemaldamine (VESA seinapaigalduseks) Selle monitori eemaldatav statiiv on spetsiaalselt loodud VESA nõuetele vastava seinapaigalduse jaoks. Toendi/statiivi eemaldamiseks 2-2 1. Ühendagi lahti toite- ja signaalikaablid. Pange monitor kummuli ESPpakendile. 2. Vajutage tagakaanel olevat kiirvabastusnuppu. 3. Eemaldage jaland (hoob ja alus) monitori küljest. • VESA seinapaigalduskomplekt (100 mm x 100 mm) ei kaasne seadmega.
2.
3.1 Ekraanimenüü OSD (On-Screen Display) 3.1.1 Ümberseadistamine ProArt Preset ProArtPreset ASUS PA279CV Standard Mode DisplayPort 3840x2160@60Hz Standard Mode sRGB Mode Rec. 709 Mode DCI-P3 Mode HDR DICOM Mode Scenery Mode ProArt Preset ProArtPreset ASUS PA279CV Standard Mode DisplayPort 3840x2160@60Hz Reading Mode Darkroom Mode Rapid Rendering Mode User Mode 1 User Mode 2 1. OSD menüü kuvamiseks vajutage mõnda nuppu (välja arvatud toite nupp). 2. Vajutage 3.
3.1.2 1. OSD funktsioonide tutvustus ProArtPreset See funktsioon sisaldab kahteteist alamfunktsiooni, mida saate oma eelistustest lähtuvalt valida. ProArt Preset ProArtPreset ASUS PA279CV Standard Mode DisplayPort 3840x2160@60Hz Standard Mode sRGB Mode Rec.
• Darkroom Mode (Pimekambri režiim): see on parim valik vähese valgusega keskkonnas. • Rapid Rendering Mode (Kiirviimistluse režiim): Matkib kuvamist, mis on nagu kõrgel värskendussagedusel, et tekitada erinevaid tagavalguse sagedusi. Rapid Rendering Mode (Kiirviimistluse režiimi) saab aktiveerida vaid sagedusel 60 Hz. Selle funktsiooni aktiveerimiseks peate välja lülitama funktsiooni Adaptive-Sync. Selle funktsiooni kasutamise ajal ei saa heledust ja ASCR-i (kontrastsuse suhet) muuta.
2. Blue Light Filter (Sinise valguse filter) Võimaldab reguleerida taustavalguse LED-ide sinise valguse intensiivsust. ProArt Preset Blue Light Filter ASUS PA279CV Standard Mode DisplayPort 3840x2160@60Hz Level 0 Level 1 Level 2 Level 3 Level 4 • Level 0 (Tase 0): Ei muuda • Kui Blue Light Filter (Sinise valguse filter) on aktiveeritud, imporditakse automaatselt Standard Mode (Režiim Standardne) vaikesätted. • Level 1 (Tase 1) kuni Level 3 (Tase 3) korral saab kasutaja muuta Brightness (Heledus).
3. ProArtPalette (ProArt palett) ProArt Preset ProArtPalette ASUS PA279CV Standard Mode DisplayPort 3840x2160@60Hz Brightness Contrast Saturation Hue Color Temp. Gamma Black Level ProArt Preset ProArtPalette ASUS PA279CV Standard Mode DisplayPort 3840x2160@60Hz Color Color Reset • Brightness (Heledus): Reguleerimisvahemik on 0 – 100. • Contrast (kontrastsus): Reguleerimisvahemik on 0 – 100. • Saturation (Küllastus): Reguleerimisvahemik on 0 – 100.
P3-Theater on ainult siis saadaval, kui on valitud DCI-P3 Mode (režiim DCI-P3). • Color Reset (Värvi lähtestamine): * Current mode color reset (Praeguse värvirežiimi lähtestamine): lähtestab praeguse värvirežiimi värvisätted tehase vaikeväärtustele. * All modes color reset (Värvi lähtestamine kõigis režiimides): lähtestab kõigi värvirežiimide värvisätted tehase vaikeväärtustele. 4.
5. Sound (Heli) Võimaldab valida: Volume (Heli valjus), Mute (Vaigistamine) ja Source (Allikas) ProArt Preset Sound ASUS PA279CV Standard Mode DisplayPort 3840x2160@60Hz Volume Mute Source 6. • Volume (Helitugevus): reguleerib väljundheli taset. • Mute (Vaigista): võimaldab lülitada heli ON (SISSE) ja Off (VÄLJA). • Source (Allikas): määrab, et heli sisend on allikalt. PIP/PBP Setting (PIP/PBP säte) Säte PIP/PBP võimaldab avada alamakna(d), mis on ühendatud ükskõik millisest videoallikast.
• Peaallikas ja alamallikas on nähtavad järgnevas tabelis. Alamallikas HDMI-1 HDMI-2 DisplayPort USB Type-C Peaallikas 7. HDMI-1 HDMI-2 DisplayPort USB Type-C NA NA OK OK NA NA OK OK OK OK NA NA OK OK NA NA Input Select (sisendi valik) Saab valida sisendi: HDMI-1, HDMI-2, DisplayPort, USB Type-C, Auto Source Detection (Allika automaatvalimise) aktiveerimine/ inaktiveerimine.
8.
* USB 3.2 Gen 1: USB 3.2 Gen 1 C-tüübi port on võimeline oma andmesidekiiruse tõttu väljastama ainult resolutsiooni 4K2K 30 Hz. * USB 2.0: USB 2.0 C-tüübi port on võimeline oma andmesidekiiruse tõttu väljastama resolutsiooni 4K2K 60 Hz. 3-10 • Andmesidekiirus jääb USB 3.2 Gen 1 tasemele, kui kasutatakse USB C-tüüpi A-tüübi kaablile. • USB Setup-i säte ei mõjuta resolutsiooni, kui allikas on ühendatud porti DisplayPort või HDMI.
* Ruler: See muster kujutab endast füüsilist mõõduskaalat, mis asub ülaosas ja vasakul. Võite hoida tagastusnuppu all kolm sekundit, et lülitada ümber meetermõõdustikust briti ühikutele. 5 10 15 20 25 30 5 10 15 * Alignment: aitavad disaineritel ja kasutajatel korraldada lehekülje sisu ja paigutust ning tagada lehekülje väljanägemise ja mulje järjepidevus. Alignment Grid * A4: võimaldab kasutajatel oma dokumente ekraanil tegelikus suuruses vaadata.
9. Shortcut (Kiirklahv) Selle suvandi valimine võimaldab määrata kaks kiirklahvi. Kasutaja saab valida funktsiooniklahvi määranguks: Blue Light Filter (Sinise valguse filter), Brightness (Heledus), Contrast (Kontrastsus), PIP/ PBP Setting (PIP/PBP säte), Color Temp. (Värvustemperatuur), Volume (Heli valjus), sRGB Mode (sRGB-režiim), Rec. 709 Mode (Režiim soovitatav 709), DICOM Mode (DICOM-režiim), User Mode 1 (Kasutajarežiim 1), User Mode 2 (Kasutajarežiim 2).
3.
3.3 Rikkeotsing (FAQ) Probleem 3-14 Võimalik lahendus Toite LED-märgutuli ei sütti • Vajutage nuppu kontrollimaks, kas monitor on režiimis ON (SEES). • Veenduge, et toitekaabel on monitoriga ja pistikupesaga korralikult ühendatud. • Kontrollige toiteindikaatori funktsiooni OSD peamenüüs. Valige nupp “ON” (Sees) toite LED indikaatori sisselülitamiseks. Toite LED indikaator helendab merevaigukollaselt ja ekraanil pole kujutist • Kontrollige, kas monitor ja arvuti on režiimis ON (SEES).
3.