PA279CV-sarja Nestekidenäyttö Käyttöopas
Sisällysluettelo Tiedoksiantoja.............................................................................................. iv Turvallisuustiedot......................................................................................... v Huolto ja puhdistus.................................................................................... vii 1.1 Tervetuloa!..................................................................................... 1-1 1.2 Pakkauksen sisältö...................................
A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded. This product is a better choice.
Tiedoksiantoja FCC-lausunto Tämä laite on FCC sääntöjen kohdan 15 mukainen. Käyttö täyttää seuraavat kaksi ehtoa: • Tämä laite ei saa aiheuttaa haitallista häiriötä, ja • Tämän laitteen tulee hyväksyä kaikki vastaanotettu häiriö, mukaan lukien häiriö, joka voi aiheuttaa ei-toivottuja toimintoja. Tämä laite on testattu ja sen on havaittu toimivan digitaalilaitteiden luokan B rajoissa, jotka on määritelty FCC:n sääntöjen kohdassa 15.
Turvallisuustiedot • Lue huolellisesti kaikki toimitukseen kuuluvat asiakirjat ennen näytön asettamista. • Estääksesi tulipalon tai sähköiskun vaaran älä koskaan altista näyttöä sateelle tai kosteudelle. • Älä koskaan yritä avata näytön koteloa. Näytön sisällä oleva vaarallisen korkea jännite voi johtaa vakavaan fyysiseen vammaan. • Jos virtalähde on rikkoutunut, älä yritä korjata sitä itse. Ota yhteys pätevään huoltoteknikkoon tai jälleenmyyjään.
VAROITUS Muiden kuin määritettyjen kuulokkeiden tai korvanappien käyttö voi johtaa kuulon menetykseen liiallisten äänenpaineiden vuoksi.
Huolto ja puhdistus • Ennen kuin nostat tai sijoitat näytön uuteen paikkaan, on parempi irrottaa kaapelit ja virtajohto. Sijoita näyttö uuteen paikkaan oikealla nostotekniikalla. Kun nostat tai kannat näyttöä, pidä kiinni näytön reunoista. Älä nosta näyttöä telineestä tai virtajohdosta. • Puhdistus. Sammuta näyttö ja irrota virtajohto. Puhdista näytön pinta nukkaamattomalla, hankaamattomalla liinalla. Piintyneet tahrat voi poistaa miedolla puhdistusaineliuoksella kostutetulla liinalla.
Lisätietojen saaminen Katso seuraavista lähteistä lisätietoja sekä tuote- ja ohjepäivityksiä. 1. ASUS-verkkosivustot ASUS-yrityksen maailmanlaajuiset verkkosivustot tarjoavat päivitettyjä tietoja ASUS-laitteisto ja -ohjelmistotuotteista. Katso http://www.asus.com 2. Valinnaiset asiakirjat Tuotteen pakkaus saattaa sisältää jälleenmyyjän lisäämiä valinnaisia asiakirjoja. Nämä asiakirjat eivät sisälly vakiopakkaukseen.
1.1 Tervetuloa! Kiitos, kun ostit ASUS®-nestekidenäytön! Uusin ASUS-laajakuvanestekidenäyttö tarjoaa terävämmän, leveämmän ja kirkkaamman näytön sekä joukon ominaisuuksia, jotka parantavat katselukokemustasi. Näiden ominaisuuksien ansiosta pystyt nauttimaan näytön tarjoamasta käyttömukavuudesta ja ihastuttavasta visuaalisesta kokemuksesta. 1.
1.3 Monitorin kokoaminen Monitorin kokoaminen 1. Kohdista varren ruuvinreikä toimitukseen kuuluvan alustan ruuvin kanssa. Liitä sitten alusta varteen. 2. Kiinnitä alusta varteen kiristämällä toimitukseen kuuluva ruuvi.
1.4 Kaapelien liittäminen 1.4.1 Nestekidenäyttö takaa 11 10 1 2 1. Vaihtovirtapistorasia 2. Virtakytkin 3. HDMI1-portti 4. HDMI2-portti 5. DP - in -portti 6. USB 3.2 Gen 1 Type-C 7. Kuulokelähtöportti 8. USB 3.2 Gen 1 Type-A 9. USB 3.2 Gen 1 Type-A 3 4 5 6 7 8 9 10. USB 3.2 Gen 1 Type-A 11. USB 3.2 Gen 1 Type-A Tämä näyttö on Super-Speed USB 3.2 Gen 1 -yhteensopiva (5 Gbps).
1.5 Näytön johdanto 1.5.1 Ohjauspainikkeen käyttö Käytä näytön pohjassa olevaa ohjauspainiketta kuva-asetusten säätämiseen. 6 1. 4 3 2 1 Virtapainike/virran merkkivalo: • Kytkee näytön päälle/pois. • Virran merkkivalon värien selitykset näkyvät seuraavassa taulukossa. 2. • • • 3. Tila Kuvaus Valkoinen Päällä Keltainen Valmiustila Pois päältä Pois päältä Valikkopainike: Paina tätä painiketta näyttääksesi OSD-valikon, kun OSD on kytketty pois päältä. Avaa OSD-valikon.
5. Shortcut 1 (Pikavalinta 1): • Paina tätä painiketta näyttääksesi OSD-valikon, kun OSD on kytketty pois päältä. • Oletus: Brightness (Kirkkaus)-pikanäppäin • Vaihtaaksesi pikanäppäintoiminnon, siirry kohtaan Shortcut (Pikavalinta) > Shortcut 1 (Pikavalinta1) -valikko. 6. Shortcut 2 (Pikavalinta 1): • Paina tätä painiketta näyttääksesi OSD-valikon, kun OSD on kytketty pois päältä.
2.1 Näytön säätäminen • Suosittelemme optimaalisen katselukulman säätämistä varten, että katsot ensin pystysuorassa olevaa näyttöä ja säädät sen sitten itsellesi parhaiten sopivaan kulmaan. • Pidä kiinni jalustasta estääksesi näyttöä kaatumasta katselukulmaa vaihtaessasi. • Voit säätää näytön katselukulmaa +35˚ – -5˚ ja se sallii 45˚ kääntösäädön joko vasemmalle tai oikealle.
2.2 Varren/jalustan irrottaminen (VESAseinäkiinnitys) Tämän näytön irrotettava jalusta on suunniteltu erityisesti VESAseinäkiinnitystä varten. Varren/jalustan irrottaminen 2-2 1. Irrota virta- ja signaalikaapelit. Aseta näyttö varovasti alassuin sen EPS-pakkauksen päälle. 2. Paina takakannen pikavapautuspainiketta. 3. Irrota jalusta (varsi ja alusta) näytöstä. • VESA-seinäkiinnityssarja (100 x 100 mm) on hankittava erikseen.
2.
3.1 Kuvaruutu (OSD) -valikko 3.1.1 Uudelleenmääritys ProArt Preset ProArtPreset ASUS PA279CV Standard Mode DisplayPort 3840x2160@60Hz Standard Mode sRGB Mode Rec. 709 Mode DCI-P3 Mode HDR DICOM Mode Scenery Mode ProArt Preset ProArtPreset ASUS PA279CV Standard Mode DisplayPort 3840x2160@60Hz Reading Mode Darkroom Mode Rapid Rendering Mode User Mode 1 User Mode 2 1. Tuo OSD-valikko näkyviin painamalla mitä tahansa painiketta (paitsi Virtapainiketta) 2. Paina 3.
3.1.2 1. Kuvaruutuvalikon johdanto ProArtPreset Tämä toiminto sisältää kaksitoista alitoimintoa, joista voit valita tarpeesi mukaan. ProArt Preset ProArtPreset ASUS PA279CV Standard Mode DisplayPort 3840x2160@60Hz Standard Mode sRGB Mode Rec.
• Rapid Rendering Mode (Nopea esitystila): Simuloi korkean virkistystaajuuden suorituskyvyn näyttöä erilaisten taustavalotaajuuksien tuottamiseksi. Rapid Rendering Mode (Nopean esitystilan) voi aktivoida vain 60 Hz:llä. Aktivoidaksesi tämän toiminnon, on tehtävä seuraava: kytke Adaptive-Sync pois päältä. Kirkkaus- ja ASCR-toimintoja ei voi säätää tätä toimintoa käytettäessä. • User Mode 1 (Käyttäjätila 1): Mahdollistaa värisäätöjen tekemisen Lisäasetukset-kohdassa.
2. Blue Light Filter (Sinisen valon suodatin) Säätää LED-taustavalon säteilemän sinisen valon energiatasoa. ProArt Preset Blue Light Filter ASUS PA279CV Standard Mode DisplayPort 3840x2160@60Hz Level 0 Level 1 Level 2 Level 3 Level 4 • Level 0 (Taso 0): Ei muutosta • Kun Blue Light Filter (sinisen valon suodatin) on aktivoitu, Standard Mode (Vakiotila) oletusasetukset tuodaan automaattisesti. • Level 1–3 (Taso 1–3) välillä Brightness (Kirkkaus)-toiminto on käyttäjän määritettävissä.
3. ProArtPalette ProArt Preset ProArtPalette ASUS PA279CV Standard Mode DisplayPort 3840x2160@60Hz Brightness Contrast Saturation Hue Color Temp. Gamma Black Level ProArt Preset ProArtPalette ASUS PA279CV Standard Mode DisplayPort 3840x2160@60Hz Color Color Reset • Brightness (Kirkkaus): Säätöalue on 0-100. • Contrast (Kontrasti): Säätöalue on 0-100. • Saturation (Värikylläisyys): Säätöalue on 0-100. • Hue (Sävy): Vaihda kuvan väriä vihreän ja purppuran välillä • Color Temp.
P3-Theater on käytettävissä vain, kun DCI-P3 Mode (DCI-P3-tila) on valittu. • Color Reset (Värien nollaus): * Current mode color reset (Nykyisen tilan värien nollaus): Nollaa nykyisen väritilan väriasetukset tehtaan oletusarvoihin. * All modes color reset (Kaikkien tilojen värien nollaus): Nollaa kaikkien väritilojen väriasetukset tehtaan oletusarvoihin. 4.
5. Sound (Ääni) Voit säätää Volume (äänenvoimakkuutta), Mute (mykistystä) ja Source (lähdettä) tästä päätoiminnosta. ProArt Preset Sound ASUS PA279CV Standard Mode DisplayPort 3840x2160@60Hz Volume Mute Source 6. • Volume (Äänenvoimakkuus): Säätää lähtevän äänenvoimakkuuden tason. • Mute (Mykistys): Valitse äänen mykistys ON (PÄÄLLE) tai OFF (POIS). • Source (Lähde): valitsee mistä lähteestä näytön ääni tulee.
• Päälähde ja alalähde ovat käytettävissä seuraavan taulukon mukaisesti. Alalähde HDMI-1 HDMI-2 DisplayPort USB Type-C Päälähde 7. HDMI-1 HDMI-2 DisplayPort USB Type-C NA NA OK OK NA NA OK OK OK OK NA NA OK OK NA NA Input Select (Tulon valinta) Valitse tulolähde vaihtoehdoista HDMI-1, HDMI-2, DisplayPort, USB Type-C. Ota käyttöön / pois käytöstä Auto Source Detection (Tulosignaalilähteen automaattinen) tunnistus.
8.
* USB 3.2 Gen 1: Tiedonsiirtonopeus 3.2 Gen 1 :n teknisten tietojen mukaan USB Type C -portissa voi tuottaa enintään 4K2K 30 Hz:n maksimiresoluution. * USB 2.0: Tiedonsiirtonopeus 2.0:n teknisten tietojen mukaan USB Type C -portissa voi tuottaa enintään 4K2K 60 Hz:n maksimiresoluution. 3-10 • Tiedonsiirtonopeus pysyy USB 3.2 Gen 1:ssä käytettäessä USB Type C - A -kaapelia. • USB-asetuksen asettaminen ei vaikuta resoluutioon, jos lähde on liitetty DisplayPort- tai HDMI-porttiin.
* Ruler: Tämä kuvio esittää fyysisen viivoittimen ylhäällä ja vasemmalla puolella. Voit painaa Palaa-painiketta yli 3 sekuntia vaihtaaksesi mittayksikön metrisen ja englantilaisen välillä. 5 10 15 20 25 30 5 10 15 * Alignment: Ruudukkokuvio helpottaa suunnittelijoiden ja käyttäjien sisällön organisointia ja sivun asettelua yhdenmukaisen näkymän ja tunnun saavuttamista. Alignment Grid * A4: Antaa käyttäjien tarkastella asiakirjoja näytöllä reaalikokoisina.
• 9. All Reset (Nollaa kaikki): Valitse "Yes" (Kyllä) palauttaaksesi kaikki asetukset tehtaan oletustilaan. Shortcut (Pikavalinta) Tämän valinnan valitseminen antaa asettaa kaksi pikavalintanäppäintä. Käyttäjä voi valita vaihtoehdoista Blue Light Filter (Sinisen valon suodatin), Brightness (Kirkkaus), Contrast (Kontrasti), PIP/PBP Setting (PIP/PBP-asetus), Color Temp. (Värilämp.), Volume (Äänenvoimakkuus), sRGB Mode (sRGB-tila), Rec. 709 Mode (Rec.
3.2 Tekniset tiedot Malli Paneelin koko Maksimiresoluutio Kirkkaus (Tyyp.) Sisäinen kontrastisuhde (Tyyp.) Katsomiskulma (CR=10) Näyttövärit Värikylläisyys Vasteaika Satelliittikaiutin PA279CV Leveys 27" (68,47cm) 3840x2160@60Hz 350 cd/m2 1000:1 178° (V) /178° (H) 1,07 B 100 % sRGB 5 ms (harmaasta harmaaseen) 2W x 2 stereo Kuulokelähtö Kyllä Ääni HDMI:stä Kyllä HDMI-tulo Kyllä DisplayPort-tulo USB-portti Virta päällä -virrankulutus (maks.
3.3 Vianmääritys (Usein kysytyt kysymykset) Ongelma 3-14 Mahdollinen ratkaisu Virran merkkivalo ei pala • Paina -painiketta tarkistaaksesi onko näyttä PÄÄLLÄ -tilassa. • Tarkista onko virtajohto liitetty oikein näyttöön ja pistorasiaan. • Tarkista Virran merkkivalo -toiminto pää-OSDvalikossa. Valitse "PÄÄLLE" kytkeäksesi virran LED-merkkivalon päälle. Virran merkkivalo palaa keltaisena eikä näytössä näy kuvaa • Tarkista ovatko näyttö ja tietokone PÄÄLLÄ -tilassa.
3.