Serie PA279CV Monitor LCD Guía del usuario
Tabla de contenido Avisos........................................................................................................... iv Información de seguridad............................................................................ v Limpieza y mantenimiento......................................................................... vii 1.1 ¡Bienvenido!.................................................................................. 1-1 1.2 Contenido del paquete........................................
A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded. This product is a better choice.
Avisos Declaración de la Comisión Federal de Comunicaciones (FCC, Federal Communications Commission) Este dispositivo cumple la Parte 15 de las Reglas de la FCC. Su funcionamiento está sujeto a dos condiciones: • • Este dispositivo no puede causar interferencias perjudiciales, y Este dispositivo debe aceptar cualquier interferencia recibida, incluida la interferencia que pueda causar un funcionamiento no deseado.
Información de seguridad • Antes de instalar el monitor, lea atentamente toda la documentación incluida en el paquete. • Para evitar incendios o descargas eléctricas, no exponga el monitor a la lluvia ni a la humedad. • No abra la carcasa del monitor. En el interior del mismo hay componentes con voltaje alto y peligroso que puede provocar graves daños personales. • Si la fuente de alimentación se avería, no intente arreglarla usted mismo.
ADVERTENCIA El uso de otros auriculares o audífonos que no sean los especificados puede producir pérdida de audición debido a las presiones de sonido excesivas.
Limpieza y mantenimiento • Antes de levantar o reparar el monitor, debe desconectar los cables y el cable de alimentación. Siga las técnicas correctas para levantar el monitor cuando lo coloque. Cuando levante o transporte el monitor, agárrelo por los bordes. No levante la pantalla por la base ni el cable de alimentación. • Limpieza. Apague el monitor y desenchufe el cable de alimentación. Limpie la superficie del monitor con un paño sin pelusas y no abrasivo.
Dónde encontrar más información Consulte las siguientes fuentes para obtener información adicional y las actualizaciones del software. 1. Sitios Web de ASUS Los sitios Web de ASUS en todo el mundo proporcionan información actualizada del hardware y los productos de software de ASUS. Consulte el sitio Web http://www.asus.com 2. Documentación opcional El paquete del producto puede incluir documentación opcional que puede haber agregado su distribuidor. Estos documentos no forman parte del paquete estándar.
1.1 ¡Bienvenido! ¡Gracias por adquirir el monitor LCD de ASUS®! Los monitores LCD panorámicos más modernos de ASUS proporcionan una visualización más nítida, clara y brillante, además de una gran cantidad de funciones que mejoran la experiencia de visualización. ¡Con estas funciones, disfrutará de la comodidad y la experiencia visual agradable que proporciona el monitor! 1.
1.3 Ensamblar el monitor Para ensamblar el monitor: 1. Alinee el orificio del tornillo del brazo con el tornillo integrado en la base. A continuación, inserte la base en el brazo. 2. Fije la base al brazo apretando el tornillo incluido.
1.4 Conectar los cables 1.4.1 Parte posterior del monitor LCD 11 10 1 2 3 4 1. Puerto ENTRADA DE CA 2. Interruptor de alimentación 3. Puerto HDMI1 4. Puerto HDMI2 5. Puerto de entrada DP 6. USB 3.2 Gen 1 Type-C 7. Puerto de salida de auriculares 8. USB 3.2 Gen 1 Type-A 9. USB 3.2 Gen 1 Type-A 5 6 7 8 9 10. USB 3.2 Gen 1 Type-A 11. USB 3.2 Gen 1 Type-A Este monitor es compatible con Super-Speed USB 3.2 Gen 1 (5 Gbps).
1.5 Presentación del monitor 1.5.1 Utilizar los botones de control Utilice los botones de control situados en la parte inferior del monitor para ajustar la configuración de la imagen. 6 1. 4 3 2 1 Botón de alimentación o indicador de alimentación: • Permite encender y apagar el monitor. • En la tabla siguiente encontrará la definición del color del indicador de alimentación. 2. • • • 3.
5. Acceso directo 1: • Presione este botón para mostrar el menú OSD cuando dicho menú está desactivado. • Por defecto: Tecla de acceso directo de Brillo • Para cambiar la función de la tecla de acceso rápido, vaya al menú Acceso directo > Acceso directo 1. 6. Acceso directo 2: • Presione este botón para mostrar el menú OSD cuando dicho menú está desactivado.
2.1 Ajustar el monitor • Para conseguir la mejor visualización posible, es recomendable mirar a toda la superficie del monitor y, a continuación, ajustarlo con el ángulo que le resulte más cómodo. • Sujete la base para impedir que el monitor se caiga cuando cambie su ángulo. • Puede ajustar el ángulo del monitor entre +35˚ y -5˚, así como girarlo 45˚ hacia la izquierda o hacia la derecha.
2.2 Desmontar el brazo y la base (para el soporte para pared VESA) El brazo desmontable de este monitor LCD está especialmente diseñado para soportes para pared VESA. Para desmontar el brazo y la base 2-2 1. Desconecte los cables de alimentación y señal. Coloque el monitor boca abajo con cuidado sobre su embalaje de EPS. 2. Presione el botón de liberación rápida de la cubierta trasera. 3. Desmonte el pedestal (brazo y base) del monitor.
2.
3.1 Menú en pantalla (OSD) 3.1.1 Cómo realizar la reconfiguración ProArt Preset ASUS PA279CV Modo Estándar DisplayPort 3840x2160@60Hz ProArtPreset Modo Estándar Modo sRGB Modo Rec. 709 Modo DCI-P3 HDR Modo DICOM Modo Escenario ProArt Preset ASUS PA279CV Modo Estándar DisplayPort 3840x2160@60Hz ProArtPreset Modo De Lectura Modo Sala Oscura Modo Represent. Rápida Modo Usuario 1 Modo Usuario 2 1. Presione cualquier botón (excepto el botón de alimentación) para mostrar el menú OSD. 2.
3.1.2 1. Presentación de las funciones OSD ProArtPreset Esta función contiene doce funciones secundarias que puede seleccionar según sus preferencias. ProArt Preset ProArtPreset ASUS PA279CV Modo Estándar DisplayPort 3840x2160@60Hz Modo Estándar Modo sRGB Modo Rec. 709 Modo DCI-P3 HDR Modo DICOM Modo Escenario ProArt Preset ProArtPreset ASUS PA279CV Modo Estándar DisplayPort 3840x2160@60Hz Modo De Lectura Modo Sala Oscura Modo Represent.
• Modo Represent. Rápida: Simula la visualización como un rendimiento de alta frecuencia de actualización para generar diferentes frecuencias de retroiluminación. Modo Represent. Rápida solo se puede activar a 60 Hz. Para activar esta función, debe desactivar Adaptive-Sync. Las opciones Brillo y ASCR no se pueden ajustar cuando se usa esta función. • Modo Usuario 1: Le permite realizar ajustes de color en la configuración avanzada.
2. Filtro de luz azul Esta opción permite ajustar el nivel de energía de la luz azul emitida por la retroiluminación de LED. ProArt Preset Filtro de luz azul ASUS PA279CV Modo Estándar DisplayPort 3840x2160@60Hz Nivel 0 Nivel 1 Nivel 2 Nivel 3 Nivel 4 • Nivel 0: Sin cambios • Cuando la opción Filtro de luz azul está activada, la configuración predeterminada del Modo Estándar se importará automáticamente. • En Nivel 1 y Nivel 3, el usuario puede configurar la función Brillo.
3. Paleta de ProArt ProArt Preset Paleta de ProArt ASUS PA279CV Modo Estándar DisplayPort 3840x2160@60Hz Brillo Contraste Saturación Matiz Temp del color Gamma Nivel de negro ProArt Preset Paleta de ProArt ASUS PA279CV Modo Estándar DisplayPort 3840x2160@60Hz Color Restablecimiento color • Brillo: El intervalo de ajuste está comprendido entre 0 y 100. • Contraste: El intervalo de ajuste está comprendido entre 0 y 100. • Saturación: El intervalo de ajuste está comprendido entre 0 y 100.
P3-Theater solo está disponible cuando se selecciona Modo DCI-P3. • Restablecimiento color: * Rest. color del modo actual: Permite restablecer los valores predeterminados de fábrica de la configuración del color del modo de color actual. * Rest. color de todos los modos: Permite restablecer los valores predeterminados de fábrica de la configuración del color de todos los modos de color. 4.
5. Sonido En esta función principal, puede ajustar las opciones Volumen, Silencio y Fuente. ProArt Preset Sonido ASUS PA279CV Modo Estándar DisplayPort 3840x2160@60Hz Volumen Silencio Fuente 6. • Volumen: permite ajustar el nivel de volumen de salida. • Silencio: Permite ENCENDER o APAGAR el silenciamiento del audio. • Fuente: decide la fuente de la que procede el sonido del monitor.
• La fuente principal y la fuente secundaria están disponibles en la siguiente tabla. Fuente secundaria Fuente princip. 7. HDMI-1 HDMI-2 DisplayPort USB Type-C HDMI-1 HDMI-2 DisplayPort USB Type-C ND ND Aceptar Aceptar ND ND Aceptar Aceptar Aceptar Aceptar ND ND Aceptar Aceptar ND ND Selección de entrada Seleccione la fuente de entrada entre HDMI-1, HDMI-2, DisplayPort, USB Type-C y habilitar y deshabilitar la señal de entrada Detecc. autom. fuente.
8. Config. Sistema Config. Sistema ASUS PA279CV Modo Estándar DisplayPort 3840x2160@60Hz Adaptive-Sync Configuración USB Ahorro de energía Config. OSD QuickFit Secuencias DisplayPort Bloqueo de teclas Config.
* USB 3.2 Gen 1: La velocidad de transferencia de datos de acuerdo con la especificación 3.2 Gen 1 en el puerto USB Tipo C solo puede generar la resolución máxima de 4K2K 30 Hz. * USB 2.0: La velocidad de transferencia de datos de acuerdo con la especificación 2.0 en el puerto USB Tipo C solo puede generar la resolución máxima de 4K2K a 60 Hz. 3-10 • La velocidad de transferencia de datos seguirá siendo USB 3.2 Gen 1 cuando se use un cable USB Tipo C a A.
* Ruler: Este patrón presenta una regla física en el lado superior izquierdo. Puede presionar el botón Volver durante más de 3 segundos para cambiar las medidas entre métricas e imperiales. 5 10 15 20 25 30 5 10 15 * Alignment: Facilita a los diseñadores y usuarios la organización del contenido y el diseño en una página y, al mismo tiempo, les ayuda a conseguir un aspecto coherente. Alignment Grid * A4: Permite a los usuarios ver sus documentos a tamaño real en la pantalla.
• 9. Reset Todo: seleccione “Sí” para revertir el modo predeterminado de fábrica en toda la configuración. Acceso directo Seleccione esta opción para establecer dos botones de acceso directo. El usuario puede seleccionar entre las opciones Filtro de luz azul, Brillo, Contraste, Configuración PIP/PBP, Temp del color, Volumen, Modo sRGB, Modo Rec. 709, Modo DICOM, Modo Usuario 1, Modo Usuario 2 y establecerlas como tecla de acceso directo.
3.2 Especificaciones Modelo PA279CV Tamaño del panel 27” AN (68,47cm) Resolución máxima Brillo (típ.) Relación de contraste intrínseco (típ.) Ángulo de visión (CR=10) Colores de visualización Saturación de color 3840x2160 a 60 Hz 350 cd/m2 1000:1 178° (V), 178° (H) 1070 M sRGB 100 % Tiempo de respuesta 5 ms (gris a gris) Altavoz satélite 2W x 2 estéreo Salida para auriculares Sí Sonido de HDMI Sí Entrada HDMI Sí Entrada DisplayPort Puerto USB Consumo encendido (máx.
3.3 Solucionar problemas (preguntas más frecuentes) Problema 3-14 Solución posible El indicador LED de alimentación no se ENCIENDE • Presione el botón para comprobar si el monitor se encuentra en el modo ENCENDIDO. • Compruebe si el cable de alimentación está correctamente conectado al monitor y a la toma de corriente. • Compruebe la función Indicador de encendido en el menú principal OSD. Seleccione “ENCENDER” para iluminar el LED de alimentación.
3.