User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Attaching the arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-9ASUS PA27UCX Series LCD Monitor
7. Input Select
In this function, you can select your desired input source.
ASUS PA27UCX
Standard Mode DisplayPort 3840 x 2160@ 60Hz
Input Select
HDMI-1
HDMI-2
DisplayPort
Type C
8. System Setup
Allows you to adjust the system.
HDR Preview
Adaptive-Sync
Dynamic Dimming
Power Saving
OSD Setup
Language
Calibration Reminder
System Setup
ASUS PA27UCX
Standard Mode DisplayPort 3840 x 2160@ 60Hz
• HDR Preview: Allows you to preview non-HDR content performance with
HDR10 and HLG mapping. While HDR Preview function is on, HDR_PQ
DCI, HDR_PQ Rec2020, and HDR_HLG can be chosen.
• Adaptive-Sync (DisplayPort/HDMI only): Allows an Adaptive-Sync
supported* graphics source to dynamically adjust display refresh rate
based on typical content frame rates for power efcient, virtually stutter
free and low-latency display update.
* Adaptive-Sync can only be activated within 40Hz ~ 60Hz.
* For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures.
To activate this function, you need to do the following: turn off Motion Sync, turn
off PIP/PBP mode and set DisplayPort Stream to DisplayPort 1.2.
• Dynamic Dimming: Synchronizes with contents while contrast
changing to execute backlight dynamic dimming. You can adjust the
synchronization speed as “Fast”, “Medium” or “Gradual”.