Monitor LCD Seria PA27UCX Ghidul utilizatorului
Prima ediţie Martie 2020 Drepturi de autor © 2020 ASUSTeK COMPUTER INC. Toate drepturile rezervate. Nicio parte din acest manual, inclusiv produsele sau software-urile descrise în acesta, nu poate fi reprodusă, transmisă, transcrisă, stocată într-un sistem de recuperare sau tradusă în orice limbă sau prin orice mijloace, cu excepţia documentaţiei păstrate de cumpărător în scopuri de recuperare, fără permisiunea scrisă expresă a companiei ASUSTeK COMPUTER INC. („ASUS”).
Cuprins Cuprins......................................................................................................... iii Notificări....................................................................................................... iv Informaţii privind siguranţa......................................................................... v Îngrijire şi curăţare...................................................................................... vi Takeback Services......................................
Notificări Declaraţia Comisiei federale de comunicaţii Acest dispozitiv respectă Secţiunea 15 din Regulamentul FCC. Funcţionarea presupune următoarele două condiţii: • Acest dispozitiv nu provoacă interferenţe dăunătoare şi • Acest dispozitiv trebuie să accepte orice interferenţă primită, inclusiv interferenţele care pot cauza o funcţionare nedorită. Acest echipament a fost testat şi s-a dovedit că respectă limitele pentru un dispozitiv digital de Clasa B, conform Secţiunii 15 din Regulamentul FCC.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouiller du Canada. Informaţii privind siguranţa • Înainte de configurarea monitorului, citiţi cu atenţie toate documentele care v-au fost furnizate în pachet. • Pentru prevenirea incendiilor sau a pericolelor electrice, nu expuneţi niciodată monitorul la ploaie sau umezeală. • Nu încercaţi niciodată să deschideţi carcasa monitorului.
• Reglarea controalelor de volum, precum şi egalizatorul altor setări decât poziţia centrală pot mări tensiunea de ieşire audio/căşti şi, prin urmare, nivelul de presiune al sunetului. Acest simbol cu un coş de gunoi tăiat indică faptul că produsul (echipament electric sau electronic, şi bateria cu celule care conţin mercur) nu trebuie eliminate la un loc cu deşeurile municipale. Vă rugăm să verificaţi reglementările locale pentru eliminarea produselor electronice.
Simboluri utilizate în acest ghid ATENŢIE: Informaţie pentru prevenirea accidentărilor personale atunci când încercaţi să rezolvaţi o sarcină. AVERTISMENT: Informaţie pentru prevenirea daunelor componentelor atunci când încercaţi să rezolvaţi o sarcină. IMPORTANT: Informaţii pe care TREBUIE să le urmaţi pentru rezolvarea unei sarcini. OBSERVAŢIE: Sfaturi şi informaţii suplimentare pentru a vă ajuta să rezolvaţi o sarcină.
viii
1.1 Bun venit! Vă mulţumim că aţi achiziţionat monitorul LCD ASUS®! Cel mai nou monitor LCD cu ecran lat de la ASUS oferă un afişaj mai mare, mai luminos şi mai clar, plus o serie de funcţii care vă îmbunătăţesc experienţa de vizionare. Cu aceste funcţii vă puteţi bucura de confortul şi experienţa vizuală încântătoare pe care v-o oferă monitorul! 1.
1.3 Prezentare monitor 1.3.1 Partea frontală 1 2 3 4 5 6 7 Menu Close Input Select QuickFit Brightness HDR 1. Butonul Meniu (5 direcţii): • Apăsaţi acest buton pentru a intra în meniul OSD. • Acţionează elementele selectate din meniul OSD. • Măreşte/micşorează valorile sau mută selecţia în sus/jos/stânga/ dreapta. 2. Buton închidere: • Iese din meniul OSD. • Activează şi dezactivează funcţia Blocare taste, la o apăsare continuă de aproximativ 5 secunde.
5. Scurtătură 1 • Implicit: Tasta rapidă Strălucire • Pentru a schimba funcţia tastei rapide, accesaţi meniul Scurtătură > Scurtătură 1. 6. Scurtătură 2 • Implicit: Tastă rapidă HDR • Pentru a schimba funcţia tastei rapide, accesaţi meniul Scurtătură > Scurtătură 2. 7. Buton de pornire/indicator de pornire • Porneşte/opreşte monitorul. • Descrierea culorilor indicatorului de pornire este prezentată în tabelul de mai jos. 1.3.
7. Port USB 3.1 tip C. Acest port se utilizează pentru conexiunea cu un dispozitiv compatibil DisplayPort/USB de tip C. De asemenea, acest port se utilizează şi cu un cablu ascendent USB, compatibil cu alimentare şi transfer de date prin USB. Acest monitor este compatibil cu USB 3.1 SuperSpeed (5 Gb/s). Portul furnizează alimentare cu energie de 5 V/ 3 A.
A4 A4 3. B5 Funcţia QuickFit oferă dimensiunea de hârtie standard B5, iar utilizatorii îşi pot vizualiza documentele pe ecran la dimensiunea reală. B5 B5 4. Scrisoare Funcţia QuickFit (Potrivire rapidă) oferă dimensiuni standard de hârtie în format scrisoare pentru ca utilizatorii să vizualizeze documentele la dimensiune reală pe ecran. Scrisoare Letter 5.
Fotografie 4x6, 3x5, 2x2 Fotografie 8x10, 5x7 3x5 4x6 8x10 2x2 5x7 6. Personalizare Puteţi decide dimensiunea cadrului prin mişcarea butonului Meniu (5 moduri) în sus/jos sau la stânga/dreapta. Puteţi apăsa pe butonul Meniu (5 moduri) mai mult de 3 secunde pentru a comuta măsurătorile între milimetri şi inchi. Personalizare H16 V15 7. Riglă Acest model prezintă o riglă fizică pe partea de sus şi pe partea stângă.
2.1 Montarea piciorului/bazei Pentru asamblarea bazei monitorului: 1. Scoateţi cu grijă monitorul din cutie. Ţineţi ferm monitorul şi nu apăsaţi pe ecranul panoului când îl ridicaţi pentru a evita defecţiunile accidentale. 2. Plasaţi monitorul cu faţa în jos pe o masă (Figura 2). 3. Ataşaţi suportul pe spatele monitorului, asigurându-vă că lamela de pe braţ intră în canelura de pe spatele monitorului. (Figura 3).
2.3 • Kitul de montare pe perete VESA (100 x 100 mm) este achiziţionat separat. • Folosiţi numai Suporturi pentru montaj pe perete din lista UL, cu o greutate/sarcină minimă de 22,7 kg (dimensiune şuruburi: M4 x 10 mm). Reglarea monitorului • Pentru o vizualizare optimă, vă recomandăm să priviţi direct spre monitor şi apoi să reglaţi monitorul la unghiul care vă este cel mai confortabil. • Ţineţi suportul pentru a preveni căderea monitorului în timpul modificării unghiului.
Pivotarea monitorului 1. Ridicaţi monitorul în poziţia cea mai înaltă. 2. Înclinaţi monitorul la unghiul maxim. 3. Pivotaţi monitorul la unghiul dorit. +23° ~ -5° 90° 90° Este normal ca monitorul să se clatine puţin atunci când reglaţi unghiul de vizualizare. 4. Elementul din meniul OSD se va roti automat atunci când se roteşte monitorul.
2.4 1. Conectarea cablurilor Conectaţi cablurile respectând următoarele instrucţiuni: Numai pentru service • Pentru conectarea cablului de alimentare: Conectaţi un capăt al cablului de alimentare la portul de intrare AC al monitorului şi celălalt la o priză. • Pentru a conecta cablul HDMI/DisplayPort/USB de tip C*: a. Conectaţi un capăt al cablului HDMI/DisplayPort/USB de tip C* la mufa HDMI/DisplayPort/USB de tip C a monitorului. b.
2. Aranjarea cablurilor: Vă recomandăm să urmaţi ordinea de mai jos petru a trage cablul prin slotul pentru gestionarea cablurilor de pe suport. 1 3. 3 3 2 5 5 4 4 4 4 6 Dacă este nevoie, ataşaţi capacul portului de intrare/ieşire. 2.5 Pornirea monitorului Apăsaţi butonul de pornire . Consultaţi paginile 1-2 pentru locaţia butonului de pornire. Indicatorul de pornire se va aprinde cu o lumină de culoare albă, arătând că monitorul este PORNIT.
2-6 Capitolul 2: Configurare
3.1 Meniu OSD (On-Screen Display) 3.1.1 Mod de reconfigurare ProArt Preset ASUS PA27UCX Mod standard DisplayPort 3840 x 2160@ 60Hz Mod standard Mod sRGB Mode Adobe RGB Mod Rec. 2020 Mod DCI-P3 Mod DICOM Mod Rec. 709 1. Apăsaţi 2. Mişcaţi butonul Meniu (5 direcţii) în sus/jos/stânga/dreapta pentru a naviga printre funcţii. Selectaţi funcţia dorită şi apăsaţi butonul Meniu (5 direcţii) pentru a o activa.
3.1.2 1. Prezentarea funcţiei OSD ProArt Preset Această funcţie conţine 13 sub-funcţii pe care le puteţi selecta pentru preferinţele dumneavoastră. Fiecare mod are opţiunea Resetare, permiţându-vă să păstraţi setarea sau să reveniţi la modul presetat. ProArt Preset ASUS PA27UCX Mod standard DisplayPort 3840 x 2160@ 60Hz Mod standard Mod sRGB Mode Adobe RGB Mod Rec. 2020 Mod DCI-P3 Mod DICOM Mod Rec. 709 • Mod standard: Cea mai bună alegere pentru editarea documentelor.
* PQ Clip: Menţine curba PQ până la afişarea luminanţei maxime cu acurateţe. Valoarea codului ST2084 mai mare decât maximul afişajului va fi afişată la luminanţă maximă. De asemenea, vă oferim maximum 300 de niţi pentru utilizare. * PQ Basic: Prezintă performanţa generală HDR pentru afişajele care acceptă HDR. • HDR_HLG: • HDR_DolbyVision: * • HLG BT2100: Compatibil cu BT2100. * Luminos: Compatibil cu setările modului Luminos DolbyVision.
Funcţie DICOM Culoare temperatură Permanent (6.500K) Strălucire 50 Contrast 80 Claritate Activare (0) Mediu (50) Mediu (50) Activare (implicit) Activare (implicit) Activare (automat) Activare (2.2) Activare (Oprit) Activare (0) Saturaţie Nuanţă Culoare Nivel negru Interval de intrare Gamma Compensare uniformitate VividPixel 2. HDR_HLG HDR_ DolbyVision Permanent (6.500K) Permanent (6.500K) Mod Utilizator 1/Mod Utilizator 2 Permanent (6.
Consultaţi recomandările de mai jos, pentru a atenua stresul asupra ochilor: 3. • Dacă se lucrează ore îndelungate, se recomandă ca utilizatorii să-şi mai mute privirea de la ecran o anumită perioadă de timp. După aproximativ 1 oră de lucru continuu la computer, se recomandă să fie luate scurte pauze (cel puţin 5 minute). Pauzele scurte şi frecvente sunt mai eficiente decât o singură pauză mai lungă.
• Nuanţă: Modifică culoarea imaginii între verde şi mov. • Culoare temperatură: Conţine 5 moduri, inclusiv 9300K, 6500K, 5500K, 5000K şi P3-Teatru. P3-Teatru este disponibil doar atunci când este selectat modul DCI-P3. • Gama: Vă permite să setaţi modul de culoare la 2.6, 2.4, 2.2, 2.0 sau 1.8. • Nivel negru: Cel mai întunecat nivel de afişare. • * Semnal: Pentru a regla primul nivel de semnal iniţializat al celui mai întunecat nivel de gri.
• • Control aspect: Reglează raportul de aspect la plin, 4:3, 1:1 sau OverScan. • Pentru a activa această funcţie, va trebui să procedaţi astfel: dezactivaţi funcţia PBP. • Opţiunea 4:3 este disponibilă numai când sursa de intrare este în formatul 4:3. Funcţia OverScan este disponibilă doar pentru sursa de intrare HDMI. Compensare uniformitate: Reglează diferite zone de pe ecran pentru a reduce orice erori de uniformitate a ecranului, oferind o luminozitate şi o culoare consistentă pe întregul ecran.
6. Setare PIP/PBP Setarea PIP/PBP vă permite să deschideţi altă sub-fereastră conectată la altă sursă video, pe lângă fereastra principală din sursa dumneavoastră video originală. Prin activarea acestei funcţii, monitorul afişează până la 2 imagini din surse video diferite. Pentru a activa această funcţie, va trebui să procedaţi astfel: dezactivaţi funcţiile Estompare dinamică, Sincronizare adaptivă şi HDR pe dispozitivul dvs.
7. Selectare introducere În această funcţie vă puteţi selecta sursa de intrare dorită. Selectare introducere ASUS PA27UCX Mod standard DisplayPort 3840 x 2160@ 60Hz HDMI-1 HDMI-2 DisplayPort Type C 8. Configurare sistem Vă permite să configuraţi sistemul.
Pentru a activa această funcţie, va trebui să procedaţi astfel: dezactivaţi funcţia PIP/PBP. • • • • • 3-10 Configurare USB: Configurează setarea portului USB de tip C. Parametrul Configurare USB afectează rezoluţia de ieşire doar când sursa este conectată la un port USB de tip C. Din cauza diferenţelor tehnologice dintre USB 2.0 şi USB 3.0, transferul maxim de date USB (lăţime de bandă şi alte caracteristici corelate) variază şi, aşadar, influenţează rezoluţia maximă de ieşire. * USB 3.
Această funcţie este activată atunci când Modul utilizator 1 sau Modul utilizator 2 este selectat. • Flux DisplayPort: Compatibilitatea cu placa video. Selectaţi DisplayPort 1.1 sau DisplayPort 1.2 după versiunea DP a plăcii video. Interfaţa DisplayPort 1.1 este disponibilă doar când funcţia Sincronizare adaptivă este dezactivată. • • • Blocare taste: Pentru dezactivarea tuturor tastelor pentru funcţii.
3.2 Prezentare specificaţii Tip panou Dimensiune panou Rezoluţie maximă Dimensiune pixeli Strălucire Raport contrast (tipic) Raport contrast (max.) Unghi de vizualizare (O/V) CR>10 Culori afişaj Gamut culoare Timp de răspuns Selecţie ProArt Preset Selecţie culoare temperatură Intrare digitală Mufă jack pentru căşti Port USB 3.
Mai multe limbi Accesorii Conformitate şi standarde 21 de limbi (engleză, franceză, germană, italiană, spaniolă, olandeză, portugheză, rusă, cehă, croată, poloneză, română, maghiară, turcă, chineză simplificată, chineză tradiţională, japoneză, coreeană, thailandeză, indoneză, persană) Ghid de pornire rapidă, Card de garaniţie, Cablu de alimentare, Cablu HDMI, Cablu USB de tip C, Cablu DisplayPort, Cablu USB de tip C la USB de tip A, Capac port intrare/ieşire, Raport test de calibrare culoare, Calibrator
3.3 Dimensiuni contur Pivot: +/- 90 degree Tilt: -5~23 degree Swivel: +/- 60 degree Lift: 120mm 90 23 5 157,93 [6.2] 169,67 [6.7] 199,62 [7.9] 211,36 [8.3] 544,5 [21.4] 167,67 [6.6] 177,35 [7.0] 228,8 [9.0] 298,08 [11.7] 162,97 [6.4] 55 [2.2] 625,2 [24.6] 601,6 [23.7] 596,16 [23.5] 324 [12.8] AA-Center 14,53 [.6] 14,52 [.6] 16,08 [.6] 48,9 [1.9] 335,34 [13.2] 92,65 [3.6] 338,97 [13.3] 367,15 [14.5] 90 60 7,86 [.3] 424,5 [16.7] 91,27 [3.6] 48,9 [1.9] 198,09 [7.8] 14,38 [.6] 120 [4.
3.4 Depanare (Întrebări frecvente) Problemă LED-ul de pornire nu este PORNIT LED-ul de pornire este auriu şi ecranul nu afişează nicio imagine Imaginea afişată este prea luminoasă sau prea întunecată Imaginea afişată sacadează sau pe aceasta se observă un model de undă Imaginea afişată are defecte de culoare (albul nu arată alb) Soluţie posibilă • Apăsaţi butonul pentru a verifica dacă monitorul este pe modul PORNIT.
3.
Rezoluţie 1920 × 1080p 1920 × 1080i 1440 x 480P 1440 x 576P 1280 × 720p Frecvenţă verticală (Hz) Frecvenţă orizontală (KHz) 50 56,25 59,94 67,43 60 67,5 50 28,13 59,94 33,72 60 33,75 59,94 31,47 60 31,5 50 31,25 50 37,5 59,94 44,95 60 45 * Modurile care nu apar în tabel s-ar putea să nu fie acceptate. Pentru rezoluţie optimă, vă recomandăm să alegeţi un mod care apare în tabelul de mai sus.