PA328QV-seriens LCD-skærm Brugervejledning
Første udgave December 2021 Copyright © 2021 ASUSTeK COMPUTER INC. Alle rettigheder forbeholdes. Inden del af denne vejledning, herunder produkterne og softwaren, beskrevet heri, må genskabes, overføres, transskriberes, gemmes i et afhentningssystem eller oversættes til et andet sprog på nogen måde eller med nogen som helst midler, undtagen dokumentation, gemt af køberen for sikkerhedskopieringsformål, uden udtrykkelig skriftlig tilladelse fra ASUSTeK COMPUTER INC. (“ASUS”).
Indhold Indhold.......................................................................................................... iii Bemærkninger............................................................................................. iv TCO certificeret............................................................................................ vi Oplysninger om sikkerhed......................................................................... vii Vedligeholdelse og rengøring...................................
Bemærkninger Meddelelse fra USA's Føderale Kommunikationskommission (FCC) Denne enhed opfylder Kapitel 15 i FCC-reglerne. Betjening er underlagt følgende to betingelser: • • Denne enhed må ikke udsende skadelig interferens, og Denne enhed skal acceptere modtaget interferens, inklusiv interferens, der kan forårsage uønsket drift. Dette udstyr er testet og fundet at være i overensstemmelse med grænserne for klasse B digitale enheder, ifølge Kapitel 15 i FCC-reglerne.
BEMÆRK: Energy Star understøttes IKKE på FreeDOS- eller Linux-baserede operativsystemer. Canadisk afdeling for internationale affærer Dette digitale apparat overstiger ikke Klasse B begrænsningerne for radiostøjemission fra digitale apparater, som det er fremsat i bestemmelserne om radiointerferens i Canadisk afdeling for internationale affærer. Dette digitale klasse B apparat er i overensstemmelse med Canadisk ICES-003.
TCO certificeret A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Oplysninger om sikkerhed • Inden opsætning af skærmen skal du omhyggeligt læse al dokumentationen, der fulgte med pakken. • Du må aldrig udsætte skærmen for regn eller fugt for at undgå brand og fare for stød. • Forsøg aldrig at åbne skærmens kabinet. Der er farlig højspænding inden i skærmen, der kan resultere i alvorlig personskade. • Hvis strømforsyningen (adapteren) går i stykker må du ikke forsøge at reparere den selv. Kontakt en fagmand eller din forhandler.
Vedligeholdelse og rengøring • Det er en god ide at frakoble kabler og elledning inden du løfter eller flytter skærmen. Brug korrekt løfteteknik når du flytter skærmen. Når du løfter eller bærer skærmen skal du holde skærmen i dens kanter. Løft ikke skærmen med standeren eller elledningen. • Rengøring. Sluk for skærmen og frakobl elledningen. Rengør skærmens overflade med en fnugfri klud, der ikke ridser. Stædige pletter kan fjernes med en klud, fugtet med et mildt rengøringsmiddel.
Hvor kan du finde yderligere oplysninger Se følgende kilder for yderligere oplysninger, samt for opdateringer til produkt og software. 1. ASUS's websted ASUS's websteder over hele verden har oplysninger om ASUS hardware- og softwareprodukter. Se http://www.asus.com. 2. Ekstra dokumentation Din produktpakke indeholder muligvis ekstra dokumentation, der kan være tilføjet af forhandleren. Disse dokumenter er ikke en del af standard pakken.
x
1.1 Velkommen! Mange tak for dit køb af ASUS® LCD-skærmen! Den nyeste LCD-bredskærm fra ASUS har et bredere, lysere og mere krystalklart display, plus en lang række funktioner, der forbedrer din oplevelse. Nu kan du nyde den enkle og fremragende visuelle oplevelse, som skærmen leverer! 1.
1.3 Introduktion til skærm 1.3.1 Set forfra 1 1. 3 4 5 6 7 Tænd/sluk-knap-/strømindikator • Tænder og slukker for skærmen. • Strømindikatorens farvebetydning kan findes i tabellen nedenfor. • 2. Status Beskrivelse Hvid Ravgul Slukket Til Standbytilstand Slukket Tryk på denne knap for at vise OSD-menuen når OSD ikke er aktiveret. Nulstilling-knap: • • 3. Tryk på denne knap for at vise OSD-menuen når OSD ikke er aktiveret. Vælger tilstande for ProArt Preset.
5. Genvej 1 • Tryk på denne knap for at vise OSD-menuen når OSD ikke er aktiveret. • Standard: Genvejstast for Brightness (Lysstyrke) • Hvis du vil ændre genvejsfunktionen skal du gå til Shortcut (Genvej) > Shortcut 1 (Genvej 1)-menu. • Tryk på denne knap for at vise OSD-menuen når OSD ikke er aktiveret. • Afslutter OSD-menuen. 6. Afslut-knap: 7. Menu (5-vejs)-knap: • Tryk på denne knap for at vise OSD-menuen når OSD ikke er aktiveret. Tryk på knappen igen for at åbne OSD- hovedmenuen.
1.3.2 Set bagfra 10 1 2 3 4 5 6 7 8 9 10 10 1. Hul til Kensington-lås. 2. Tænd/sluk-knap. Tryk på knappen for at tænde/slukke for strømmen. 3. AC-IN-port. Dette stik er til elledningen. 4. Øretelefonstik. Dette stik er kun tilgængeligt når der er tilsluttet et HDMI/ DisplayPort-kabel. 5. HDMI-1-port. Dette stik er til tilslutning til en HDMI-kompatibel enhed. 6. HDMI-2-port. Dette stik er til tilslutning til en HDMI-kompatibel enhed. 7. DisplayPort in.
ASUS PA328QV-seriens LCD-skærm 1-5
1-6 Kapitel 1: Introduktion til produkt
2.1 Samling af skærmens arm/fod Sådan påsættes skærmens fod: 1. Læg skærmen ned med skærmsiden vendt nedad på et bord. 2. 3. Fastgør armen på skærmen. Fastgør foden på armen, og kontroller, at fligen på armen passer ind i rillen på foden. 4. Fastgør foden til armen ved at spænde den medfølgende møtrik. Vi anbefaler, at du dækker bordets overflade med et blødt klæde for at undgå at beskadige skærmen. 3 2 1 Fodens skruestørrelse: M6 x 16,2 mm. 2.
Vi anbefaler, at du dækker bordets overflade med et blødt klæde for at undgå at beskadige skærmen. 2.3 • VESA vægmonteringssættet (100 x 100 mm) skal købes særskilt. • Brug kun det UL-mærkede vægmonteringsbeslag med en minimums vægt/belastningskapacitet på 22,7 kg (skruestørrelse: M4 x 10 mm) Justering af skærmen • For at opnå en optimal visning anbefaler vi, at du ser direkte på skærmen og derefter justerer skærmen til den vinkel, der er mest komfortabel for dig.
90° 90° Det er normalt, at skærmen ryster lidt mens du justerer visningsvinklen. 2.4 Tilslutning af kablerne Tilslut kablerne som i de følgende instruktioner: Kun for service • Sådan tilsluttes elledningen: Tilslut en ende af elledningen på sikker vis til skærmens AC-indgangsport, og den anden ende til en stikkontakt. • Sådan tilsluttes DisplayPort/HDMI-kablet: a. Tilslut den ene ende af DisplayPort/HDMI-kablet til skærmens DisplayPort/HDMI-stik. b.
Hvis du har behov for at udskifte strømkablet eller forbindelseskablet/kablerne, bedes du kontakte ASUS kundeservice. 2.5 Tænd for skærmen Tryk på tænd/sluk-knappen . Se på side 1-2 for placeringen af tænd/sluk-knappen. Strømindikatoren lyser hvidt når der er TÆNDT for skærmen.
ASUS PA328QV-seriens LCD-skærm 2-5
2-6 Kapitel 2: Opsætning
3.1 OSD (On-Screen Display)-menu 3.1.1 Konfiguration PA328QV 2560x1440 Signal DisplayPort Brightness 100 sRGB Mode Blue Light Image Preset Standard Mode Standard Mode Preset Palette 60Hz Rec 709 Mode DCI-P3 Mode HDR Scenery Mode Reading Mode Rapid Rendering Mode Sound Back Enter Exit 1. Tryk på en vilkårlig knap for at vise OSD-menuen. 2. Tryk på 3. Flyt -menu (5-vejs)-knappen op/ned/venstre/højre for at navigere i funktionerne.
3.1.2 1. Indledning til OSD-funktionen Preset Denne funktion indeholder 10 underfunktioner, du kan vælge, afhængigt af dine behov. Hver tilstand har et Reset (Nulstil)-valg, du kan bruge til at vedligeholde eller nulstille tilstanden.
Denne funktion aktiveres på følgende måde: Slå Adaptive-Sync. Brightness (Lysstyrke), Blue Light (Blåt lys), Adaptive-Sync, Backlight (Baggrundslys) og Trace Free kan ikke justeres når du bruger denne funktion. • User Mode 1 (Brugertilstand 1)/User Mode 2 (Brugertilstand 2): Giver dig mulighed for at udføre farvejusteringer i Advanced Setting (Avanceret indstilling). Nedenstående tabel viser standard konfigurationerne for hver forudindstilet tilstand: StanFunktion dard-tilstand sRGB-tilstand Rec.
2. Blue Light (Blåt lys) I denne funktion kan du justere filterniveauet for blåt lys. PA328QV 2560x1440 Preset Standard Mode Signal DisplayPort Brightness 100 Level 0 Preset Level 1 Blue Light Palette 60Hz Level 2 Level 3 Level 4 Image Sound Back Enter Exit • Level 0 (Niveau 0): Ingen ændring. • Level 1~4 (Niveau 1~4): Des højere niveau, des mindre spredes det blå lys.
3. Palette Indstil en ønsket farveindstilling fra denne menu. PA328QV 2560x1440 Brightness Preset Blue Light Palette Image Preset Standard Mode 60Hz Signal DisplayPort Brightness 100 100 Contrast 80 Saturation 50 Hue 50 Color Temp. Gamma Black Level Color Sound Back Enter Exit • Brightness (Lysstyrke): Justeringsområdet er fra 0 til 100. • Contrast (Kontrast): Justeringsområdet er fra 0 til 100. • Saturation (Mætning): Justeringsområdet er fra 0 til 100.
4. Image (Billede) Indstil billedrelateret indstilling fra denne menu. PA328QV 2560x1440 Preset Blue Light Preset Standard Mode 60Hz Sharpness 0 Trace Free 60 Signal DisplayPort Brightness 100 Aspect Control Input Range Palette Image Sound Back Enter Exit • Sharpness (Skarphed): Justeringsområdet er fra 0 til 100. • Trace Free: Justerer skærmens responstid. • Aspect Control (Aspekt kontrol): Justerer skærmforholdet til Full (Fuld), 4:3, 1:1, 16:10 eller OverScan.
5. Sound (Lyd) Du kan justere Volume (Lydstyrke), Mute (Slå lyd fra) og Source (Kilde) i denne menu. PA328QV 2560x1440 Preset Blue Light Preset Standard Mode 60Hz Volume Signal DisplayPort Brightness 100 90 Mute Source Palette Image Sound Back 6. Enter Exit • Volume (Lydstyrke): Justeringsområdet er fra 0 til 100. • Mute (Slå lyd fra): Skifter mellem lyd fra/til. • Source (Kilde): Til indstilling af, hvilken kilde skærmens lyd kommer fra.
• PIP/PBP Mode (PIP/PBP-tilstand): Vælger PIP-, PBP-funktion, eller slår den fra. Hvis du vil indstille begge skærme til fuld skærm i PBP-tilstand, skal du indstille opløsningsindstillingerne for begge skærme til 1280 x 1440 i OSD-indstillingerne (og sørg for, at valgmuligheden for skalering er ”Maintain Display Scaling” (Oprethold skalering for skærm).) • PIP/PBP Source (PIP/PBP-kilde): Vælger videoens inputkilde blandt HDMI-1, HDMI-2 og DisplayPort. Tabellen nedenfor viser inputkildens kombinationer.
• 8. Ruler: Dette mønster viser en fysisk lineal øverst eller i venstres side. Du kan trykke på -menu (5-vejs)-knappen i mere end 3 sekunder for at skifte målinger mellem metrisk og imperisk. Signal I denne funktion kan du vælge den ønskede input-kilde.
* Adaptive-Sync kan kun aktiveres inden for 48Hz ~ 75Hz. * For understøttede GPU'er, computerens minimumskrav og driver skal du kontakte GPU'ens producent. * Du kan aktivere denne funktion på følgende måde: deaktiver PIP/PBP, indstil Aspect Control (Aspekt kontrol) til Full (Fuld), indstil DisplayPort Stream til DisplayPort 1.2.
10. Shortcut (Genvej) Definerer funktionerne for knapperne Genvej 1 og 2. PA328QV 2560x1440 PIP/PBP 60Hz Preset Standard Mode Signal DisplayPort Brightness 100 Shortcut 1 Shortcut 2 QuickFit Plus Signal Settings Shortcut Back • Enter Exit Shortcut 1 (Genvej 1)/Shortcut 2 (Genvej 2): Vælger en funktion for knapperne Genvej 1 og 2. Når der vælges eller aktiveres en given funktion, er genvejstasten muligvis ikke understøttet.
3.2 Oversigt over specifikationer Paneltype Panelstørrelse TFT LCD 31,5" (16:9, 80,098 cm) bredskærm Maks. opløsning Pixelstørrelse Lysstyrke (typ.) Kontrastforhold (typ.) Visningsvinkel (V/L) CR > 10 Skærmfarver Responstid Valg ProArt Preset Automatisk justering Valg af farvetemperatur Analogt input Digitalt input Digitalt output Øretelefonstik Lyd-input Højttaler (indbygget) USB 3.2 Gen 1-port.
Tilbehør Overensstemmelse og standarder Hurtig start-guide, garantikort, elledning, HDMI-kabel (ekstraudstyr), DisplayPort-kabel (ekstraudstyr), USB B til A-kabel (ekstraudstyr), testrapport over farvekalibrering, ProArt velkomstkort UL/cUL, FCC, ICES-3, EPEAT Bronze, CB, CE, ErP, WEEE, TUV-GS, TUV-Ergo, ISO 9241-307, UkrSEPRO, Ukraine Energy, CU, CCC, CEL, BSMI, RCM, VCCI, PSE, PC Recycle, J-MOSS, KC, KCC, e-Standby, PSB, Energy Star®, TCO, CEC, RoHs, Windows 10/11 WHQL, Flicker Free, Low Blue Light, CEC
23° 5° 30° 117 [4.606] Wall mount keep out area 67,33 [2.7] 21,35 [.8] 100 [3.937] 393.66 [15.5] Swivel: +/-30 Degree 30° 595,6 [23.4] 440.07 [17.3] Asus PA328QV Outline Dimension *Unit:mm(inch) Pivot: +/-90 Degree 73,32 [2.9] 130 [5.12] 714,8 [28.1] 698,11 [27.5] Active-Area 336,5 [13.2] 392,69 Active-Area [15.5] 20,04 [.8] 245 [9.6] 422,2 [16.6] 173,4 [6.8] M4*4-DEPTH 10mm 100 [3.937] 117 [4.606] Kapitel 3: OSD (On-Screen Display)-menu 3-14 Udvendige mål 3.
3.4 Fejlfinding (ofte stillede spørgsmål) Problem Mulig løsning Strøm-LED er ikke TÆNDT • Tryk på knappen for at kontrollere, om skærmen i TÆNDT. • Kontroller, om elledningen er tilsluttet korrekt til skærmen og stikkontakten. • Kontroller, og der er TÆNDT på tænd/slukknappen. Strøm-LED lyser ravgul og der er intet skærmbillede • Kontroller, om skærmen og computeren er TÆNDT. • Kontroller, at signalkablet er tilsluttet korrekt til skærmen og computeren.
3.
Timingnavn 480p 720p60 576p 720p50 1080p24 1080p25 1080p60 1080p50 Pixelformat 720 x 480 1280 x 720 720 x 576 1280 x 720 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 ASUS PA328QV-seriens LCD-skærm Vandret frekvens (kHz) 31,469 45 31,25 37,5 27 28,125 67,5 56,25 Vertikal frekvens (Hz) Pixelhastighed (MHz) 60 60 50 50 24 25 60 50 27 74,25 27 74,25 74,25 74,25 148,5 148,5 3-17
3-18 Kapitel 3: OSD (On-Screen Display)-menu