Řada PA329C LCD Monitor Uživatelská příručka
První vydání Únor 2019 Copyright © 2019 ASUSTeK COMPUTER INC. Všechna práva vyhrazena. Žádná část této příručky, včetně produktů a softwaru popsané v ní, nesmí být reprodukována, přenášena, přepisována, ukládána do systému pro opětovné zpřístupnění nebo překládána do jakéhokoli jazyka v jakékoli formě nebo jakýmkoli způsobem, kromě dokumentace uchovávané zákazníkem pro účely zálohování, bez výslovného předchozího písemného souhlasu společnosti ASUSTeK COMPUTER INC. („ASUS“).
Obsah Obsah .......................................................................................................... iii Poznámky..................................................................................................... iv Bezpečnostní informace.............................................................................. v Péče a údržba............................................................................................... vi Takeback Services............................................
Poznámky Vyjádření Federální komise pro komunikace (FCC) Toto zařízení splňuje podmínky části 15 směrnic FCC. Provoz podléhá následujícím dvěma podmínkám: • Zařízení nesmí způsobovat škodlivé rušení a • Zařízení musí přijmout jakékoli přijaté rušení, včetně rušení, které může způsobit nežádoucí provoz. Toto zařízení bylo testováno a vyhovuje omezením digitálních zařízení třídy B na základě části 15 směrnic FCC.
Bezpečnostní informace • Před instalací monitoru si pečlivě přečtěte veškerou dokumentaci dodanou v balení. • Monitor nikdy nevystavuje dešti ani vlhkosti, abyste předešli nebezpečí požáru nebo úrazu elektrickým proudem. • Nikdy se nepokoušejte otevřít skříň monitoru. Nebezpečná vysoká napětí uvnitř monitoru mohou způsobit vážné poranění. • Pokud se rozbije napájení, nepokoušejte se to opravit sami. Obraťte se na kvalifikovaného servisního technika nebo na váš maloobchod.
Péče a údržba • Před zvedáním nebo přemísťováním monitoru raději odpojte kabely a napájecí kabel. Při usazování monitoru používejte správný způsob zvedání. Při zvedání nebo přenášení uchopte monitor za jeho okraje. Displej nezvedejte za podstavec nebo kabel. • Čištění. Vypněte monitor a odpojte napájecí kabel. Povrch monitoru čistěte měkkým hadříkem, který nepouští vlas. Těžko odstranitelné skvrny lze odstranit hadříkem navlhčeným v jemném čisticím prostředku.
Kde najdete další informace Další informace a aktualizace týkající se produktu a software najdete v těchto zdrojích. 1. Internetové stránky ASUS Internetové stránky ASUS po celém světě poskytují aktualizované informace o produktech v oblasti hardware a software značky ASUS. Podívejte se na http://www.asus.com 2. Další dokumentace Balení vašeho produktu může obsahovat další dokumentaci, kterou tam mohl přidat váš prodejce. Tyto dokumenty nejsou součástí standardního balení.
viii
1.1 Vítejte! Děkujeme za zakoupení monitoru LCD ASUS®! Nejnovější monitor LCD v širokoúhlém formátu od společnosti ASUS nabízí širší, jasnější a křišťálově čistý displej a řadu funkcí, které umocňují váš zážitek z prohlížení. Díky těmto funkcím si můžete užívat komfort a mít skvělý vizuální zážitek, který monitor přináší! 1.
1.3 Úvod k monitoru 1.3.1 Čelní pohled 1 2 3 4 5 6 7 Menu Close Input Select HDR Brightness Blue Light Filter 1. Tlačítko Menu (5směrové): • Stisknutím tohoto tlačítka otevřete nabídku OSD. • Aktivuje vybrané položky nabídky OSD. • Zvyšuje/snižuje hodnoty nebo posunuje výběr nahoru/dolů/vlevo/vpravo. 2. Tlačítko zavřít: • Ukončení nabídky OSD. • Přepíná funkci Zámku kláves mezi zapnout a vypnout dlouhým stisknutím po dobu 5 sekund. 3.
• Pro změnu funkce klávesové zkratky přejděte na nabídku Zástupce > Zástupce 1. Zástupce 6. • Výchozí: Klávesová zkratka filtru modrého světla • Pro změnu funkce klávesové zkratky přejděte na nabídku Zástupce > Zástupce 2. 7. Tlačítko a indikátor napájení • Slouží k zapnutí a vypnutí monitoru. • Definici barvy indikátoru napájení ukazuje tabulka dole. 1.3.2 Stav Popis Bílá Oranžový Vyp. Zapnuto Pohotovostní režim Vyp. Zadní pohled 1 2 3 4 5 6 7 8 9 8 1.
Výchozí nastavení Datový tok DisplayPort v nabídce OSD je DisplayPort 1.2. Můžete to změnit na DisplayPort 1.1, pokud má vaše zařízení na výstupu signál DisplayPort 1.1. 6. USB 2.0 typ A. Tento port je pouze pro servis. 7. USB 3.0 typ C. Tento port slouží k propojení s kabelem USB pro příchozí signál. Připojení podporuje napájení i data přes USB. Tento monitor je kompatibilní s rozhraním Super-Speed USB 3.0 (5 Gb/s). Port nabízí max. 60W přenos napájení s výstupním napětím 5 V, 9 V, 12 V, 15 V a 20 V.
LCD monitor ASUS řady PA329C 1-5
1-6 Kapitola 1: Úvod k výrobku
2.1 Připevnění ramene/podstavce Montáž podstavce monitoru: 1. Položte monitor na stůl přední stranou dolů. (Obrázek 1) 2. Připevněte podstavec k rameni a ujistěte se, že kolík v rameni zapadne do otvoru v podstavci (Obrázek 2). 2 1 (Obrázek 2) (Obrázek 1) Doporučujeme přikrýt povrch stolu měkkou látkou, abyste zabránili poškození monitoru. 2.2 Sejmutí ramene/podstavce (pro montáž na zeď VESA) Odnímatelné rameno/podstavec tohoto monitoru je speciálně navrženo pro montáž na zeď VESA.
2.3 • Montážní sada na zeď VESA (100 x 100 mm) se prodává samostatně. • Používejte pouze držák pro montáž na stěnu uvedený v UL s minimální hmotností 22,7 kg (velikost šroubů: M4 x 10 mm). Nastavení monitoru • Pro optimální komfort při sledování doporučujeme dívat se na celou plochu monitoru a potom upravit úhel tak, jak je to pro vás nejpohodlnější. • Při změně úhlu přidržte podstavec, abyste zabránili pádu monitoru.
Otočení monitoru 1. Vysuňte monitor do nejvyšší polohy. 2. Nakloňte monitor v maximálním úhlu. 3. Otočte monitor v požadovaném úhlu. +20° ~ -5° Je běžné, že se monitor při nastavování úhlu pohledu nepatrně třese. 4. Nabídka OSD se automaticky otočí s monitorem.
2.4 Připojení kabelů Připojte kabely podle následujících pokynů: Pouze pro servis • Připojení napájecího kabelu: Jeden konec napájecího kabelu zapojte bezpečně do konektoru vstupu napájení, druhý konec do elektrické zásuvky. • Připojení kabelu HDMI/DisplayPort/USB typu C: a. Jeden konec kabelu HDMI/DisplayPort/USB typu C zapojte do konektoru HDMI/DisplayPort/USB typu C na monitoru. b. Druhý konec kabelu HDMI/DisplayPort/USB typu C zapojte do konektoru HDMI/DisplayPort/USB typu C na monitoru.
LCD monitor ASUS řady PA329C 2-5
2-6 Kapitola 2: Nastavování
3.1 Nabídka OSD (On-Screen Display) 3.1.1 Změna konfigurace ProArtPreset Standardní režim ASUS PA329C DisplayPort 3840 x 2160@ 60Hz Standardní režim Režim sRGB Režim Adobe RGB Režim DCI-P3 Režim DICOM Režim Rec. 709 HDR_PQ Rec2020 Uživatelský režim 1 Uživatelský režim 2 1. Pro aktivaci nabídky OSD stiskněte tlačítko Menu (5směrové). 2. Přesunutím tlačítka Menu (5směrové) nahoru/dolů/vlevo/vpravo můžete procházet funkcemi.
3.1.2 1. Úvod k funkci OSD ProArt Preset Tato funkce obsahuje 9 podfunkcí, které můžete zvolit podle preference. Pro aktivaci této funkce je postup následující: v zařízení zakažte HDR. ProArtPreset Standardní režim ASUS PA329C DisplayPort 3840 x 2160@ 60Hz Standardní režim Režim sRGB Režim Adobe RGB Režim DCI-P3 Režim DICOM Režim Rec. 709 HDR_PQ Rec2020 Uživatelský režim 1 Uživatelský režim 2 • Standardní režim: Nejlepší volba pro úpravu dokumentů.
Uživatelský Režim Standardní Režim Režim Režim Režim režim 1/ Adobe režim sRGB Rec.709 DCI-P3 DICOM Uživatelský sRGB režim 2 Funkce Teplota barev Jas Kontrast Ostrost Sytost Odstín Upřesňující nastavení Úroveň černé Gama Pevné 6500K 50 80 Aktivovat (0) Střední (50) Střední (50) Aktivovat Zakázat Aktivovat Aktivovat Aktivovat Zakázat Zakázat Aktivovat Zakázat Aktivovat Aktivovat Aktivovat Zakázat Zakázat Aktivovat (2,2) Kompenzace rovnoměrnosti 2.
Pro snížení únavy očí viz následující: 3. • Pokud uživatelé pracují u zobrazovacího zařízení dlouhou dobu, měli by si dát pauzu. Doporučujeme dělat krátké přestávky (nejméně 5 minut) přibližně po 1 hodině nepřetržité práce u počítače. Krátké a časté přestávky jsou efektivnější než jedna dlouhá pauza. • Pro minimalizování únavy očí a pocitu suchých očí by uživatelé měli pravidelně nechat oči odpočinout tak, že se zaměří na vzdálené předměty. • Ke snížení únavy očí mohou přispět cviky na oči.
• Úroveň černé: Pro úpravu inicializované 1. úrovně signálu nejtmavší úrovně šedé. • Upřesňující nastavení: • 4. * Nastavení 6 os odstínu. * Nastavení 6 os sytosti. * Nastavení úrovní zisku pro R, G, B. * Nastavení hodnot posunu úrovní černé pro R, G, B. Obnovit barvy: * Obnovit barvy aktuálního: Obnoví nastavení barev aktuálního barevného režimu na výchozí nastavení z výroby. * Obnovit barvy všech režimů: Obnoví nastavení barev všech barevných režimů na výchozí nastavení z výroby.
Pro aktivaci této funkce je postup následující: vypněte Dynamické stmívání a zakažte HDR na zařízení. • VividPixel: Vylepšuje obrysy zobrazovaného snímku a vytváří na obrazovce vysoce kvalitní snímky. Pro aktivaci této funkce je postup následující: v zařízení povolte Ostrost a zakažte HDR. 5. Zvuk V této nabídce provedete nastavení zvuku. Zvuk Standardní režim ASUS PA329C DisplayPort 3840 x 2160@ 60Hz Hlasitost Ztlumit Zdroj • Hlasitost: Rozsah nastavení je od 0 do 100.
• Zdroj PIP/PBP: Výběr zdroje vstupu videa z možností HDMI-1, HDMI-2, HDMI-3, DisplayPort a USB typ C. Tabulka níže obsahuje kombinace zdroje vstupu. Hlavní okno HDMI-1 HDMI-1 HDMI-2 HDMI-3 DisplayPort USB typ C Podokno Ano Ano Ano Ano HDMI-2 HDMI-3 DisplayPort USB typ C Ano Ano Ano Ano Ano Ano Ano Ano Ano Ano Ano Ano Ano Ano Ano Ano • Nastavení barev: Výběr individuálního režimu ProArt Preset pro vybraný zdroj PIP/PBP. (Lze vybrat až 2 režimy ProArt Preset.
• Ruler: Tento vzor představuje fyzické pravítko na horní a levé straně. Stisknutím tlačítka Menu (5směrové) déle než 3 sekundy můžete přepínat měrné jednotky mezi metrickými a imperiálními. 5 10 15 20 25 30 5 10 15 • Alignment: Umožňuje návrhářům a uživatelům uspořádat si obsah a rozvržení na stránce a dosáhnout konzistentního vzhledu a dojmu. Alignment Grid • A4: Můžete zobrazit dokumenty v reálné velikosti na obrazovce. A4 • B5: Můžete zobrazit dokumenty v reálné velikosti na obrazovce.
8. Výběr Vstupu V této funkci můžete vybrat požadovaný vstupní zdroj. Výběr vstupu Standardní režim ASUS PA329C DisplayPort 3840 x 2160@ 60Hz Standardní režim ASUS PA329C DisplayPort 3840 x 2160@ 60Hz HDMI-1 HDMI-2 HDMI-3 DisplayPort USB Type-C 9. Nastavení systému Umožňuje nastavovat systém. Nastavení systému ECO Mode Adaptive-Sync Dynamické stmívání Nastavení USB Úspora energie Nastavení OSD Jazyk • • ECO Mode: Snižuje spotřebu elektřiny.
Pro aktivaci této funkce je postup následující: vypněte PIP/PBP. • • • 3-10 Nastavení USB: Konfiguruje nastavení portu USB typu C. Parametr Nastavení USB má dopad na výstupní rozlišení, pouze když je zdroj připojený k portu USB typu C. Kvůli technologickým rozdílům mezi USB 2.0 a USB 3.0 se maximumální datová propustnost USB (šířka pásma a další související charakteristiky) liší a proto má vliv na maximální výstupní rozlišení. * USB 3.0: Rychlost přenosu dat podle specifikace 3.
Tato funkce je povolena, když je vybrán Uživatelský režim 1 nebo Uživatelský režim 2. • Datový tok DisplayPort: Kompatibilita s grafickou kartou. Vyberte DisplayPort 1.1 nebo DisplayPort 1.2 podle verze DP grafické karty. DisplayPort 1.1 je k dispozici, pouze když je Adaptive-Sync vyp. • Zámek kláves: K zakázání všech funkčních kláves. Pro zrušení funkce zámku kláves stiskněte asi na pět sekund druhé tlačítko shora. • Indikátor napájení: Vypíná/zapíná napájecí indikátor LED.
3.2 Přehled technických parametrů Typ panelu Velikost panelu Maximální rozlišení Rozteč pixelů Jas Kontrastní poměr (typ.) Kontrastní poměr (max.) Úhel sledování (H/V) CR > 10 Barvy zobrazení Barevný rozsah Teplota (provozní) TFT LCD 32,0" (16:9, 81,28 cm) široká obrazovka 3840 x 2160 0,1845 mm 400 cd/m2 (typ.) 600 cd/m2 (max.) 1000:1 100.000.000:1 (se zap. dynamickým stmíváním) 178˚/178˚ 1,07 miliard Adobe RGB 100%, sRGB 100%, DCI-P3 98%, Rec.
Kompatibilita a normy UL/cUL, CB, CE, ErP, FCC, ICES-3, CCC, CEL, BSMI, CU, RCM, VCCI, UkrSEPRO, J-MOSS, RoHS, WEEE, PSE, KCC, eStandby, KC, ISO 9241-307, TUV Flicker Free, TUV Low Blue Light, Windows 7, 8.1 a 10 WHQL, Mac Compliance*** *Technické parametry se mohou změnit bez předchozího upozornění. **Měření jasu obrazovky 200 nitů bez připojení zvuku/USB/čtečky karet. ***Vyžaduje Mac OS 10.10.x, 10.11.x, 10.12.x.
3.
3.3 Odstraňování potíží (Časté otázky) Problém Možné řešení Indikátor LED napájení není zapnut • Stiskněte tlačítko a zkontrolujte, zda je monitor v režimu ZAPNUTO. • Zkontrolujte, zda je napájecí kabel řádně zapojen do monitoru a elektrické zásuvky. • Zkontrolujte, zda je vypínač napájení ZAPNUTÝ. Indikátor napájení LED svítí žlutě a na • Zkontrolujte, zda je monitor a počítač v obrazovce není žádný obraz režimu ZAPNUTO. • Ujistěte se, že kabel signálu je správně zapojen do monitoru a počítače.
3.
Rozlišení 1920 × 1080p 1920 × 1080i 1440x480P 1440x576P 1280 × 720p 720 × 576p 720 × 480p 640 × 480p(VGA) 720(1440) × 576i 720(1440) × 480i Vertikální frekvence (Hz) 24 50 59,94 60 50 59,94 60 59,94 60 50 50 59,94 60 50 59,94 60 59,94 60 50 59,94 60 Horizontální frekvence (kHz) 27 56,25 67,43 67,5 28,13 33,72 33,75 31,47 31,5 31,25 37,5 44,95 45 31,25 31,47 31,5 31,47 31,5 15,63 15,73 15,75 * Režimy, které nejsou uvedeny v tabulce, nemusí být podporovány.
3-18 Kapitola 3: Nabídka OSD (On-Screen Display)