User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Attaching the arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
2-3ASUS PA329C Series LCD Monitor
4. The OSD menu item will automatically rotate when the monitor rotates.
Menu
Close
Input Select
HDR
Brightness
Blue Light Filter
Menu
Close
Input Select
HDR
Brightness
Blue Light Filter
2.4 Connecting the cables
Connect the cables as the following instructions:
For service only
: Connect one end of the power cord securely to
the monitor’s AC input port, the other end to a power outlet.
:
a. Plug one end of the HDMI/DisplayPort/USB Type-C cable to the
monitor’s HDMI/DisplayPort/USB Type-C jack.
b. Connect the other end of the HDMI/DisplayPort/USB Type-C cable to
your computer's HDMI/DisplayPort/USB Type-C jack.
connect the end with plug type to the monitor’s
earphone jack when an HDMI or DisplayPort signal is fed.