PA329C-sarjan LCD-näyttö Käyttöohje
Ensimmäinen painos Helmikuu 2019 Copyright © 2019 ASUSTeK COMPUTER INC. Kaikki oikeudet pidätetään. Tämän käyttöoppaan osia tai siinä kuvattuja tuotteita ja ohjelmistoja ei saa monistaa, siirtää, jäljentää, tallentaa hakujärjestelmään tai kääntää millekään kielelle missään muodossa tai millään tavalla, lukuun ottamatta dokumentaatiota, jonka ostaja on säilyttänyt varmistustarkoituksessa, ilman ASUSTeK COMPUTER INC:n (” ASUS”) erikseen myöntämää, kirjallista lupaa.
Sisältö Sisältö .......................................................................................................... iii Ilmoitus......................................................................................................... iv Turvallisuustiedot......................................................................................... v Huolto ja puhdistus..................................................................................... vi Takeback Services.................................
Ilmoitus Federal Communications Commissionin ilmoitus Tämä laite täyttää FCC-määräysten osan 15 vaatimukset. Laitteen käyttö on seuraavien ehtojen alaista: • Tämä laite ei saa aiheuttaa haitallisia häiriöitä ja • Tämän laitteen on siedettävä muualta tuleva häiriö, myös mahdollisesti asiaankuulumatonta toimintaa aiheuttavat häiriöt. Tämä laite on testattu, ja sen on osoitettu täyttävän FCC-määräysten osassa 15 luokan B digitaalilaitteille asetetut raja-arvot.
Turvallisuustiedot • Lue huolellisesti kaikki toimitukseen kuuluvat asiakirjat ennen näytön asettamista. • Estääksesi tulipalon tai sähköiskun vaaran älä koskaan altista näyttöä sateelle tai kosteudelle. • Älä koskaan yritä avata näytön koteloa. Näytön sisällä oleva vaarallisen korkea jännite voi johtaa vakavaan fyysiseen vammaan. • Jos virtalähde on rikkoutunut, älä yritä korjata sitä itse. Ota yhteys pätevään huoltoteknikkoon tai jälleenmyyjään.
Huolto ja puhdistus • Ennen kuin nostat tai sijoitat näytön uuteen paikkaan, on parempi irrottaa kaapelit ja virtajohto. Sijoita näyttö uuteen paikkaan oikealla nostotekniikalla. Kun nostat tai kannat näyttöä, pidä kiinni näytön reunoista. Älä nosta näyttöä sen telineestä tai johdosta. • Puhdistus. Sammuta näyttö pois päältä ja irrota virtajohto. Puhdista näytön pinta nukkaamattomalla, hankaamattomalla liinalla. Pinttyneet tahrat voi poistaa miedolla puhdistusaineliuoksella kostutetulla liinalla.
Mistä löydät lisätietoja Katso seuraavista lähteistä lisätietoja sekä tuote- ja ohjelmistopäivityksiä. 1. ASUS:n verkkosivut ASUS-yrityksen maailmanlaajuiset verkkosivustot tarjoavat päivitettyjä tietoja ASUS-laitteisto- ja -ohjelmistotuotteista. Katso: http://www.asus.com. 2. Valinnainen dokumentaatio Tuotteen pakkaus saattaa sisältää jälleenmyyjän lisäämiä valinnaisia asiakirjoja. Nämä asiakirjat eivät sisälly vakiopakkaukseen.
viii
1.1 Tervetuloa! Kiitos ASUS® LCD-näytön ostamisesta! ASUS:n uusin laajakuva-LCD-näyttö tarjoaa leveämmän, kirkkaamman ja kristallinkirkkaan näytön sekä runsaasti ominaisuuksia, jotka parantavat katselukokemustasi. Näillä ominaisuuksilla varustettuna pääset nauttimaan näytön tuomista ilahduttavista visuaalisista elämyksistä! 1.
1.3 Näytön esittely 1.3.1 Etunäkymä 1 2 3 4 5 6 7 Menu Close Input Select HDR Brightness Blue Light Filter 1. Valikon (5-suuntainen) painike: • Paina tätä painiketta siirtyäksesi OSD-valikkoon. • Ottaa käyttöön valittuja OSD-valikon kohteita. • Lisää/vähentää arvoja tai liikuuttaa valintaasi ylös/alas/vasemmalle/ oikealle. 2. Sulje-painike: • Poistuu OSD-valikosta. • Vaihtaa Key Lock (näppäimen lukitus) toimintoa päälle ja pois pitkällä painalluksella 5 sekunnin ajan.
• 6. Vaihda pikanäppäimen toimintoa menemällä Shortcut (Oikopolku) > Shortcut 1 (Oikopolku 1)-valikkoon. Oikopolku • Oletus: Blue Light Filter (Sinisen valon suodattimen) pikanäppäin • Vaihda pikanäppäimen toimintoa menemällä Shortcut (Oikopolku) > Shortcut 2 (Oikopolku 2)-valikkoon. 7. Virtapainike/virran merkkivalo • Kytkee näytön päälle/pois. • Virran merkkivalon värimääritelmä on alla olevan taulukon mukainen. 1.3.
DisplayPort Stream -oletusasetus OSD-valikossa on DisplayPort 1.2. Voit muuttaa sen DisplayPort 1.1:een, kun laitteesi lähtösignaali on DisplayPort 1.1. 6. USB 2.0 Type-A. Tämä portti on vain huoltoa varten. 7. USB 3.0 Type-C. Tämä portti on USB-alavirran kaapelin liittämistä varten. Yhteys tukee USB-virtaa ja tietojen siirtoa. Tämä näyttö on Super-Speed USB 3.0 yhteensopiva (5Gbps). Portti tarjoaa max. 60W tehontuoton lähtöjännitteellä 5V, 9V, 12V, 15V ja 20V.
ASUS PA329C-sarjan LCD-näyttö 1-5
1-6 Kappale 1: Tuotteen esittely
2.1 Varren/alustan kiinnitys Kokoan näytön alusta: 1. Laita näytön etuosa pöytää vasten. (Kuva 1) 2. Liitä alusta varteen ja varmista, että varren kieleke sopii alustan uraan (Kuva 2). 2 1 (Kuva 2) (Kuva 1) Suosittelemme, että peität pöydän pinnan pehmeällä kankaalla estääksesi näytön vahingoittumisen. 2.2 Varren/alustan irrotus (VESA-seinäkiinnikkeelle) Tämän näytön irrotettava varsi/alusta on suunniteltu varta vasten VESAseinäkiinnitykselle. Varren/alustan irrotus: 1.
2.3 • VESA-seinäkiinnityspaketti (100 x 100 mm) ostetaan erikseen. • Käytä vain UL Listed -seinäkiinnityskannattimia, joiden minimipaino/ kuorma on 22,7 kg (Ruuvikoko: M4 x 10 mm). Näytön säätäminen • Parhaaksi katselukulmaksi suositellaan näytön koko tasoa, säädä sitten näytön kulmaa haluamasi mukaan. • Pidä kiinni jalustasta näytön kulmaa säätäessäsi, ettei se putoa. • Voit säätää näytön kulmaa +20˚ - -5˚, ja se sallii 45˚ käännön joko vasemmalle tai oikealle.
Näytön kääntäminen 1. Nosta näyttöä korkeimpaan kohtaan. 2. Nosta näyttöä sen maksimikulmaan. 3. Käännä näyttöä haluamaasi kulmaan. +20° ~ -5° On normaalia, että näyttö tärisee hieman katselukulmaa säädettäessä. 4. OSD-valikon kohde kiertyy automaattisesti, kun näyttö kiertyy.
2.4 Kaapeleiden liittäminen Liitä kaapelit ohjeiden mukaisesti: Vain huoltoa varten • Yhdistä virtajohto: Liitä virtajohdon toinen pää näytön AC-tuloporttiin, toinen pää virtalähteeseen. • HDMI/DisplayPort/USB Type-C -kaapelin liittäminen: a. Kytke HDMI/DisplayPort/USB Type-C -kaapelin toinen pää näytön HDMI/DisplayPort/USB Type-C -liitäntään. b. Liitä HDMI/DisplayPort/USB Type-C -kaapelin toinen pää tietokoneesi HDMI/DisplayPort/USB Type-C -liitäntään.
ASUS PA329C-sarjan LCD-näyttö 2-5
2-6 Kappale 2: Asetukset
3.1 Kuvaruutu (OSD) -valikko 3.1.1 Uudelleenmääritys ProArtPreset ASUS PA329C Standard Mode DisplayPort 3840 x 2160@ 60Hz Standard Mode sRGB Mode Adobe RGB Mode DCI-P3 Mode DICOM Mode Rec. 709 Mode HDR_PQ Rec2020 User Mode 1 User Mode 2 1. Paina Valikko (5-suuntainen) -painiketta OSD-valikon aktivoimiseksi. 2. Siirrä Valikko (5-suuntainen) painiketta ylös/alas/vasemmalle/oikealla toimintojen läpi navigoimiseksi.
3.1.2 1. Kuvaruutuvalikon johdanto ProArt Preset Tämä toiminto sisältää 9 alitoimintoa, jotka voit valita haluamasi mukaan. Aktivoi tämä toiminto seuraavasti: ota HDR pois käytöstä laitteellasi. ProArtPreset ASUS PA329C Standard Mode DisplayPort 3840 x 2160@ 60Hz Standard Mode sRGB Mode Adobe RGB Mode DCI-P3 Mode DICOM Mode Rec. 709 Mode HDR_PQ Rec2020 User Mode 1 User Mode 2 • Standard Mode (Standarditila): Paras valinta asiakirjojen muokkaukseen.
Ota käyttöön seuraavat asetukset, kun teet ProArt -värikalibrointia: • Aseta lähdön dynamiikka täydelle asteikolle. • Aseta lähdön väriformaatti RGB:lle. • Aseta lähdön värin syvyys 8-bitille. Toiminto Värilämpötila Kirkkaus Kontrasti Terävyys Värikylläisyys Sävy Adobe DCI- DICOM- Käyttäjätila 1/ sRGB- Rec.
• Level 0 (Taso 0): Ei muutosta. • Level 1~4 (Taso 1~4): Mitä korkeampi taso, sitä vähemmän sinistä valoa siroaa. Kun Blue Light Filter (Sinisen valon suodatin) on aktivoitu, Standard Mode (Standarditila) -oletusasetukset tuodaan automaattisesti. Tason 1-3 välillä Brightness (Kirkkaus) -asetus on käyttäjän määritettävissä. Taso 4 on optimoitu asetus. Se on TUV:n sinisen valon sertifikaatin mukainen. Brightness (Kirkkaus) -toiminto ei ole käyttäjän määritettävissä.
• Saturation (Värikylläisyys): Säätöalue on 0-100. • Hue (Sävy): Siirtää kuvan väriä vihreän ja violetin välillä. • Color Temp. (Värilämpötila): Sisältää 5 tilaa mukaan lukien 9300K, 6500K, 5500K, 5000K ja P3-teatteri. P3-teatteri on saatavilla vain, kun DCI-P3-tila on valittu. • Gamma: Voit asettaa väritilaksi 2,6, 2,4, 2,2, 2,0 tai 1,8. • Black Level (Mustan taso): Säädä alustettu 1 signaalitaso tummimmalle harmaan tasolle. • Advanced Setting (Edistynyt asetus): • 4.
• • Aspect Control (Kuvasuhteen hallinta): Säätää kuvasuhteeksi Full (Täysi), 1:1, 4:3 tai OverScan. • Aktivoi tämä toiminto seuraavasti: sammuta PBP. • 4:3 on saatavilla vain silloin, kun tulolähde on 4:3-formaatissa. OverScan on saatavilla vain HDMI-tulolähteelle. Uniformity Compensation (Yhtenäisyyden kompensointi): Säätää ruudun eri alueita vähentääkseen ruudun yhtenäisyyden virheitä, tarjoten yhtenäisen kirkkauden ja värin koko ruudulla.
ASUS PA329C Standard Mode DisplayPort 3840 x 2160@ 60Hz PIP/PBP Setting PIP/PBP Mode PIP/PBP Source Color Setting PIP Size • PIP/PBP Mode (PIP/PBP-tila): Valitsee PIP, PBP-toiminnon tai sammuttaa sen. • PIP/PBP Source (PIP/PBP-lähde): Valitsee videon tulolähteeksi HDMI-1, HDMI-2, HDMI-3, DisplayPort ja USB Type-C. Alla oleva taulukko näyttää tulolähteen yhdistelmät. Pääikkuna HDMI-1 HDMI-1 HDMI-2 HDMI-3 DisplayPort USB Type-C Alaikkuna 7.
• Customization: Voit päättää kehyksen koon siirtämällä Valikko (5-suuntainen) -painiketta ylös/alas/vasemmalle/oikealle. Voit painaa Valikko (5-suuntainen) painiketta -painiketta pidempään kuin 3 sekuntia vaihtaaksesi mittoja millimetrien ja tuumien välillä. H16 V15 • Ruler: Tämä kuvio edustaa fyysistä viivoitinta yläpuolella ja vasemmalla. Voit painaa Valikko (5-suuntainen) painiketta -painiketta pidempään kuin 3 sekuntia vaihtaaksesi mittoja millimetrien ja tuumien välillä.
• B5: Voit katsella asiakirjoja todellisen kokoisina ruudulla. B5 8. Input Select (Tulon valinta) Tässä toiminnossa voit valita halutun tulolähteen. Input Select ASUS PA329C Standard Mode DisplayPort 3840 x 2160@ 60Hz HDMI-1 HDMI-2 HDMI-3 DisplayPort USB Type-C 9. System Setup (Järjestelmäasetukset) Voit tehdä muutoksia järjestelmään.
• Adaptive-Sync (Vain HDMI/DisplayPort): Mahdollistaa Adaptive-Sync tuettujen* grafiikkalähteen säätävän dynaamisesti virkistystaajuutta perustuen tyypilliseen sisällön kehysnopeuksiin tehokkaan, virtuaalisesti tärinättömän ja alhaisen latenssin näytön päivityksen. * Adaptive-Sync voidaan aktivoida vain 45Hz ~ 65Hz taajuudella. * Saat tiedot tuetuista GPU:ista, minimi PC-järjestelmästä ja ajurivaatimuksista ottamalla yhteyttä GPU-valmistajiin.
• OSD Setup (OSD-asetukset): * Säätää OSD-aikakatkaisua 10-120 sekuntia. * Ottaa DDC/CI-toiminnon käyttöön/pois käytöstä. * Säätää OSD-taustaa läpikuultamattomasta läpinäkyväksi. * Säätä OSD-kiertoa. • Language (Kieli): Valittavana on 21 kieltä, joihin kuuluu englanti, ranska, saksa, italia, espanja, hollanti, portugali, venäjä, tsekki, kroatia, puola, romania, unkari, turkki, yksinkertaistettu kiina, perinteinen kiina, japani, korea, thai, indonesia, persia.
10. Shortcut (Oikopolku) Määrittää toiminnot Oikopolku 1- ja 2 -painikkeille. Shortcut ASUS PA329C Standard Mode DisplayPort 3840 x 2160@ 60Hz Shortcut 1 Shortcut 2 • Shortcut 1 (Oikopolku 1)/Shortcut 2 (Oikopolku 2): Valitsee toiminnon Shortcut 1 (Oikopolku 1)/Shortcut 2 (Oikopolku 2) -painikkeille. Kun tietty toiminto valitaan tai aktivoidaan, pikanäppäintä ei välttämättä tueta.
3.2 Teknisten tietojen yhteenveto Paneelityyppi Paneelin koko Max.resoluutio Pikselien korkeus Kirkkaus Kontrastisuhde (tyyp.) Kontrastisuhde (max.) Lämpötila (käyttö) TFT LCD 32,0" (16:9, 81,28 cm) laajakuva 3840 x 2160 0,1845 mm 400 cd/m2 (tyyp.), 600 cd/m2 (max.) 1000:1 100.000.000:1 (dynaamisen himmennyksen ollessa päällä) 178˚/178˚ 1.07 miljardia Adobe RGB 100%, sRGB 100%, DCI-P3 98%, Rec.2020 84% 5 ms (harmaasta harmaaseen) 9 värin esiasetettua tilaa 5 värilämpötilaa HDMI v2.0b, DisplayPort v1.
Vaatimustenmukaisuus ja standardit UL/cUL, CB, CE, ErP, FCC, ICES-3, CCC, CEL, BSMI, CU, RCM, VCCI, UkrSEPRO, J-MOSS, RoHS, WEEE, PSE, KCC, eStandby, KC, ISO 9241-307, TUV Flicker Free, TUV Low Blue Light, Windows 7, 8.1 ja 10 WHQL, Mac Compliance*** *Kaikki tiedot voivat muuttua ilman erillistä ilmoitusta. **Mittaa ruudun kirkkautta 200 cd/m2 ilman ääni/USB/kortinlukija-liitäntää. ***Vaatii Mac OS:n 10.10.x, 10.11.x, 10.12.x.
3.
3.3 Vianetsintä (FAQ) Ongelma Virran LED-valo ei pala Virran LED palaa oranssina, eikä näytössä näy kuvaa Näytön kuva on liian vaalea tai tumma Näytön kuva hyppii tai kuvassa esiintyy aaltokuvioita Näytön kuvassa on värivirheitä (valkoinen ei näytä valkoiselta) Ei ääntä, tai äänen taso on liian matala 3-16 Mahdollinen ratkaisu • Paina -painiketta tarkistaaksesi, onko näyttö PÄÄLLÄ -tilassa. • Tarkista, onko virtajohto liitetty oikein näyttöön ja pistorasiaan. • Tarkista, onko virtapainike PÄÄLLÄ.
3.
Resoluutio 1920 × 1080p 1920 × 1080i 1440x480P 1440x576P 1280 × 720p 720 × 576p 720 × 480p 640 × 480p(VGA) 720(1440) × 576i 720(1440) × 480i Pystytaajuus (Hz) 24 50 59,94 60 50 59,94 60 59,94 60 50 50 59,94 60 50 59,94 60 59,94 60 50 59,94 60 Vaakataajuus (KHz) 27 56,25 67,43 67,5 28,13 33,72 33,75 31,47 31,5 31,25 37,5 44,95 45 31,25 31,47 31,5 31,47 31,5 15,63 15,73 15,75 * Taulukossa lueteltuja tiloja ei tueta.
ASUS PA329C-sarjan LCD-näyttö 3-19
3-20 Luku 3: Kuvaruutu (OSD) -valikko