Seria PA329CV Monitor LCD Ghidul utilizatorului
Cuprins Certificat TCO............................................................................................... iii Note............................................................................................................... iv Informaţii referitoare la siguranţă.............................................................. vi Îngrijire şi curăţare....................................................................................... x 1.1 Bine aţi venit!.......................................
Certificat TCO A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Note Declaraţia Comisiei federale de comunicaţii Acest dispozitiv respectă Secţiunea 15 a Regulilor FCC. Funcţionarea trebuie să îndeplinească următoarele două condiţii: • Acest dispozitiv nu poate cauza interferenţe nocive şi • Acest dispozitiv trebuie să accepte orice interferenţe primite, inclusiv interferenţele care pot provoca o funcţionare nedorită.
Dispozitivul poate să cadă, cauzând vătămări personale grave sau moarte. Pentru a preveni vătămările, acest dispozitiv trebuie să fie ataşat de podea/perete în concordanţă cu instrucţiunile de instalare.
Informaţii referitoare la siguranţă • • • • • • • • • • • • • • • • vi Înainte de configurarea monitorului, citiţi cu atenţie toată documentaţia care însoţeşte produsul. Pentru a preveni pericolul de incendiu sau de electrocutare, nu expuneţi monitorul la ploaie sau umiditate. Nu încercaţi să deschideţi carcasa monitorului. Tensiunile înalte periculoase din monitor pot provoca vătămarea corporală gravă. Dacă sursa de alimentare s-a stricat, nu încercaţi să o reparaţi singuri.
AVERTIZARE Utilizarea altor căşti decât cele specificate poate conduce la pierderea auzului ca urmare a presiunilor de sunet excesive. Vă rugăm confirmaţi ca sistemul de distribuţie în clădire oferă un întrerupător de circuit nominal de 120/240V, 20 A (maxim). Dacă se livrează cu o mufă cu 3 pini pe cablul de alimentare, conectaţi cablul la o priză cu 3 mufe (împământată). Nu dezactivaţi pinul de împământare al mufei, de exemplu prin ataşarea unui adaptor de 2 pini.
Presiunea excesivă de sunet din căşti poate cauza pierderea auzului. Ajustarea la maxim al egalizorului creşte voltajul de ieşire al căştilor, astfel creşte presiunea nivelului de sunet. 1. Nu aruncaţi dispozitivele electrice la gunoiul municipal nesortat, utilizaţi facilităţile de colectare separată. 2. Contactaţi autorităţile locale pentru informaţii referitoare la sisteme de colectare disponibile. 3.
Prevenirea răsturnării Atunci când este folosit afişajul, fixaţi LCD-ul de perete cu ajutorul unui cordon sau lanţ care poate suporta greutate monitorului pentru a preveni căderea monitorului. 1 Şurub M4 sau M6 Cordon 2 Cordon sau lanţ • Design-ul afişajului poate să difere de cele ilustrate. • Instalarea trebuie făcută de un tehnician calificat, pentru mai multe informaţii vă rugăm să contactaţi furnizorul dvs. • Pentru modele cu greutatea netă >=7kg.
Îngrijire şi curăţare • Înainte să ridicaţi sau să mutaţi monitorul, este bine să deconectaţi cablurile şi cablul de alimentare. Respectaţi tehnicile de ridicare corecte când poziţionaţi monitorul. Când ridicaţi sau transportaţi monitorul, ţineţi de marginile monitorului. Nu ridicaţi monitorul apucându-l de suport sau de cablu. • Curăţirea. Opriţi monitorul şi deconectaţi cablul de alimentare. Curăţaţi suprafaţa monitorului cu o cârpă fără scame, neabrazivă.
Unde găsiţi informaţii suplimentare Consultaţi următoarele surse pentru informaţii suplimentare şi pentru actualizări ale produsului şi software-ului. 1. Site-uri ASUS Site-urile ASUS internaţionale oferă informaţii actualizate despre produsele hardware şi software ASUS. Consultaţi http://www.asus.com 2. Documentaţie opţională Pachetul produsului dvs. poate include documentaţie opţională care poate fi adăugată de dealer. Aceste documente nu fac parte din pachetul standard.
1.1 Bine aţi venit! Vă mulţumim pentru achiziţionarea monitorului LCD ASUS®! Cel mai nou monitor LCD cu ecran panoramic de la ASUS oferă un afişaj cu contrast mai mare, mai lat şi mai luminos, plus o mulţime de caracteristici care îmbunătăţesc experienţa de vizualizare. Cu aceste caracteristici, vă puteţi bucura de confortul şi de experienţa vizuală încântătoare pe care o oferă monitorul! 1.
1.3 Asamblarea monitorului Pentru a asambla monitorul: 1. Intruduceţi suportul în capul monitorului, aliniaţi gaura şurubului de pe braţ cu şurubul inclus de pe bază. Apoi introduceţi baza în braţ. 2. Fixaţi baza de picior înşurubând şurubul inclus.
1.4 Asamblarea clemei C 1. Clema C ataşează monitorul la suprafeţe de până la 8 cm grosime. Înainte de a începe, asiguraţi-vă că aveţi suficient spaţiu pentru a fixa toată clema şi că suprafeţele sunt solide şi plate. 2. Urmaţi ilustraţiile de mai jos pentru a fixa monitorul.
Conectaţi cablurile 1.5.1 Partea posterioară a monitorului LCD 5V 1.5A 5V 1.5A 1.5 5V 20V 1 2 3 4 5 1. Port AC-IN 2. Întrerupător de alimentare: 3. Port HDMI1 4. Port HDMI2 5. Port de intrare DP 6. USB3.1 Type-C 7. Port ieşire căşti 8. USB3.1 Type A 9. USB3.1 Type A 0.9A 5V 11 10 0.9A 4.5A 6 7 8 9 10. USB3.1 Type A 11. USB3.1 Type A Acest monitor este compatibil Super-Speed USB 3.
1.6 Introducere monitor 1.6.1 Folosirea butoanelor de comandă Puteţi folosi butonul de comandă din partea inferioară a monitorului pentru a regla setările referitoare la imagine. Menu Închidere Strălucire Blue Light 7 6 5 4 3 2 1 Semnal Preset Alimentare 1. Buton Meniu (5 direcţii): • Apăsaţi acest buton pentru a intra în meniul OSD. • Activează elementul selectat din meniul OSD. • Creşte/Reduce valorile sau deplasează selecţia către sus/jos/stânga/ dreapta • Iese din meniul OSD. 2.
7. 1-6 Buton de alimentare/indicator alimentare • Porneşte/opreşte monitorul • Definiţia de culoare a indicatorului de alimentare se află în tabelul de mai jos.
2.1 Reglarea monitorului • Pentru vizualizare optimă, vă recomandăm să priviţi faţa completă a monitorului, apoi reglaţi monitorul la unghiul care este cel mai confortabil pentru dvs. • Ţineţi suportul pentru a preveni căderea monitorului în timpul modificării unghiului acestuia. • Puteţi regla unghiul monitorului de la +23˚ la -5˚ şi permite reglarea rotirii cu 30˚ fie de la stânga sau de la dreapta.
2.2 Detaşarea piciorului/suportului (pentru montarea pe perete VESA) Suportul detaşabil al acestui monitor este proiectat special pentru montarea pe perete VESA. Pentru a detaşa braţul/suportul 2-2 1. Deconectaţi cablurile de alimentare şi de semnal. Aşezaţi cu grijă monitorul cu faţa în jos, în ambalajul de EPS. 2. Apăsaţi butonul de eliberare rapidă de pe carcasa spate. 3. Detaşaţi suportul (piciorul şi baza) de pe monitor.
2.
3.1 Meniu OSD (On Screen Display - Afişare pe ecran) 3.1.1 Cum se reconfigurează ProArt PA329CV 3840 x 2160 60Hz Preset Mod standard Semnal DisplayPort Strălucire 50 Mod standard Preset Mod sRGB Mod Rec.
3.1.2 1. Introducere funcţie OSD ProArtPreset Această funcţie conţine doisprezece subfuncţii pe care le puteţi selecta după cum doriţi. ProArt PA329CV 3840 x 2160 60Hz Preset Mod standard Semnal DisplayPort Strălucire 50 Mod standard Preset Mod sRGB Mod Rec.
Mod randare rapidă poate fi activat doar la 60 Hz. Pentru a activa această funcţie trebuie să faceţi următoarele: opriţi Adaptive-Sync. Strălucire nu pot fi ajustate atunci când se foloseşte această funcţie. • Mod utilizator 1: Permite ajutarea culorilor în Setări avansate. • Mod utilizator 2: Permite ajutarea culorilor în Setări avansate. • Gama nu este configurabil de utilizator în modurile sRGB, DCI-P3, HDR, DICOM şi Mod peisaj.
2. Blue Light Reglaţi nivelul de energie al luminii albastre emise de retroiluminarea cu LED-uri. ProArt Preset Blue Light Palette PA329CV 3840 x 2160 60Hz Preset Mod standard Semnal DisplayPort Strălucire 50 Nivel 0 Nivel 1 Nivel 2 Nivel 3 Nivel 4 Imagine Sunet Back • Enter Exit Nivel 0: Nicio schimbare. • Când activaţi Filtru cu Lumină Albastră, setările implicite ale Mod standard vor fi importate automat.
3.
P3-Theater este disponibil doar când este selectat Mod DCI-P3. • Resetare culoare: * Resetare mod culoare curent: Reiniţializează setările de culoare ale modului de culoare curent la valoarea implicită din fabrică. * Resetare toate modurile culoare: Reiniţializează setările de culoare ale tuturor modurilor de culoare la valoarea implicită din fabrică. 4. Imagine Din această funcţie principală, puteţi să reglaţi următorii parametri ai imaginii: Claritate, Trace Free, Control aspect, Interval intrare .
5. Sunet Puteţi ajusta Volum, Mut şi Sursă de la această funcţie principală. ProArt PA329CV 3840 x 2160 Volum Preset Preset Mod standard 60Hz Semnal DisplayPort Strălucire 50 50 Mut Sursă Blue Light Palette Imagine Sunet Back 6. Enter Exit • Volum: Reglează nivelul volumului de ieşire. • Mut: Comutaţi funcţia de dezactivare a sunetului la PORNIT sau la OPRIT. • Sursă: decide ca sunetul monitorului din care sursă să vină.
• Sursa principală şi sursa secundară sunt disponibile conform următorului tabel. Sursă sub HDMI-1 Sursă principală HDMI-2 DisplayPort USB Type-C 7. HDMI-1 HDMI-2 DisplayPort USB Type-C NA NA OK OK NA NA OK OK OK OK NA NA OK OK NA NA QuickFit Plus Permite utilizatorilor să aibă o previzualizare a documentelor sau fotografiilor direct pe ecran fără să printeze copii de test.
9.
* USB 3.1: Rata de transfer de date în concordanţă cu specificaţiile 3.1 în portul USB Type-C duce doar două benzi pentru legătura principală. * USB 2.0: Rata de transfer de date în concordanţă cu specificaţiile 2.0 în portul USB Type-C poate duce doar patru benzi pentru legătura principală. 3-10 • Rata de transfer va rămâne USB 3.1 atunci când se foloseşte cablul USB Type-C - A. • Setărle de configurare USB nu afectează rezoluţia dacă sursa este conectată la DisplayPort sau port HDMI.
10. Scurtătură Selectarea acestei opţiuni vă permite să configuraţi două taste de comandă rapidă. Utilizatorii pot selecta Blue Light, Strălucire, Contrast, PIB/PBP, Culoare temperatură, Volum, Mod sRGB, Mod Rec. 709, Mod DICOM, Mod utilizator 1, Mod utilizator 2 şi se poate seta ca scurtătură.
3.2 Specificaţii Model PA329CV Dimensiune panou 32”L (81,28cm) Rezoluţie max. 3840 x 2160 la 60Hz Strălucire (tipic) 350cd/m2 Raport de contrast intrinsec (tipic) Unghi de vizualizare (CR=10) Culori afişaj Saturaţie de culoare 178° (V)/178° (H) 1,07 B 100% sRGB Timp de răspuns 5 ms (gri la gri) Boxă satelit 2W x 2 stereo Ieşire căşti Da Sunet de la HDMI Da Intrare HDMI Da Intrare DisplayPort Port USB Consum de energie în funcţionare (max.
3.3 Depanare (FAQ) Problemă LED-ul de alimentare nu este PORNIT Soluţie posibilă • Apăsaţi butonul pentru a verifica dacă monitorul este în modul PORNIT. • Verificaţi conectarea corectă a cablului de alimentare la monitor şi la priza electrică. • Consultaţi starea pentru funcţia Indicator alimentare din OSD-ul meniului principal. Selectaţi „PORNIT” pentru a activa LED-ul de alimentare.
3.