PA329CV sorozat LCD-monitor Útmutató
Tartalomjegyzék TCO-tanúsítvánnyal rendelkezik................................................................ iii Megjegyzések............................................................................................... iv Biztonsági információ................................................................................. vi Gondozás és tisztítás................................................................................... x 1.1 Üdvözöljük!..........................................................
TCO-tanúsítvánnyal rendelkezik A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Megjegyzések A Federal Communications Commission nyilatkozata Az eszköz megfelel az FCC-előírások 15. fejezetében meghatározott határértékeknek. A működtetésnek az alábbi két feltétele van: • • A készülék nem okozhat káros interferenciát, és Az eszköznek minden zavart el kell viselnie, ideértve az olyan interferenciát is, amely nem kívánt működést eredményezhet. Az elvégzett tesztek eredményei alapján kijelenthető, hogy a készülék az FCC szabályainak 15.
Az eszköz leeshet, és súlyos vagy halálos sérülést okozhat. A személyi sérülés elkerülése érdekében a készüléket szorosan a padlózathoz/falhoz kell rögzíteni, a telepítési utasításoknak megfelelően.
Biztonsági információ vi • Mielőtt üzembe helyezné a monitort, figyelmesen olvassa el a csomagban mellékelt dokumentációt. • A tűz és áramütés veszélyének elkerülése érdekében, soha ne tegyék ki a monitort eső vagy nedvesség hatásának. • Ne próbálja felnyitni a monitor burkolatát. A monitor belsejében uralkodó veszélyes nagyfeszültség súlyos testi sérülést okozhat. • Ha a tápegység elromlik, ne kísérelje meg saját maga megjavítani. Forduljon szakemberhez vagy a termék viszonteladójához.
FIGYELEM A megadott fej- vagy fülhallgatótól eltérő típus használata maradandó halláskárosodást okozhat a túlzott hangnyomás miatt. Kérjük, erősítse meg, hogy az épületen belüli elosztórendszer megszakítója megfelelő 120 V/240 V, 20 A (maximum) áramhoz. Ha a tápkábel 3 érintkezős csatlakozóval rendelkezik, akkor a kábelt egy földelt, 3 érintkezős aljzatba csatlakoztassa. Ne iktassa ki a tápkábel földelő érintkezőjét, például egy 2 érintkezős adapter csatlakoztatásával.
A fülhallgatókból és fejhallgatókból származó túlzott hangnyomás halláskárosodást okozhat. A hangszín-szabályozó maximumra állítása megnöveli a fülhallgatók és fejhallgatók kimeneti feszültségét, és ezzel a hangnyomásszintet is. 1. Az elektromos készülékeket nem szabad szelektálatlan települési hulladékként kidobni. Használja az elkülönített gyűjtőhelyeket. 2. Az elérhető gyűjtőrendszerekről tájékozódjon a helyi önkormányzatnál. 3.
Eldőlés megelőzése A megjelenítő használata során rögzítse az LCD-t a falhoz egy zsinór vagy lánc segítségével, amely elbírja a monitor súlyát, hogy megelőzhesse a monitor leesését. 1 M4 vagy M6 csavar Zsinór 2 Zsinór vagy lánc • A megjelenítő megjelenése eltérhet az ábrán láthatótól. • A telepítést szakembernek tanácsos végezni, ezért kérjük, lépjen kapcsolatba a forgalmazóval bővebb tájékoztatásért. • A >=7 kg nettó tömegű típusok esetében. Válasszon módot az eldőlés megelőzéséhez.
Gondozás és tisztítás • Mielőtt felemelné vagy áthelyezné a monitort, tanácsos leválasztani róla a tápkábelt és a jelkábeleket. Alkalmazza a megfelelő emelési technikát a monitor elhelyezésénél. A monitor emelése vagy hordozása alkalmával mindig a szélénél fogja meg. Ne emelje meg a kijelzőt a talpánál vagy a tápkábelnél fogva. • Tisztítás. Kapcsolja ki a monitort és húzza ki a hálózati tápkábelt. A monitort nem szöszölő, puha kendővel tisztítsa.
Hol tájékozódhatom részletesebben További információkért, illetve termék- vagy szoftverfrissítésekért vegye igénybe az alábbi forrásokat. 1. ASUS weboldalak Az ASUS nemzetközi weboldalai a legfrissebb információkat közlik az ASUS hardver- és szoftvertermékeivel kapcsolatban. Látogassa meg a http://www.asus.com weboldalt. 2. Opcionális dokumentáció A termék csomagja opcionális dokumentációt is tartalmazhat, amelyet a kereskedő biztosított. Ezek a dokumentumok nem részei a szabvány csomagnak.
1.1 Üdvözöljük! Köszönjük, hogy ASUS® LCD-monitort választott! Az ASUS legújabb szélesképernyős LCD monitorja élesebb, szélesebb és világosabb képet biztosít, valamint számos szolgáltatást, amelyek fokozzák élményét. A szolgáltatások élvezetessé és praktikussá teszik a monitor nyújtotta vizuális élményt! 1.
1.3 A monitor összeszerelése A monitor összeszereléséhez: 1. Illessze az állványt a monitorfejbe. Hozza egy vonalba a karon lévő csavarnyílást a talpon lévő tartozékcsavarral. Ezután helyezze be a talpat a karba. 2. Rögzítse a talpat a karhoz a tartozékcsavar meghúzásával. *Talpcsavar mérete: M6 x 17 mm 1-2 1.
1.4 A C-bilincs összeszerelése 1. A C-bilincs segítségével a monitort akár 8 cm vastagságú felületekhez erősítheti. Mielőtt hozzáfogna, győződjön meg arról, hogy van elegendő szabad hely a teljes bilincs fogadására, és hogy a felület stabil és sík. 2. Kövesse az Illusztrációkat a monitor felszereléséhez.
A kábelek csatlakoztatása 1.5.1 Az LCD-monitor hátulnézete 5V 1.5A 5V 1.5A 1.5 5V 20V 1 2 3 4 5 0.9A 5V 11 10 0.9A 4.5A 6 7 8 9 1. AC tápcsatlakozó 2. Főkapcsoló 3. HDMI1 Port 4. HDMI2 Port 5. DP - bemeneti port 6. USB3.1 Type-C 7. Fülhallgató-kimeneti csatlakozó 8. USB3.1 Type-A 9. USB3.1 Type-A 10. USB3.1 Type-A 11. USB3.1 Type-A Ez a monitor Super-Speed USB 3.1-kompatibilis (5 Gbps).
1.6 A monitor bemutatása 1.6.1 A vezérlőgomb használata Használja a monitor alján lévő vezérlőgombot a képbeállítások elvégzéséhez. Menu Bezárás Fényerő Kékfény 7 6 5 4 3 2 1 Jel Preset Tápellátás 1. Menügomb (5 irányú): • Nyomja meg a gombot az OSD menü aktiválásához. • Aktiválja a kijelölt OSD menütételeket. • Növeli/Csökkenti az értékeket, vagy fel/le/balra/jobbra mozgatja a kiválasztott sort. 2. • 3.
7. 1-6 Főkapcsoló gomb és működésjelző fény: • Be- és kikapcsolja a monitort. • Az alábbi táblázat tartalmazza a bekapcsolt állapotot jelző fény színeinek meghatározását. Állapot Leírás Fehér BE Sárga Készenléti mód KI KI 2.
2.1 A monitor beállítása • Az optimális nézőszög beállításához tanácsos szemből néznie a monitort, majd a lehető legkényelmesebb állásra beállítania a monitor szögét. • Fogja meg a talpat, nehogy leessen a monitor, amikor beállítja a szögét. • A monitor nézőszögét +23 és -5 fok között állíthatja, illetve lehetővé teheti a balra vagy jobbra történő elforgatását 30 fokos szögben.
2.2 A kar/állvány leszerelése (VESA fali konzolhoz) A monitor leszerelhető karját/talpát külön VESA fali konzollal való használatra tervezték. A kar/talp leszerelése 2-2 1. Válassza le a táp- és jelkábeleket. Tegye a monitort óvatosan fejjel lefelé az EPS-csomagolásra. 2. Nyomja meg a gyorskioldó gombot a hátsó fedélen. 3. Vegye le az állványt (a kart és a talpat) a monitorról. • A VESA fail konzolkészlet (100 x 100 mm) külön megvásárolható.
2.
3.1 OSD (képernyőn megjelenő) menü 3.1.1 Útmutató a beállításhoz ProArt PA329CV 3840 x 2160 Preset Normál mód 60Hz Jel DisplayPort Fényerő 50 Normál mód Preset sRGB mód Rec.
3.1.2 1. OSD funkciók leírása ProArtPreset Ez a funkció 12 alfunkciót tartalmaz, amelyeket tetszés szerint kiválaszthat. ProArt PA329CV 3840 x 2160 Preset Normál mód 60Hz Jel DisplayPort Fényerő 50 Normál mód Preset sRGB mód Rec.
A Rapid Rendering Mode csak 60 Hz-en aktiválható. A funkció aktiválásához tegye a következőket: kapcsolja ki az Adaptive-Sync funkciót. E funkció használata közben a Fényerő nem állítható. • Felhasználói mód 1: Színbeállítások végzését teszi lehetővé a Speciális beállítások alatt. • Felhasználói mód 2: Színbeállítások végzését teszi lehetővé a Speciális beállítások alatt. • A Gamma nem felhasználó által konfigurálható sRGB, DCI-P3, HDR, DICOM és tájkép módban. • A Színhőmérs.
2. Kékfény Az LED háttérvilágítás által kibocsátott kékfény energiaszintjének beállítása. ProArt Preset Kékfény Palette PA329CV 3840 x 2160 60Hz Preset Normál mód Jel DisplayPort Fényerő 50 0. szint 1. szint 2. szint 3. szint 4. szint Kép Hang Back • Enter Exit 0. szint: Nincs módosítás. • A Kék fényszűrő aktiválásakor a Normál mód alapértelmezett beállításai automatikusan importálásra kerülnek. • Az 1. szint és 3. szint között a Fényerő funkció a felhasználó által beállítható. • A 4.
3. Paletta ProArt Preset Kékfény PA329CV 3840 x 2160 Preset Normál mód 60Hz Fényerő 50 Kontraszt 80 Telítettség 50 Színezet 50 Jel DisplayPort Fényerő 50 Színhőmérs.
A P3-Theater csak kiválasztott DCI-P3 mód esetén elérhető. • Színek visszaállítása: * Jelenlegi mód színei alaphelyzetbe: az aktuális szín üzemmód színbeállításait a gyári alapértékekre állítja vissza. * Minden mód színei alaphelyzetbe: az összes szín üzemmód színbeállításait a gyári alapértékekre állítja vissza. 4. Kép Az Élesség, Utánhúzás-mentesség, Képarány-beállítás, Bemeneti tartomány ebből a főmenüből állítható be.
5. Hang A Hangerő, Némítás és Forrás beállítására van lehetőség ebben a főfunkcióban. ProArt PA329CV 3840 x 2160 Hangerő Preset Preset Normál mód 60Hz Jel DisplayPort Fényerő 50 50 Némítás Forrás Kékfény Palette Kép Hang Back 6. Exit Enter • Hangerő: Beállítja a kimeneti hangerőt. • Némítás: A hang némítását BE vagy KI értékre állítja. • Forrás: eldönti, mely forrásból érkezzen a monitor hangja.
• Az elsődleges és a másodlegos forrás az alábbi táblázat szerint elérhető. Másodlagos forrás HDMI-1 Elsődleges forrás HDMI-2 DisplayPort USB Type-C 7. HDMI-1 HDMI-2 DisplayPort USB Type-C NA NA OK OK NA NA OK OK OK OK NA NA OK OK NA NA QuickFit Plus A dokumentum vagy fotó-elrendezés előnézete próbanyomat készítése nélkül látható a képernyőn.
9.
* USB 3.1: A 3.1-es specifikáció szerinti adatátviteli sebesség USB Type-C aljzatnál csak két sáv használatát teszi lehetővé az elsődleges kapcsolat esetén. * USB 2.0: A 2.0-s specifikáció szerinti adatátviteli sebesség USB Type-C aljzatnál csak négy sáv használatát teszi lehetővé az elsődleges kapcsolat esetén. 3-10 • Az adatátviteli sebesség USB 3.1 marad, ha USB „C”-„A” átalakítókábelt használnak.
10. Parancs Ennek az opciónak a kiválasztása két gyorsgomb beállítását teszi lehetővé. A felhasználók a következők közül választhatnak: Kékfény, Fényerő, Kontraszt, PIP/PBP, Színhőmérs., Hangerő, sRGB mód, Rec. 709 mód, DICOM mód, Felhasználói mód 1, Felhasználói mód 2 és azt beállíthatják gyorsgombként.
3.2 Műszaki adatok Típus 32” Sz (81,28cm) Max. felbontás 3840x2160, 60Hz Fényerő (jellemző) Valódi kontrasztarány (jellemző) Látószög (CR=10) 350 cd/m2 1000:1 178°(F) /178°(V) Megjeleníthető színek száma 1,07 milliárd Színtelítettség 100% sRGB Válaszidő Szatellit hangszóró 5 ms (Szürkétől szürkéig) 2W x 2 sztereó Fülhallgató csatlakozó Igen HDMI hang Igen HDMI bemenet Igen DisplayPort bemenet USB-aljzat Bekapcsolt állapot melletti áramfogyasztás (Max.
3.3 Hibaelhárítás (GYIK) Probléma A bekapcsolt állapotot jelző LED NEM világít Lehetséges megoldás • Nyomja meg a gombot, hogy meggyőződjön, bekapcsolt állapotban van a monitor. • Ellenőrizze, hogy megfelelően csatlakozik-e a hálózati tápkábel a monitorhoz, illetve a konnektorhoz. • A Működésjelző funkció ellenőrzése az OSD főmenüben. Válassza az „Be” lehetőséget a bekapcsolt állapotot jelző LED bekapcsolásához.
3.