Seria PA329CV Monitor LCD Podręcznik użytkownika
Spis treści TCO Certified................................................................................................ iii Uwagi............................................................................................................ iv Informacje związane z bezpieczeństwem.................................................. vi Dbanie i czyszczenie.................................................................................... x 1.1 Witamy!...........................................................
TCO Certified A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Uwagi Oświadczenie Federalnej Komisji Łączności Urządzenie to jest zgodne z Częścią 15 przepisów FCC. Jego działanie wymaga spełnienia następujących dwóch warunków: • Urządzenie to nie może powodować żadnych szkodliwych zakłóceń i • Urządzenie to musi akceptować wszelkie odbierane zakłócenia, włącznie z zakłóceniami nieprzewidywalnymi. Urządzenie to zostało poddane testom, które określiły, że spełnia ograniczenia dla urządzeń cyfrowych klasy B, określone przez część 15 przepisów FCC.
Oświadczenie Kanadyjski Departament Komunikacji To urządzenie cyfrowe nie przekracza ograniczeń klasy B dla emisji zakłóceń radiowych, ustalonych przez Przepisy dotyczące zakłóceń radiowych Kanadyjskiego Departamentu Komunikacji. To urządzenie cyfrowe klasy B jest zgodne z kanadyjską normą ICES-003. Urządzenie może upaść, powodując poważne obrażenia osobiste lub śmierć. Aby zapobiec obrażeniom, to urządzenie należy bezpiecznie przymocować do podłogi/ściany, zgodnie ze wszystkimi instrukcjami instalacji.
Informacje związane z bezpieczeństwem • • • • • • • • • • • • • • • • vi Przed wykonaniem ustawień monitora należy uważnie przeczytać całą, dostarczoną w opakowaniu dokumentację. Aby zapobiec pożarowi lub porażeniu prądem elektrycznym, nigdy nie należy narażać monitora na działanie deszczu lub wilgoci. Nigdy nie należy otwierać obudowy monitora. Niebezpieczne, wysokie napięcie wewnątrz monitora może spowodować poważne obrażenia fizyczne.
OSTRZEŻENIE Korzystanie ze słuchawek nausznych i dousznych innych niż określone w niniejszym dokumencie może być przyczyną utraty słuchu spowodowanej nadmiernym ciśnieniem akustycznym. Należy potwierdzić, że system dystrybucji w instalacji budynku powinien dostarczyć wyłącznik obwodu o parametrach znamionowych 120/240V, 20A (maksymalnie). Po dostarczeniu z 3-bolcową wtyczką na przewodzie zasilającym, podłącz przewód zasilający do uziemionego gniazda na 3-bolce.
NIGDY nie należy umieszczać na produkcie lub na meblu na którym ustawiony jest produkt elementów, które mogą kusić dzieci do wspinania, takich jak zabawki i piloty. Jeśli istniejący produkt ma zostać zatrzymany i ma zostać zmienione jego miejsce, należy się zastosować do wymienionych powyżej zaleceń. Nadmierne ciśnienie akustyczne ze słuchawek dousznych i słuchawek nagłownych, może spowodować utratę słuchu.
Zabezpieczenie przed przewróceniem Podczas używania wyświetlacza, aby zabezpieczyć monitor przed upadkiem należy przymocować LCD do ściany z wykorzystaniem linki lub łańcucha, wystarczająco mocnego do utrzymania ciężaru monitora. 1 Śruba M4 lub M6 Linka 2 Linka lub łańcuch • • • • Konstrukcja wyświetlacza może się różnić od pokazanej na ilustracji. Instalację musi zostać wykonana przez wykwalifikowanego technika, a w celu uzyskania dodatkowych informacji należy się skontaktować ze swoim dostawcą.
Dbanie i czyszczenie • Przed zmianą pozycji monitora zaleca się odłączenie kabli i przewodu zasilającego. Podczas zmiany pozycji monitora należy stosować właściwe techniki podnoszenia. Podczas podnoszenia lub przenoszenia należy chwycić za krawędzie monitora. Nie należy podnosić monitora za podstawę lub za przewód. • Czyszczenie. Wyłącz monitor i odłącz przewód zasilający. Oczyść powierzchnię monitora pozbawioną luźnych włókien, nie szorstką szmatką.
Gdzie można znaleźć więcej informacji W celu uzyskania dodatkowych informacji i aktualizacji produktu i oprogramowania, sprawdź następujące źródła. 1. Strony sieci web ASUS Ogólnoświatowe strony sieci web ASUS zapewniają zaktualizowane informacje o urządzeniach i oprogramowaniu firmy ASUS. Sprawdź http://www.asus.com 2. Opcjonalna dokumentacja Opakowanie z produktem może zawierać opcjonalną dokumentację, która mogła zostać dodana przez dostawcę. Te dokumenty nie są części standardowego opakowania.
1.1 Witamy! Dziękujemy za zakupienie monitora LCD ASUS®! Najnowszy szerokoekranowy monitor LCD ASUS zapewnia wyraźny, szerszy i jasny wyświetlacz, plus funkcje zwiększające doznania podczas oglądania. Dzięki tym funkcjom, można cieszyć się wygodnymi i wspaniałymi obrazami, jakie zapewnia monitor! 1.
1.3 Podłączanie monitora W celu podłączenia monitora: 1. Włóż wspornik do głowicy monitora. Wyrównaj otwór na śrubę na ramieniu ze śrubą w podstawie. Następnie wsuń podstawę do wspornika. 2. Przymocuj podstawę do wspornika, dokręcając dołączoną śrubę.
1.4 Montaż zacisku C 1. Zacisk C łączy monitor z powierzchniami o grubości do 8 cm, Przed rozpoczęciem, upewnij się, że jest wystarczająco dużo miejsca na dopasowanie całego zacisku oraz, że powierzchnie są mocne i płaskie. 2. Wykonaj montaż monitora, zgodnie z ilustracjami poniżej.
Połączenia kabli 1.5.1 Tył monitora LCD 5V 1.5A 5V 1.5A 1.5 5V 20V 1 2 3 4 5 1. Port wejścia prądu zmiennego 2. Przełącznik zasilania 3. Gniazdo HDMI1 4. Gniazdo HDMI2 5. Gniazdo wejścia DP 6. USB 3.2 Gen 1 Type-C 7. Port wyjścia słuchawek 8. USB 3.2 Gen 1 Type A 9. USB 3.2 Gen 1 Type A 0.9A 5V 11 10 0.9A 4.5A 6 7 8 9 10. USB 3.2 Gen 1 Type A 11. USB 3.2 Gen 1 Type A Ten monitor jest zgodny ze standardem Super-Speed USB 3.2 Gen 1 (5 Gbps). Port oferuje maks.
1.6 Wprowadzenie do monitora 1.6.1 Używanie przycisku sterowania Za pomocą przycisku sterowania na spodzie monitora można dostosować ustawienia obrazu. Menu Zamknij Jasność Św. Nieb. 7 6 5 4 3 2 1 Sygnał Preset Zasilanie 1. Przycisk Menu (5-kierunkowy): • Naciśnij ten przycisk, aby przejść do menu OSD. • Uruchamianie wybranych elementów OSD. • Zmniejszanie/zwiększanie wartości lub przesuwanie wyboru w górę/w dół/w lewo/w prawo. • Opuszczanie menu OSD. 2. Przycisk Zamknij: 3.
7. 1-6 Przycisk zasilania/wskaźnik zasilania: • Włączanie/wyłączanie monitora. • Definicje kolorów wskaźnika zasilania zawiera tabela poniżej. Stan Opis Biały WŁ. Bursztynowy Tryb gotowości WYŁ. WYŁ.
2.1 Regulacja monitora • Dla uzyskania optymalnego widzenia, zaleca się, aby spojrzeć na pełny ekran monitora, a następnie wyregulować monitor pod najbardziej wygodnym kątem. • Przytrzymaj podstawę, aby zabezpieczyć monitor przed upadkiem podczas zmiany jego kąta nachylenia. • Kąt nachylenia monitora można regulować w zakresie od +23˚ do -5˚, monitor można też przekręcać w lewo lub w prawo o 30˚.
2.2 Odłączanie wspornika/podstawy (do montażu ściennego VESA) Odłączana podstawa tego monitora, jest przeznaczona do montażu na ścianie VESA. W celu odłączenia wspornika/podstawy 2-2 1. Odłącz kable zasilania i sygnałowy. Umieść ostrożnie monitor skierowany ekranem w dół w opakowaniu EPS. 2. Naciśnij przycisk szybkiego zwalniania na pokrywie tylnej. 3. Odłącz podstawę (wspornik z podstawą) od monitora. • Zestaw do montażu ściennego VESA (100 x 100 mm) należy zakupić oddzielnie.
2.
3.1 Menu OSD (menu ekranowe) 3.1.1 Jak wykonać ponowną konfigurację ProArt PA329CV 3840 x 2160 60Hz Preset Tryb Standardowy Sygnał DisplayPort Jasność 50 Tryb Standardowy Preset Tryb sRGB Tryb Rec. 709 Św. Nieb. Tryb DCI-P3 HDR Palette Tryb DICOM Tryb Sceneria Obraz Tryb Odczytu Dźwięk Back ProArt Preset Św. Nieb. PA329CV 3840 x 2160 60Hz Preset Tryb Standardowy Tryb szybk. render. WYŁ.
3.1.2 1. Wprowadzenie do funkcji OSD ProArtPreset Ta funkcja obejmuje dwanaście podfunkcji, które można wybrać według preferencji. ProArt PA329CV 3840 x 2160 60Hz Preset Tryb Standardowy Sygnał DisplayPort Jasność 50 Tryb Standardowy Preset Tryb sRGB Tryb Rec. 709 Św. Nieb. Tryb DCI-P3 HDR Palette Tryb DICOM Tryb Sceneria Obraz Tryb Odczytu Dźwięk Back ProArt Preset Św. Nieb. PA329CV 3840 x 2160 60Hz Preset Tryb Standardowy Tryb szybk. render. WYŁ.
Tryb szybk. render. można uaktywnić wyłącznie przy 60Hz. Aby uaktywnić tę funkcję, należy wykonać następującą czynność: wyłącz Adaptive-Sync. Podczas używania tej funkcji, nie można regulować ustawień Jasność . • Tryb Użytkownik 1: Umożliwia dostosowanie kolorów w opcji Ustawienia Zaawansowane. • Tryb Użytkownik 2: Umożliwia dostosowanie kolorów w opcji Ustawienia Zaawansowane. • Gamma nie jest konfigurowane przez użytkownika w trybie sRGB, DCI-P3, HDR, DICOM i w tryb sceneria. • Temp.
2. Św. Nieb. Dostosowywanie poziomu energii światła niebieskiego emitowanego przez podświetlenie LED. ProArt Preset Św. Nieb. Palette PA329CV 3840 x 2160 60Hz Preset Tryb Standardowy Sygnał DisplayPort Jasność 50 Poziom 0 Poziom 1 Poziom 2 Poziom 3 Poziom 4 Obraz Dźwięk Back • Enter Exit Poziom 0: Bez zmian • Gdy ustawienie Filtr światła nieb. zostanie uaktywnione, automatycznie zaimportowane zostaną ustawienia domyślne pozycji Tryb Standardowy.
3. Palette ProArt Preset Św. Nieb. PA329CV 3840 x 2160 Preset Tryb Standardowy 60Hz Jasność 50 Kontrast 80 Nasycenie 50 Barwa 50 Sygnał DisplayPort Jasność 50 Temp. barwowa Palette Gamma Obraz Kolor Poziom czerni Dźwięk Enter Back ProArt Preset PA329CV 3840 x 2160 60Hz Zerowanie kolorów Św. Nieb. Preset Tryb Standardowy Sygnał DisplayPort Exit Jasność 50 Zerow. bieżącego trybu koloru Zerow. wszyst.
Tryb P3-Theater jest dostępny wyłącznie po wybraniu Tryb DCI-P3. • Zerowanie kolorów: * Zerow. bieżącego trybu koloru: Zerowanie ustawień koloru bieżącego trybu koloru do domyślnych wartości fabrycznych. * Zerow. wszyst. trybów koloru: Zerowanie ustawień koloru wszystkich trybów koloru do domyślnych wartości fabrycznych. 4. Obraz Z tej głównej funkcji można dostosować Ostrość, Trace Free, Kontrola proporcji, Zakres wprowadzania oraz .
5. Dźwięk Z tej głównej funkcji można dostosować Głośność, Wyciszenie i Źródło. ProArt PA329CV 3840 x 2160 Głośność Preset Preset Tryb Standardowy 60Hz Sygnał DisplayPort Jasność 50 50 Wyciszenie Źródło Św. Nieb. Palette Obraz Dźwięk 6. Exit Enter Back • Głośność: Regulacja poziomu głośności wyjścia. • Wyciszenie: Wybór WŁ. lub WYŁ. wyciszenia dźwięku. • Źródło: decyduje o źródle pochodzenia dźwięku monitora.
• Główne źródło i źródło dodatkowe są dostępne, jak w następującej tabeli. Dodatkowe źródło Główne źródło 7. HDMI-1 HDMI-2 DisplayPort USB Type-C HDMI-1 HDMI-2 DisplayPort USB Type-C Nie dotyczy Nie dotyczy OK OK Nie dotyczy Nie dotyczy OK OK OK OK Nie dotyczy Nie dotyczy OK OK Nie dotyczy Nie dotyczy QuickFit Plus Umożliwia użytkownikom uzyskanie podglądu układu dokumentu lub zdjęcia bezpośrednio na ekranie, bez konieczności wykonywania wydruków próbnych.
9. Settings (Ustawienia) ProArt PA329CV 3840 x 2160 60Hz Preset Tryb Standardowy Sygnał DisplayPort Jasność 50 Adaptive-Sync PIP/PBP Ustawienia USB Poziom Zasilania QuickFit Plus Ustawienia OSD Strumień DisplayPort Sygnał Blokada klawiszy Wskaźnik zasilania Ustawien. Informacje Skrót ProArt PIP/PBP Back PA329CV 3840 x 2160 60Hz Preset Tryb Standardowy Język TAK Wyzeruj wszystko NIE Enter Sygnał DisplayPort Exit Jasność 50 QuickFit Plus Sygnał Ustawien.
* USB 3.2 Gen 1: Szybkość transferu danych, zgodnie ze specyfikacją 3.2 Gen 1 portu USB Type C, umożliwia obsługę dla Głównego łącza, jedynie dwóch torów. * USB 2.0: Szybkość transferu danych, zgodnie ze specyfikacją 2.0 portu USB Type C, umożliwia obsługę dla Głównego łącza, jedynie czterech torów. 3-10 • Podczas używania kabla USB Type C do A, szybkość transferu danych jest ograniczona do szybkości USB 3.2 Gen 1.
10. Skrót Wybór tej opcji, umożliwia ustawienie dwóch przycisków skrótu. Użytkownik może wybrać spośród Św. Nieb., Jasność, Kontrast, PIP/ PBP, Temp. barwowa, Głośność, Tryb sRGB, Tryb Rec. 709, Tryb DICOM, Tryb Użytkownik 1, Tryb Użytkownik 2 i ustawić jako przycisk skrótu. ProArt PA329CV 3840 x 2160 60Hz Preset Tryb Standardowy Sygnał DisplayPort Jasność 50 Skrót 1 PIP/PBP Skrót 2 QuickFit Plus Sygnał Ustawien.
3.2 Specyfikacje Model PA329CV Wielkość panelu S 32” (81,28cm) Maks.
3.3 Rozwiązywanie problemów (FAQ) Problem Możliwe rozwiązanie WŁĄCZONA dioda LED zasilania • Naciśnij przycisk , aby sprawdzić, czy monitor znajduje się w trybie ON (WŁĄCZENIE). • Sprawdź, czy przewód zasilający jest prawidłowo podłączony do monitora i do gniazda zasilania. • Sprawdź funkcję Wskaźnik zasilania w głównym menu OSD. Wybierz „WŁ.” w celu włączenia diody LED zasilania. Pomarańczowe światło diody LED zasilania i brak obrazu na ekranie • Sprawdź, czy monitor i komputer są w trybie WŁĄCZENIE.
3.