Monitor LCD Seria PA32U Ghidul utilizatorului
Prima ediţie Noiembrie 2017 Drepturi de autor © 2017 ASUSTeK COMPUTER INC. Toate drepturile rezervate. Nicio parte din acest manual, inclusiv produsele sau software-urile descrise în acesta, nu poate fi reprodusă, transmisă, transcrisă, stocată într-un sistem de recuperare sau tradusă în orice limbă sau prin orice mijloace, cu excepţia documentaţiei păstrate de cumpărător în scopuri de recuperare, fără permisiunea scrisă expresă a companiei ASUSTeK COMPUTER INC. („ASUS”).
Cuprins Cuprins......................................................................................................... iii Notificări....................................................................................................... iv Informaţii privind siguranţa......................................................................... v Îngrijire şi curăţare...................................................................................... vi Takeback Services......................................
Notificări Declaraţia Comisiei federale de comunicaţii Acest dispozitiv respectă Secţiunea 15 din Regulamentul FCC. Funcţionarea presupune următoarele două condiţii: • Acest dispozitiv nu provoacă interferenţe dăunătoare şi • Acest dispozitiv trebuie să accepte orice interferenţă primită, inclusiv interferenţele care pot cauza o funcţionare nedorită. Acest echipament a fost testat şi s-a dovedit că respectă limitele pentru un dispozitiv digital de Clasa B, conform Secţiunii 15 din Regulamentul FCC.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouiller du Canada. Informaţii privind siguranţa • Înainte de configurarea monitorului, citiţi cu atenţie toate documentele care v-au fost furnizate în pachet. • Pentru prevenirea incendiilor sau a pericolelor electrice, nu expuneţi niciodată monitorul la ploaie sau umezeală. • Nu încercaţi niciodată să deschideţi carcasa monitorului.
• Reglarea controalelor de volum, precum şi egalizatorul altor setări decât poziţia centrală pot mări tensiunea de ieşire audio/căşti şi, prin urmare, nivelul de presiune al sunetului. Acest simbol cu un coş de gunoi tăiat indică faptul că produsul (echipament electric sau electronic, şi bateria cu celule care conţin mercur) nu trebuie eliminate la un loc cu deşeurile municipale. Vă rugăm să verificaţi reglementările locale pentru eliminarea produselor electronice.
Simboluri utilizate în acest ghid ATENŢIE: Informaţie pentru prevenirea accidentărilor personale atunci când încercaţi să rezolvaţi o sarcină. AVERTISMENT: Informaţie pentru prevenirea daunelor componentelor atunci când încercaţi să rezolvaţi o sarcină. IMPORTANT: Informaţii pe care TREBUIE să le urmaţi pentru rezolvarea unei sarcini. OBSERVAŢIE: Sfaturi şi informaţii suplimentare pentru a vă ajuta să rezolvaţi o sarcină.
viii
1.1 Bun venit! Vă mulţumim că aţi achiziţionat monitorul LCD ASUS®! Cel mai nou monitor LCD cu ecran lat de la ASUS oferă un afişaj mai mare, mai luminos şi mai clar, plus o serie de funcţii care vă îmbunătăţesc experienţa de vizionare. Cu aceste funcţii vă puteţi bucura de confortul şi experienţa vizuală încântătoare pe care v-o oferă monitorul! 1.
1.3 Prezentare monitor 1.3.1 Partea frontală 1 2 3 4 5 6 7 Menu Close Input Select QuickFit Brightness HDR 1. Butonul Meniu (5 direcţii): • Apăsaţi acest buton pentru a intra în meniul OSD. • Acţionează elementele selectate din meniul OSD. • Măreşte/micşorează valorile sau mută selecţia în sus/jos/stânga/ dreapta. 2. Buton închidere: • Iese din meniul OSD. • Activează şi dezactivează funcţia Blocare taste, la o apăsare continuă de aproximativ 5 secunde.
5. Scurtătură • Implicit: Tasta rapidă Strălucire • Pentru a schimba funcţia tastei rapide, accesaţi meniul Scurtătură > Scurtătură 1. Scurtătură 6. • Implicit: Tastă rapidă HDR • Pentru a schimba funcţia tastei rapide, accesaţi meniul Scurtătură > Scurtătură 2. 7. Buton de pornire/indicator de pornire • Porneşte/opreşte monitorul. • Descrierea culorilor indicatorului de pornire este prezentată în tabelul de mai jos. 1.3.
6. 7. USB 2.0 Tip A. Acest port este folosit numai în scopuri de service. Thunderbolt. Aceste porturi sunt utilizate pentru conectarea unui dispozitiv compatibil Thunderbolt. Aceste porturi îmbunătăţesc transferul de date, ieşirea video (rezoluţie max. acceptată: 3840 x 2160 la 60 Hz) şi încărcarea într-un singur conector compact (Portul asigură o alimentare de max. 60 W (5 V/3 A, 9 V/3 A, 15 V/3 A, 20 V/3 A), iar celălalt port asigură 15 W (5 V/3 A).).
1. Aliniere grilă Modelele grilei îi ajută pe designeri şi pe utilizatori să organizeze conţinutul şi modelul pe o pagină şi să obţină un aspect consistent. Aliniere grilă Alignment Grid 2. A4 Funcţia QuickFit oferă dimensiunea de hârtie standard A4, iar utilizatorii îşi pot vizualiza documentele pe ecran la dimensiunea reală. A4 A4 3. B5 Funcţia QuickFit oferă dimensiunea de hârtie standard B5, iar utilizatorii îşi pot vizualiza documentele pe ecran la dimensiunea reală.
4. Personalizare Dumneavoastră puteţi decide dimensiunea cadrului apăsând butonul Meniu (5 direcţii) în sus/jos/stânga/dreapta. Puteţi ţine apăsat butonul Meniu (5 direcţii) cel puţin 3 secunde pentru a transforma măsurătorile din milimetri în inci. Personalizare H16 V15 5. Riglă Acest model prezintă un liniar fizic în partea stângă şi cea de sus. Puteţi ţine apăsat butonul Meniu (5 direcţii) cel puţin 3 secunde pentru a transforma măsurătorile din sistemul metric în cel imperial.
Monitor LCD ASUS Seria PA32U 1-7
1-8 Capitolul 1: Prezentare produs
2.1 Montarea piciorului/bazei Pentru asamblarea bazei monitorului: 1. Aşezaţi partea frontală a monitorului pe o masă. 2. Îndepărtaţi capacul portului de intrare/ieşire (Figura 1). 3. Ataşaţi baza la picior, asigurându-vă că agăţătoarea de pe picior pătrunde în canelura bazei (Figura 2). 2 1 (Figura 2) (Figura 1) Vă recomandăm să acoperiţi suprafaţa mesei cu un material moale pentru a preveni deteriorarea monitorului. 2.
2.3 • Kitul de montare pe perete VESA (100 x 100 mm) este achiziţionat separat. • Folosiţi numai Suporturi pentru montaj pe perete din lista UL, cu o greutate/sarcină minimă de 22,7 kg (dimensiune şuruburi: M4 x 10 mm). Reglarea monitorului • Pentru o vizualizare optimă, vă recomandăm să priviţi direct spre monitor şi apoi să reglaţi monitorul la unghiul care vă este cel mai confortabil. • Ţineţi suportul pentru a preveni căderea monitorului în timpul modificării unghiului.
Pivotarea monitorului 1. Ridicaţi monitorul în poziţia cea mai înaltă. 2. Înclinaţi monitorul la unghiul maxim. 3. Pivotaţi monitorul la unghiul dorit. +23° ~ -5° Este normal ca monitorul să se clatine puţin atunci când reglaţi unghiul de vizualizare. 4. Elementul din meniul OSD se va roti automat atunci când se roteşte monitorul.
2.4 1. Conectarea cablurilor Conectaţi cablurile respectând următoarele instrucţiuni: Numai pentru service • Pentru conectarea cablului de alimentare: Conectaţi un capăt al cablului de alimentare la portul de intrare AC al monitorului şi celălalt la o priză. • Pentru conectarea cablului HDMI/DisplayPort: a. Conectaţi un capăt al cablului HDMI/DisplayPort la mufa HDMI/ DisplayPort a monitorului. b. Conectaţi celălalt capăt al cablului HDMI/DisplayPort la mufa HDMI/ DisplayPort a dispozitivului dvs.
Când aceste cabluri sunt conectate, puteţi selecta semnalul dorit de la elementul Selectare introducere din meniul OSD. 2. Montaţi capacul portului de intrare/ieşire şi/sau clema cablului, dacă este cazul. 2.5 Pornirea monitorului Apăsaţi butonul de pornire . Consultaţi paginile 1-2 pentru locaţia butonului de pornire. Indicatorul de pornire se va aprinde cu o lumină de culoare albă, arătând că monitorul este PORNIT.
2-6 Capitolul 2: Configurare
3.1 Meniu OSD (On-Screen Display) 3.1.1 Mod de reconfigurare Splendid Mod standard DisplayPort 3840 x 2160@ PA32U 60Hz Mod standard Mod sRGB Mode Adobe RGB Mod Rec. 2020 Mod DCI-P3 Mod Rec. 709 Mod simulare HDR Mod utilizator 1 Mod utilizator 2 1. Apăsaţi 2. Mişcaţi butonul Meniu (5 direcţii) în sus/jos/stânga/dreapta pentru a naviga printre funcţii. Selectaţi funcţia dorită şi apăsaţi butonul Meniu (5 direcţii) pentru a o activa.
3.1.2 1. Prezentarea funcţiei OSD Splendid Această funcţie conţine 9 sub-funcţii pe care le puteţi selecta pentru preferinţele dumneavoastră. Fiecare mod are opţiunea Resetare, permiţându-vă să păstraţi setarea sau să reveniţi la modul presetat. Pentru a activa această funcţie, va trebui să procedaţi astfel: dezactivaţi funcţia Efect ambiental şi funcţia HDR pe dispozitivul dvs. Splendid Mod standard DisplayPort 3840 x 2160@ PA32U 60Hz M o d s t a n d ar d Mod sRGB Mode Adobe RGB Mod Rec.
Mod utiliMod Mod Mod Mod Mod Mod Mod zator 1/ Adobe Rec. simulare standard sRGB DCI-P3 Rec. 709 Mod utiliRGB 2020 HDR zator 2 Funcţie Culoare temperatură Strălucire 6500K 50 Contrast 80 Claritate Activare Saturaţie Mediu (50) Mediu (50) Nuanţă Setări avansate Activare Nivel negru Activare Gama Activare Compensare uniformitate Activare 2.
Consultaţi recomandările de mai jos, pentru a atenua stresul asupra ochilor: 3. • Dacă se lucrează ore îndelungate, se recomandă ca utilizatorii să-şi mai mute privirea de la ecran o anumită perioadă de timp. După aproximativ 1 oră de lucru continuu la computer, se recomandă să fie luate scurte pauze (cel puţin 5 minute). Pauzele scurte şi frecvente sunt mai eficiente decât o singură pauză mai lungă.
• Gama: Vă permite să setaţi modul de culoare la 2.6, 2.4, 2.2, 2.0 sau 1.8. • Nivel negru: Pentru a regla nivelul primului semnal iniţializat la nivelul de gri cel mai închis. • Setări avansate: * Reglare Nuanţă pe şase axe. * Reglare Saturaţie pe şase axe. * Reglează nivelurile de creştere pentru R, G, B. * • 4. Reglează valorile contrabalansului nivelului de negru pentru R, G, B.
• Compensare uniformitate: Reglează diferite zone de pe ecran pentru a reduce orice erori de uniformitate a ecranului, oferind o luminozitate şi o culoare consistentă pe întregul ecran. Pentru a activa această funcţie, va trebui să procedaţi astfel: dezactivaţi funcţia Estompare dinamică şi funcţia HDR pe dispozitivul dvs. • VividPixel: Intensifică conturul imaginii afişate şi generează pe ecran imagini de înaltă calitate.
6. Setare PIP/PBP Setarea PIP/PBP vă permite să deschideţi altă sub-fereastră conectată la altă sursă video, pe lângă fereastra principală din sursa dumneavoastră video originală. Prin activarea acestei funcţii, monitorul afişează până la 2 imagini din surse video diferite. Pentru a activa această funcţie, va trebui să procedaţi astfel: dezactivaţi funcţiile Estompare dinamică, Sincronizare adaptivă şi HDR pe dispozitivul dvs.
7. Selectare introducere În această funcţie vă puteţi selecta sursa de intrare dorită. Selectare introducere Mod standard DisplayPort 3840 x 2160@ PA32U 60Hz HDMI-1 HDMI-2 HDMI-3 HDMI-4 DisplayP o r t Thunderb o l t Dacă este conectat un dispozitiv la un port Thunderbolt, celălalt port va emite doar semnal DisplayPort. 8. Configurare sistem Vă permite să configuraţi sistemul.
• Adaptive-Sync (doar DisplayPort/Thunderbolt): Permite unei surse video compatibile Adaptive-Sync* să regleze dinamic rata de reîmprospătare a ecranului, bazat pe frecvenţa cadrelor unui conţinut tipic, pentru o actualizare a afişajului caracterizată de eficienţă energetică, lipsa întreruperilor şi latenţă redusă. * Adaptive-Sync poate fi activat doar în intervalul 40Hz ~ 60Hz.
• • Limbă: Pentru fiecare selecţie există 21 de limbi, inclusiv engleză, franceză, germană, italiană, spaniolă, olandeză, portugheză, rusă, cehă, croată, poloneză, română, maghiară, turcă, chineză simplificată, chineză tradiţională, japoneză, coreeană, thailandeză, indoneză, persană. Flux DisplayPort: Compatibilitatea cu placa video. Selectaţi DisplayPort 1.1 sau DisplayPort 1.2 după versiunea DP a plăcii video. Interfaţa DisplayPort 1.
3.2 Prezentare specificaţii Tip panou Dimensiune panou Rezoluţie maximă Dimensiune pixeli Strălucire Raport contrast (tipic) Raport contrast (max.) Unghi de vizualizare (O/V) CR>10 Culori afişaj Gamut culoare Timp de răspuns Îmbunătăţire video SplendidPlus Selecţie SplendidPlus Selecţie culoare temperatură Intrare digitală Mufă jack pentru căşti Port USB 3.
Accesorii Conformitate şi standarde Cablu HDMI, cablu DisplayPort, cablu Thunderbolt, cablu de alimentare, cablu USB, ghid rapid de utilizare, garanţie, CD suport, clemă cablu, raport testare calibrare culoare, capac port intrare/ieşire, calibrare culoare (doar pentru PA32UC-K) UL/cUL, CB, CE, ErP, FCC, ICES-3, CCC, CEL, BSMI, CU, RCM, VCCI, UkrSEPRO, J-MOSS, RoHS, WEEE, PSE, KCC, eStandby, KC, ISO 9241-307, TUV Flicker Free, TUV Low Blue Light, Windows 7, 8.
3.
Rezoluţie 1920×1080p 1920×1080i 1440x480P 1440x576P 1280×720p 720×576p 720×480p 640×480p(VGA) 720(1440)×576i 720(1440)×480i Frecvenţă verticală (Hz) 24 50 59,94 60 50 59,94 60 59,94 60 50 50 59,94 60 50 59,94 60 59,94 60 50 59,94 60 Frecvenţă orizontală (KHz) 27 56,25 67,43 67,5 28,13 33,72 33,75 31,47 31,5 31,25 37,5 44,95 45 31,25 31,47 31,5 31,47 31,5 15,63 15,73 15,75 * Modurile care nu apar în tabel s-ar putea să nu fie acceptate.
Monitor LCD ASUS Seria PA32U 3-15
3-16 Capitolul 3: Meniu OSD (On-Screen Display)