PA32UCX sorozatú LCD monitor Használati útmutató
Első kiadás 2019. április Copyright © 2019 ASUSTeK COMPUTER INC. Minden jog fenntartva. A kézikönyv egyik részét sem (beleértve a termékek és a szoftver leírásait is) lehet sokszorosítani, továbbítani, átírni, tárolni visszakereső rendszerekben, illetve lefordítani más nyelvekre semmilyen formában illetve eszközzel az ASUSTeK COMPUTER INC. („ASUS”) előzetes írásbeli engedélye nélkül, a dokumentációt egyedül a vásárló tarthatja meg biztonsági okokból.
Tartalom Tartalom........................................................................................................ iii Megjegyzések............................................................................................... iv Biztonsági információk................................................................................ v Karbantartás és tisztítás............................................................................. vi Takeback Services...............................................
Megjegyzések Szövetségi hírközlési bizottság nyilatkozata A készülék megfelel az FCC szabályok 15. pontjának. Működtetéséhez a következő két feltételnek kell teljesülnie: • A készülék nem okozhat ártalmas interferenciát, és • A készüléknek el kell viselnie minden fogadott interferenciát, beleértve azt is, amelyik nem kívánatos működést okoz. A készüléket vizsgálatnak vetették alá, amelynek során megállapítást nyert, hogy a készülék teljesíti az FCC szabályzatának 15.
This Class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouiller du Canada. Biztonsági információk • A monitor beállítása előtt óvatosan olvassa el a csomagban található dokumentációt. • Tűz és áramütés megakadályozása érdekében soha ne tegye ki a monitort esőnek vagy nedvességnek. • Soha ne próbálja kinyitni a monitor házát.
• Ha műszaki hibát észlel a monitorral kapcsolatban, lépjen kapcsolatba egy képzett szakemberrel vagy a kereskedőjével. • A hangerőszabályozó beállítása, valamint a középső pozícióból elmozdított beállítások megnövelhetik a fül-/fejhallgató kimeneti feszültségét, amely a hangnyomás szintjét módosíthatja. Az áthúzott kerekes kuka szimbólum azt jelzi, hogy a terméket (elektromos, elektronikus berendezés és higanytartalmú gombelem) nem lehet a háztartási hulladékok közé tenni.
Jelen útmutatóban használt jelölések FIGYELMEZTETÉS: Információk arra vonatkozóan, hogy elkerülje a sérüléseket egy feladat elvégzése során. VIGYÁZAT: Információk arra vonatkozóan, hogy elkerülje az alkatrészek károsodását egy feladat elvégzése során. FONTOS: Olyan információk, amelyet KÖTELEZŐ követnie egy feladat elvégzése során. MEGJEGYZÉS: Tippek és további információk egy feladat elvégzésének elősegítéséhez.
viii
1.1 Üdvözöljük! Köszönjük, hogy megvásárolta az ASUS® LCD monitort! Az ASUS legújabb széles képernyős monitorja egy szélesebb, fényesebb, valamint kristálytiszta képernyőt biztosít, plusz egy sor olyan funkciót, amely megnöveli a vizuális élményt. Ezen funkciók segítségével élvezheti a kényelmes és elbűvölő vizuális élményeket, amelyeket a monitor nyújtani tud Önnek! 1.
1.3 A monitor bemutatása 1.3.1 Elölnézet 1 2 3 4 5 6 7 Menu Close Input Select QuickFit Brightness HDR 1. Menü (5 állású) gomb: • Az OSD menübe való belépéshez nyomja le ezt a gombot. • Alkalmazza a kiválasztott OSD menüelemeket. • Növeli/csökkenti az értékeket vagy fel/le/balra/jobbra mozgatja a kijelölést. 2. Bezárás gomb: • Kilépés az OSD menüből. • Be- és kikapcsolja a Gombzár funkciót egy hosszú, 5 másodperces nyomással. • Válasszon ki egy elérhető bemeneti forrást. 3.
5. Parancsikon • Alapértelmezett: Fényerő gyorsgomb • A gyorsgomb funkciójának módosításához lépjen a Parancsikon > Parancsikon 1 menübe. Parancsikon 6. • Alapértelmezett: HDR gyorsgomb • A gyorsgomb funkciójának módosításához lépjen a Parancsikon > Parancsikon 2 menübe. 7. Bekapcsoló gomb/állapotjelző fény • Be-/kikapcsolja a monitort. • Az állapotjelző fény színmeghatározása az alábbi táblázatban található. 1.3.
6. DisplayPort be. Ez a port egy DisplayPort kompatibilis eszköz csatlakoztatásához való. A DisplayPort adatfolyam alapértelmezett beállítása az OSD menüben DisplayPort 1.2. Átállíthatja DisplayPort 1.1 opcióra, ha eszközének kimenő jele DisplayPort 1.1. 7. 8. USB 2.0 A típus. Ez a port csak szervizcélokat szolgál. Thunderbolt. Ez a portok Thunderbolt kompatibilis eszközök csatlakoztatásához valók. Ezek a portok egyetlen kompakt csatlakozóba egyesítik az adatátvitelt, a videokimenetet (Max.
2. A4 A QuickFit szabványos A4 papírméretet kínál, hogy a felhasználók valós méretben tekinthessék meg dokumentumaikat a képernyőn. A4 A4 3. B5 A QuickFit szabványos B5 papírméretet kínál, hogy a felhasználók valós méretben tekinthessék meg dokumentumaikat a képernyőn. B5 B5 4. Egyéniesítés A keret méretét a Menü (5 állású) gomb fel/le/balra/jobbra mozgatásával állíthatja be. Lenyomhatja a Menü (5 állású) gombot 3 másodpercnél hosszabb ideig a mértékegység milliméter és inch közötti átváltásához.
5. Vonalzó Ez a minta fizikai vonalzót jelenít meg a felső és bal oldalon. Lenyomhatja a Menü (5 állású) gombot 3 másodpercnél hosszabb ideig a mértékegység metrikus és angolszász közötti átváltásához. Vonalzó 5 10 15 20 25 30 5 10 15 1.3.4 Egyéb funkciók 1. HDR A monitor támogatja a HDR formátumot. HDR tartalom észlelésekor a "HDR ON" (HDR BE) üzenet jelenik meg az információs oldalon. A HDR-tartalom nem támogatott, amikor a PIP/PBP mód be van kapcsolva. 2.
2.1 A monitor karjának/talpának rögzítése A monitor talpának az összeszereléséhez: 1. Tegye a monitort képernyővel lefelé egy asztalra. 2. Vegye le e bemeneti/kimeneti port fedelét (1. ábra). 3. Csatlakoztassa a talpat a karhoz, győződjön meg róla, hogy a kar akasztója illeszkedik a talpon lévő horonyba (2. ábra). 2 1 (2. ábra) (1. ábra) Javasoljuk, hogy takarja le az asztal felületét egy puha ruhával, hogy megakadályozza a monitor károsodását. 2.
2.3 • A VESA fali tartó készlet (100 x 100 mm) külön vásárolható meg. • Csak az UL listás fali konzolt használja minimum 22,7 kb. súllyal/ terheléssel (csavar mérete: M4 x 10 mm). A monitor beállítása • Az optimális megtekintéshez javasoljuk, hogy vegye figyelembe a monitor teljes felületét, majd állítsa be a monitor szögét úgy, hogy az a lehető legkényelmesebb legyen Önnek. • Tartsa meg az állványt, nehogy a monitor leessen, amikor módosítja annak a szögét.
A monitor elforgatása 1. Emelje fel a monitort a legmagasabb helyzetébe. 2. Döntse el a monitort a maximális szögben. 3. Fordítsa el a monitort, hogy beállítsa a kívánt szöget. +23° ~ -5° Normális, hogy a monitor kissé rázkódik, miközben beállítja a megtekintés szögét. 4. Az OSD menü a monitor elfordításával automatikus fordul.
2.4 1. A kábelek csatlakoztatása Csatlakoztassa a kábeleket a következő utasítások szerint: Kizárólag a szervizszemélyzet számára • A tápkábel csatlakoztatása: Csatlakoztassa megfelelően a tápkábel egyik végét a monitor AC bemeneti portjához, a másik végét pedig konnektorhoz. • A HDMI/DisplayPort kábel csatlakoztatása: Csatlakoztassa a HDMI/DisplayPort kábel egyik végét a monitor HDMI/ DisplayPort portjához. b.
d. A port max. 60 W (5 V/3 A, 9 V/3 A, 15 V/3 A, 20 V/3 A) teljesítményt, a másik port biztosít. pedig 15 W (5 V/3 A) teljesítményt Amikor ezek a kábelek csatlakoztatva vannak, akkor kiválaszthatja a kívánt jelet az OSD menüben a Bemenetválasztás elemből. 2. A kábelek elrendezése: Javasoljuk, hogy kövesse az alábbi elrendezést a kábel elvezetéséhez az állványon lévő kábelelvezető nyílás használatával. 1 3. 6 3 3 3 2 5 5 4 4 4 Csatlakoztassa a bemeneti/kimeneti port fedelét, ha szükséges.
2-6 2.
3.1 OSD (képernyőn megjelenő) menü 3.1.1 Hogyan kell ismételten konfigurálni ProArt Preset ASUS PA32UCX Normál mód DisplayPort 3840 x 2160@ 60Hz Normál mód sRGB mód Adobe RGB mód Rec. 2020 mód DCI-P3 mód DICOM mód Rec. 709 mód 1. Nyomja le a 2. Mozgassa a Menü (5 állású) gombot fel/le/balra/jobbra a funkciók közötti navigáláshoz. Jelölje ki a kívánt funkciót és nyomja le a Menü (5 állású) gombot az aktiválásához.
3.1.2 1. OSD funkció bemutatása ProArt Preset Ez a funkció 13 alfunkciót tartalmaz, amelyeket tetszés szerint kiválaszthat. Minden mód rendelkezik az Alaphelyzet kiválasztással, ami lehetővé teszi a beállítások kezelését vagy a visszatérést az előre beállított módba. A funkció aktiválásához tegye a következőket:kapcsolja ki a Környezeti effektus opciót, és tiltsa le a HDR-t a készülékén. ProArt Preset ASUS PA32UCX Normál mód DisplayPort 3840 x 2160@ 60Hz Normál mód sRGB mód Adobe RGB mód Rec.
• * PQ Optimized: Optimális HDR teljesítményt biztosít a kijelzők számára az ST2084-hez hasonló pontossággal a fényerő kapacitás tekintetében. * PQ Clip: Megőrzi a PQ-görbét, amíg a maximális fényességűképet a legnagyobb pontossággal jeleníti meg. A kijelző maximális értékénél magasabb ST2084 kódérték a maximális fényességhez lesz leképezve. A használathoz maximálisan 300 nit értéket is biztosítunk. * PQ Basic: HDR teljesítményt biztosít az általános, HDRtámogatású kijelzőkhöz.
Funkció DICOM mód Színhőmérs.
Tekintse meg a következőket, hogy enyhítse a szem megerőltetését: 3. • A felhasználóknak kell egy kis idő a kijelzőtől távol, ha hosszú órákon át dolgoznak. Javasoljuk, hogy egy óra folyamatos munka után a számítógép előtt tartson egy rövid szünetet (legalább 5 percet). A rövid, gyakori szünetek hatásosabbak, mint egy hosszú szünet. • A szem megerőltetésének és szárazságának minimalizálására a felhasználók időszakosan pihentessék a szemüket úgy, hogy messzi tárgyakra fókuszálnak.
• • Szín: * Hat tengelyes színárnyalat-állítás. * Hat tengelyes színtelítettség-állítás. * Az erősítési szinteket állítja az R, G, B esetében. * A fekete szint nullázási értékeket állítja az R, G, B esetében. Fekete szín szintje: A legsötétebb megjelenítési szint. * • 4. Jel: Az inicializált 1. Jelszintet a legsötétebb szürkéhez igazítja. * Háttérvilágítás: A háttérvilágítás sötétségének állításához.
• Egységesség kompenzáció: A képernyő egyes területeit állítja be a képernyő egyenetlenségi hibáinak csökkentése érdekében, így biztosítva egyenletes fényerőt és színeket a teljes képernyőn. A funkció aktiválásához tegye a következőket:kapcsolja ki a Dinamikus halványítás opciót, és tiltsa le a HDR-t a készülékén. • Bemeneti tartomány: A jeltartományt a megjelenítő teljes feketétől fehérig terjedő tartományához képezi le.
6. PIP/PBP beállítás A PIP/PBP beállítása lehetőséget ad az eredeti videoforráshoz csatlakozó főablak mellett egy újabb, másik videoforráshoz csatlakozó mellékablak megnyitására. Ennek a funkciónak az aktiválásával a monitor legfeljebb 2 képet jelenít meg különböző videoforrásokból. A funkció aktiválásához tegye a következőket:kapcsolja ki a Dinamikus halványítás és az Adaptive-Sync opciót, és tiltsa le a HDR-t a készülékén.
7. Bemenetválasztás Ebben a funkcióban kiválaszthatja a kívánt bemeneti forrást. Bemenetválasztás ASUS PA32UCX Normál mód DisplayPort 3840 x 2160@ 60Hz HDMI-1 HDMI-2 HDMI-3 DisplayPort Thunderbolt Ha egy Thunderbolt-port csatlakoztatva van, akkor a másik csak a DisplayPortjelet jeleníti meg. 8. Rendszer beállítás Lehetővé teszi a rendszer beállítását.
• Dinamikus dimmelés: Szinkronizálást végez a tartalmakkal a kontraszt módosítása közben a háttérfény dinamikus elhalványításához. A szinkronizálási sebesség esetén a következő beállítások közül választhat: “Gyors”, “Közepes” vagy “Fokozatos”. A funkció aktiválásához tegye a következőket: kapcsolja ki a PIP/PBP opciót. • • Energiatakarékos: * A “Normál szint” lehetővé teszi, hogy az USB lefelé irányú portok/ Thunderbolt portok külső eszközöket töltsenek, amikor a monitor energiatakarékos módba lép.
A funkció aktiválásához tegye a következőket:tiltsa le a HDR-t az eszközén, kapcsolja ki a Mozgás-szinkronizálás opciót, és állítsa a Kék fényszűrő beállítást 0. szintre. • • 9. Információ: Megjeleníti a monitor információit. Összes alaphelyzetbe: Az "Igen" lehetővé teszi az összes alapértelmezett beállítás visszaállítását. Parancsikon Meghatározza a Parancsikon 1 és 2 funkcióját.
3.2 Műszaki adatok összefoglalása Hőmérséklet (működési) TFT LCD 32,0" (16:9, 81,28 cm) széles képernyő 3840 x 2160 0,1845 mm 600 cd/m2 (típ.), 1200 cd/m2 (max.) 1.000.000:1 100.000.000:1 (ha a Dinamikus dimmelés be van kapcsolva) 178˚/178˚ 1,07 milliárd Rec2020 89,5%, DCI-P3 99% 5 ms (szürkéből szürkébe) 13 előre beállított színmód 5 színhőmérséklet HDMI v2.0b, DisplayPort v1.
Megfelelőség és szabványok UL/cUL, CB, CE, FCC, CCC, BSMI, CU, VCCI, J-MOSS, RoHS, WEEE, PSE, KCC, ICES-3, ErP, CEL, ISO 9241-307, UkrSEPRO, RCM, MEPS, PC Recycle, KC, e-Standby, TUV Flicker Free, TUV Low Blue Light, Windows 7, 8.1 és 10 WHQL, Mac Compliance*** *A műszaki adatok előzetes bejelentés nélkül változhatnak. **A képernyő fényereje 200 nit audio/USB/Kártyaolvasó kapcsolat nélkül. ***Szükséges: Mac OS 10.10.x, 10.11.x, 10.12.x.
3.3 Körvonal méretek ASUS PA32UCX Outline Dimension *Unit:mm(inch) 90 ° Pivot:+/-90 Degree ° 90 23° 5° 163.23 [6.43] 152.49 [6.00] 212.07 [8.35] 201.32 [7.93] 9,20 [0.36] 199,26 [7.84] 354,24 [13.95] 726,88 [28.62] 708,48 [27.89] 350,00 [13.78] 17,85 [0.70] 8,61 [0.34] 9,20 [0.36] 239,40 [9.43] 60 ° 398,52 [15.69] 425,87 [16.77] 599,49 [23.60] Swivel:+/-60 Degree 17,92 [0.71] 49,75 [1.96] 93,36 [3.68] 239,40 [9.43] 258.00 [10.16] 130.00 [5.12] 388,00 [15.28] 430,70 [16.
3.4 Hibaelhárítás (GYIK) Probléma A LED-es izzó nincs BEKAPCSOLVA A LED-es izzó borostyánsárgán világít és a képernyőn nem látható kép A képernyő képe túl világos vagy sötét A képernyő képe ugrál vagy egy hullámos minta látható a képen A képernyőn színhibák láthatóak (a fehér nem néz ki fehérnek) Nincs hang, vagy túl halk a hang Lehetséges megoldások • Nyomja meg a gombot, hogy ellenőrizze, hogy a monitor BEKAPCSOLT módban van-e.
3.
Felbontás 1920 × 1080p 1920 × 1080i 1440x480P 1440x576P 1280 × 720p 720 × 576p 720 × 480p 640 × 480p(VGA) 720(1440) × 576i 720(1440) × 480i Függőleges frekvencia (Hz) 24 50 59,94 60 50 59,94 60 59,94 60 50 50 59,94 60 50 59,94 60 59,94 60 50 59,94 60 Vízszintes frekvencia (kHz) 27 56,25 67,43 67,5 28,13 33,72 33,75 31,47 31,5 31,25 37,5 44,95 45 31,25 31,47 31,5 31,47 31,5 15,63 15,73 15,75 * Előfordulhat, hogy a táblázatban nem szereplő üzemmódok nem támogatottak.