PA32UCX-serien LCD-monitor Användarguide
Första upplagan April 2019 Copyright © 2019 ASUSTeK COMPUTER INC. Med ensamrätt. Ingen del av denna manual, inklusive produkter och programvara som beskrivs i den, får utan skriftligt tillstånd från ASUSTeK COMPUTER INC. reproduceras, överföras, transkriberas, sparas i ett sökbart system eller översättas till något språk oavsett form eller metod, förutom dokumentation som förvaras av köparen som säkerhetskopia. ("ASUS").
Innehåll Innehåll......................................................................................................... iii Myndighetsinformation............................................................................... iv Säkerhetsinformation................................................................................... v Skötsel och rengöring................................................................................. vi Takeback Services....................................................
Myndighetsinformation Deklaration från amerikanska telekommunikationsmyndigheten FCC Den här apparaten uppfyller kraven i del 15 av FCC-reglerna. Användning är föremål för följande två villkor: • Apparaten får inte förorsaka skadliga störningar • Apparaten måste acceptera alla mottagna störningar, inklusive störningar som kan förorsaka oönskad funktion. Utrustningen har testats och befunnits överenstämma med gränserna för en digital apparat av klass B enligt del 15 i FCC:s bestämmelser.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouiller du Canada. Säkerhetsinformation • Läs noga igenom all dokumentation som medföljde i förpackningen innan du installerar bildskärmen. • Förebygg risk för brand eller elstöt genom att inte utsätta bildskärmen för regn eller väta. • Försök inte att öppna bildskärmens hölje. Bildskärmens inre delar innehåller farlig högspänning som kan förorsaka allvarliga kroppskador.
Denna symbol med den överkorsade soptunnan betyder att produkten (elektrisk och elektronisk utrustning samt knappcellsbatterier som innehåller kvicksilver) inte får kastas i de vanliga hushållssoporna. Kontrollera de lokala bestämmelserna för hantering av uttjänt elektronisk och elektrisk utrustning. Skötsel och rengöring • Innan du lyfter eller flyttar på bildskärmen är det bäst om du kopplar ur kablarna och nätsladden. Använd korrekt lyftteknik när du flyttar på bildskärmen.
Hitta ytterligare information I följande källor hittar du ytterligare information och uppdateringar av produkt och programvara. 1. ASUS webbplatser ASUS webbplatser runtom i världen innehåller uppdaterad information om ASUS hårdvaru- och programvaruprodukter. Se http://www.asus.com. 2. Extra dokumentation Produktförpackningen kan innehålla ytterligare dokumentation från återförsäljaren. Dessa dokument tillhör inte standardförpackningen.
viii
1.1 Välkommen! Tack för att du köpte en LCD-monitor från ASUS®! ASUS senaste LCD-bredbildsskärm har en tydligare, bredare och ljusstarkare skärm med en lång rad egenskaper som ger en förhöjd visuell upplevelse. Tack vare dessa egenskaper kan du dra full nytta av bekvämligheten och den njutbara synupplevelsen som bildskärmen bjuder på! 1.
1.3 Introduktion till bildskärmen 1.3.1 Vy framifrån 1 2 3 4 5 6 7 Menu Close Input Select QuickFit Brightness HDR 1. Meny (5-vägs)-knapp: • Tryck på den här knappen för att aktivera OSD-menyn. • Aktiverar/utför de alternativ som är markerade i OSD-menyn. • Ökar/minskar värden eller flyttar markören uppåt/neråt/åt vänster/åt höger. 2. Stäng-knapp: • Avslutar OSD-menyn. • Stänger av respektive sätter på Key Lock (Knapplås)-funktionen med en lång knapptryckning i 5 sekunder.
5. Genväg • Standard: Snabbtangent för Brightness (Ljusstyrka) • För att ändra snabbtangentens funktionen, gå till menyn Shortcut (Genväg) > Shortcut 1 (Genväg 1). 6. Genväg • Standard: Snabbtangent för HDR • För att ändra snabbtangentens funktionen, gå till menyn Shortcut (Genväg) > Shortcut 2 (Genväg 2). 7. Av/på-knapp/strömindikator • Stänger av/sätter på bildskärmen. • Tabellen nedan förklarar betydelsen av strömindikatorns olika färger. 1.3.
7. 8. USB 2.0 typ A. Denna port är endast avsedd för service. Thunderbolt. Dessa portar är avsedda för anslutning till enheter som är kompatibla med Thunderbolt. Dessa portar kombinerar dataöverföring, videoutmatning (Max upplösning som stöds: 3840 x 2160@ 60Hz) och laddning i en enda kompakt anslutning (Porten erbjuder max 60W (5V/3A, 9V/3A, 15V/3A, 20V/3A) strömförsörjning och den andra porten erbjuder 15W (5V/3A).). Den av portarna som först ansluts kommer att detekteras som en ingångskälla.
2. A4 QuickFit erbjuder A4-papperstandardstorlek så att användare kan visa sina dokument i naturlig storlek på skärmen. A4 A4 3. B5 QuickFit erbjuder B5-papperstandardstorlek så att användare kan visa sina dokument i naturlig storlek på skärmen. B5 B5 4. Anpassning Du kan avgöra ramstorleken genom att flytta Meny (5-vägs) knappen uppåt/ nedåt/åt vänster/åt höger. Du kan trycka på Meny (5-vägs) knappen i mer än 3 sekunder för att byta måttenhet mellan millimeter och tum.
5. Linjal Detta mönster visar en fysisk linjal längs den övre kanten och vänster sida. Du kan trycka på Meny (5-vägs) knappen i mer än 3 sekunder för att byta måttenhet mellan metersystemet och brittiska måttenheter. Linjal 5 10 15 20 25 30 5 10 15 1.3.4 Övriga funktioner 1. HDR Skärmen stöder HDR-format. När HDR-innehåll detekteras visas meddelandet "HDR ON" (HDR PÅ) och visas på sidan Information. HDR-innehåll stöds inte när PIP/PBP-läget är på. 2.
2.1 Sätta fast armen/foten Montering av bildskärmens fot: 1. Lägg bildskärmen med framsidan vänd neråt på ett bord. 2. Ta bort ingångs-/utgångsportskyddet (Bild 1). 3. Fäst foten i armen. Kontrollera att fliken på armen passar in i urtaget på foten (Bild 2). 2 1 (Bild 2) (Bild 1) Vi rekommenderar att du täcker bordsytan med mjukt tyg så att bildskärmen inte skadas. 2.
2.3 • VESA-väggmonteringssatsen (100 x 100 mm) inköps separat. • Använd endast ett UL-listat väggmonteringsfäste med minsta vikt/ belastning 22,7 kg (Skruvstorlek: M4 x 10 mm). Justering av bildskärmen • För bästa möjliga visning rekommenderar vi att du betraktar hela bildskärmsytan och sedan justerar bildskärmen till den vinkel du föredrar. • Håll i stativet för att förhindra att bildskärmen faller/välter när du ändrar vinkeln.
Vrida bildskärmen mellan liggande och stående 1. Lyft upp bildskärmen till det högsta läget. 2. Luta bildskärmen maximalt bakåt. 3. Sväng bildskärmen till önskad vinkel. +23° ~ -5° Det är normalt att bildskärmen skakar en aning medan du justerar visningsvinkeln. 4. OSD-menyobjektet kommer att roteras automatiskt när bildskärmen roteras.
2.4 1. Ansluta kablarna Anslut kablarna enligt följande anvisningar: Endast för service • Så här ansluter du strömkabeln: Anslut ena änden av nätsladden ordentligt till bildskärmens ingångsport för växelström (AC) och den andra änden till ett eluttag. • Så här ansluter du HDMI/DisplayPort-kabeln: Anslut ena änden av HDMI/DisplayPort-kabeln till bildskärmens HDMI/ DisplayPort-port. b. Anslut den andra änden av HDMI/DisplayPort-kabeln till enhetens HDMI/DisplayPort-port.
d. Porten erbjuder max 60W (5V/3A, 9V/3A, 15V/3A, 20V/3A) strömförsörjning och den andra porten erbjuder 15W (5V/3A). När kablarna är anslutna kan du välja önskad signal från alternativet Input Select (Ingångsval) i OSD-menyn. 2. Arrangera kablarna: Vi rekommenderar att du följer nedanstående ordning för att lotsa kabeln genom kabelhanteringsskåran på stativet. 1 3. 6 3 3 3 2 5 5 4 4 4 Sätt vid behov fast ingångs-/utgångsportskyddet. 2.5 Sätta på bildskärmen Tryck på av/på-knappen .
2-6 Kapitel 2: Montering och installation
3.1 OSD-menyn (Skärmmenyn) 3.1.1 Så här ändrar du inställningarna ProArt Preset ASUS PA32UCX Standard Mode DisplayPort 3840 x 2160@ 60Hz Standard Mode sRGB Mode Adobe RGB Mode Rec 2020 Mode DCI-P3 Mode DICOM mode Rec. 709 Mode 1. Tryck på 2. Flytta Meny(5-vägs)-knappen uppåt/neråt/åt vänster/åt höger för att bläddra mellan menyalternativen. Markera önskat alternativ och tryck på knappen Meny (5-vägs) för att aktivera det.
3.1.2 1. Introduktion till alternativ i OSD-menyn ProArt Preset Den här funktionen innehåller 13 underfunktioner som du kan välja efter dina önskemål. Varje läge erbjuder valet Reset (Återställ) så att du kan behålla din egen inställning eller återgå till det förinställda läget. För att aktivera den här funktionen måste du göra följande:stäng av omgivande effekt och inaktivera HDR på din enhet.
* PQ Optimized: Ger optimerade HDR-prestanda för bildskärmen med en precision uppgående till ST2084 avseende luminanskapaciteten vid visning. * PQ Clip: Bibehåller PQ-kurvan tills maximal ljusstyrka visas med precision. ST2084-kodvärde med högre visning än maximalt kartläggs till maximal ljusstyrka. Vi tillhandahåller också högst 300 nits för din användning. * PQ Basic: Ger HDR-prestanda för generella bildvisningsenheter med HDR-stöd.
HDR_ Användarläge 1/ DolbyVisionAnvändarläge 2 läge Färgtemp.
Se följande för att mildra påfrestningen på ögonen: 3. • Om bildskärmen ska användas flera timmar bör användaren ta pauser från bildskärmen. Vi rekommenderar en kort paus (på minst 5 minuter) efter cirka 1 timmes oavbruten användning av datorn. Att ofta ta kortare pauser är effektivare än en enda lång paus. • För att begränsa torrhet i och påfrestningar på ögonen bör användare regelbundet vila ögonen genom att fokusera på föremål som befinner sig långt borta.
• Gamma: Låter dig ställa in färgläge till 2.6, 2.4, 2.2, 2.0 eller 1.8. • Color (Färg): • * Färgtonsjustering på sex axlar. * Färgmättnadsjustering på sex axlar. * Justerar förstärkningsnivåer för R, G och B. * Justerar värden för svartnivåförskjutning för R, G och B. Black Level (Svartnivå): Den mörkaste nivån på skärmen. * Signal: För att justera den påbörjade första signalnivå av den mörkaste nivån av grå. * • 4. Backlight (Bakgrundsbelysning): Justera bakgrundsbelysningens mörker.
• • För att aktivera den här funktionen måste du göra följande:stäng av PBP. • 4:3 är endast tillgänglig när ingångskällan är i 4:3-format. OverScan är endast tillgänglig för HDMI-ingångskälla. Uniformity Compensation (Enhetlighetskompensering): Justerar olika områden på skärmen för att reducera eventuella skärmenhetlighetsfel, och ger konsekvent ljusstyrka och färg över hela skärmen. För att aktivera den här funktionen måste du göra följande:stäng av dynamisk dämpning och inaktivera HDR på din enhet.
6. PIP/PBP Setting (Inställning för BiB/BbB) PIP/PBP Setting (Inställningen för BiB/BbB) låter dig öppna ett underfönster från en annan videokälla, förutom huvudfönstret från den ursprungliga videokällan. Genom att aktivera denna funktion visar monitorn upp till 2 bilder från olika videokällor. För att aktivera den här funktionen måste du göra följande:stäng av dynamisk dämpning, stäng av Adaptive-Sync och inaktivera HDR på din enhet.
7. Input Select (Ingångsval) Med det här alternativet kan du välja önskad inmatningskälla. Input Select ASUS PA32UCX Standard Mode DisplayPort 3840 x 2160@ 60Hz HDM I -1 HDM I -2 HDM I -3 Di spl ayP o rt Thunde rb o lt Om en Thunderbolt-port är ansluten matar den andra endast ut DisplayPortsignalen. 8. System Setup (Systeminställning) Justerar systemkonfigurationen.
* Adaptive-Sync går bara att aktivera inom området 40 Hz ~ 60 Hz. * För information om vilka grafikkort som stöds, minimikrav för PC-system och nödvändiga drivrutiner, kontakta grafikkortstillverkarna. För att aktivera den här funktionen måste du göra följande:stäng av Motion Sync, stäng av PIP/PBP-läge och ställ in DisplayPort Stream till DisplayPort 1.2.
• • • Key Lock (Knapplås): Avaktiverar alla funktionsknappar. Tryck på knappen som är näst högst upp i fem sekunder för att avbryta knapplåsfunktionen. Power Indicator (Strömindikator): Stänger av/sätter på strömindikatorn. Ambient Effect (Omgivningseffekt): Synkroniserar skärmens ljusstyrka med omgivande ljusförändringar. För att aktivera den här funktionen måste du göra följande:inaktivera HDR på din enhet, stäng av rörelsesynk. och ställ in blåljusfiltret till nivå 0. • • 9.
3.2 Sammanfattning av specifikationer Paneltyp Panelstorlek Högsta upplösning Pixelavstånd Ljusstyrka Kontrastförhållande (typ.) Kontrastförhållande (max.) Visningsvinkel (H/V) CR > 10 Skärmfärger Färgomfång Svarstid ProArt Preset-val Färgtemperatururval Digital ingång Utgångsport för hörlurar USB 3.
Överensstämmelse och standarder UL/cUL, CB, CE, FCC, CCC, BSMI, CU, VCCI, J-MOSS, RoHS, WEEE, PSE, KCC, ICES-3, ErP, CEL, ISO 9241-307, UkrSEPRO, RCM, MEPS, PC Recycle, KC, e-Standby, TUV Flicker Free, TUV Low Blue Light, Windows 7, 8.1 och 10 WHQL, Mac Compliance*** *Specifikationerna kan komma att ändras utan föregående meddelande. **Vid uppmätt skärmljusstyrka på 200 cd/m2 utan anslutning till ljud/USB/kortläsare. ***Kräver Mac OS 10.10.x, 10.11.x, 10.12.x.
3.3 Skissmått ASUS PA32UCX Outline Dimension *Unit:mm(inch) 90 ° Pivot:+/-90 Degree 90 ° 23° 5° 163.23 [6.43] 152.49 [6.00] 212.07 [8.35] 201.32 [7.93] 9,20 [0.36] 199,26 [7.84] 354,24 [13.95] 726,88 [28.62] 708,48 [27.89] 350,00 [13.78] 17,85 [0.70] 8,61 [0.34] 9,20 [0.36] 239,40 [9.43] 60 ° 398,52 [15.69] 425,87 [16.77] 599,49 [23.60] Swivel:+/-60 Degree 17,92 [0.71] 49,75 [1.96] 93,36 [3.68] 239,40 [9.43] 258.00 [10.16] 130.00 [5.12] 388,00 [15.28] 430,70 [16.96] 60 ° 173,62 [6.
3.4 Felsökning (frågor och svar) Problem Strömindikatorn är inte PÅ Strömindikatorn lyser orange och ingen bild syns på skärmen Skärmbilden är för ljus eller mörk Skärmbilden studsar eller ett vågmönster löper över bilden Felaktig färg på skärmbilden (vitt ser inte vitt ut) Inget ljud eller lågt ljud ASUS PA32UCX-serien LCD-monitor Möjlig lösning • Tryck på -knappen för att kontrollera om bildskärmen är PÅ. • Kontrollera att strömkabeln är korrekt ansluten till skärmen och eluttaget.
3.
Upplösning 1920 × 1080p 1920 × 1080i 1440x480P 1440x576P 1280 × 720p 720 × 576p 720 × 480p 640 × 480p(VGA) 720(1440) × 576i 720(1440) × 480i Vertikal Frekvens (Hz) 24 50 59,94 60 50 59,94 60 59,94 60 50 50 59,94 60 50 59,94 60 59,94 60 50 59,94 60 Horisontell frekvens (kHz) 27 56,25 67,43 67,5 28,13 33,72 33,75 31,47 31,5 31,25 37,5 44,95 45 31,25 31,47 31,5 31,47 31,5 15,63 15,73 15,75 * Lägen som inte anges i tabellen kanske inte stöds.