E22324 First Edition / November 2023 E-Manual
COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Table of Contents ASUS ProArt Calibration...........................................................................................4 Functions.......................................................................................................................5 Color Calibration.............................................................................................................. 5 Customize Target......................................................................................................
ASUS ProArt Calibration ASUS ProArt Calibration allows you to calibrate the color and uniformity of your display. Download and install the latest ASUS ProArt Calibration at www.asus.com/support/Download-Center/. NOTE: 4 • If you have installed the old version of ASUS ProArt Calibration, uninstall it before having the latest version installed. • The screenshots are for reference only and may vary with the software version and display model.
Functions Color Calibration Color calibration is the main function of ASUS ProArt Calibration. It allows you to calibrate the color of your display to meet your requirements. On selected display models, it also allows you to calibrate the uniformity of your display to ensure consistent brightness across the entire screen.
Customize Target This tab shows the parameters that have been customized for the past calibration. You can reapply a listed parameter to calibrate your display. To delete a parameter, select the parameter and click Delete.
History This tab allows you to view and export the past calibration reports. To delete a calibration report, select the report and click Delete.
Appointments This tab shows the details of scheduled calibrations and allows you to modify the appointments. To delete a scheduled calibration, select the appointment and click Delete.
Device On this page, you can save at most three calibrated profiles as User Mode 1, User Mode 2 and User Mode 3. If you want to reset a parameter to default, click Reset.
Embedded Calibrator Correlation NOTE: This function is only available for display models with a built-in calibrator. You can use this function to calibrate the embedded calibrator. It is recommended to calibrate the embedded calibrator every six months to ensure accuracy.
Calibration instructions Color calibration IMPORTANT! Before you begin the process: • Turn off HDR in Windows and ensure that your display is not set to HDR mode. • Set the color enhancements from the graphics card or any other software back to its default settings. • Install the necessary drivers for the calibrator. To begin color calibration: 1. Launch ASUS ProArt Calibration. 2. Select your display model.
3. Click on the Color Calibration tab, then select a parameter to apply. You can choose a parameter to apply in ProArt Preset, or set a parameter with your preference in User Mode. NOTE: ProArt Preset is only available on selected display models. 4. 12 Click Start Calibration to proceed.
ASUS ProArt Calibration 13
5. Connect the USB or Thunderbolt™ cable to your display, then click Next.
6. Connect the calibrator to your display and select your calibrator type, then click Next. NOTE: For models with a embedded calibrator, you can also choose to use the embedded calibrator for calibration.
7. You can choose to skip the color uniformity calibration, or select a calibration method to calibrate uniformity. Click Next to proceed. NOTE: 16 • Color uniformity calibration is only available for selected display models and parameters, and can only be performed with an external calibrator. • If you choose not to run the color uniformity calibration, skip to step 10.
8. Place the calibrator in the indicated area, then click Start.
9. 18 Place the calibrator in the white grid to start calibrating. Repeat the action until the entire process is completed.
10. Choose whether you would like to warm up your display before calibration, then click Next. NOTE: It is recommended to warm up your display for at least thirty minutes before calibration for the most accurate results.
11. Place the calibrator in the indicated area, then click Start to begin calibration. NOTE: 20 • Do not move the calibrator or turn off the display during the process; otherwise, the calibration may fail. • The entire process may take five minutes or more, depending on the parameter you apply. Please be patient during the process.
12. A calibration report will be generated when the calibration is completed. Click Export Report to save the report, or click Cancel to discard. Click Apply to save and apply the parameter.
Calibration appointments IMPORTANT! Before you begin the process: • Turn off HDR in Windows and ensure that your display is not set to HDR mode. • Set the color enhancements from the graphics card or any other software back to its default settings. • Install the necessary drivers for the calibrator. To schedule a calibration: 1. Launch ASUS ProArt Calibration. 2. Select your display model.
3. Click on the Color Calibration tab, then click Calibration Appointments.
4. Connect the calibrator to your display and select your calibrator type, then click Next. NOTE: For models with a embedded calibrator, you can also choose to use the embedded calibrator for calibration.
5. Configure the options for the scheduled calibration, then click Next.
6. 26 Choose whether you would like to have additional reminders before calibration, then click Next.
7. Choose whether you would like to warm up your display before calibration, then click Next. NOTE: It is recommended to warm up your display for at least thirty minutes before calibration for the most accurate results.
8. 28 Click Complete to confirm the appointment.
9. Click on the Appointments tab to view and manage the scheduled calibration.
Embedded calibrator correlation NOTE: Embedded calibrator correlation is only available for display models with a embedded calibrator. IMPORTANT! Before you begin the process: • Turn off HDR in Windows and ensure that your display is not set to HDR mode. • Set the color enhancements from the graphics card or any other software back to its default settings. • Install the necessary drivers for the calibrator.
To begin embedded calibrator correlation: 1. Launch ASUS ProArt Calibration. 2. Select your display model.
3. 32 Click on the Embedded Calibrator Correlation tab, then click Proceed with Correlation.
4. Connect the USB or Thunderbolt™ cable to your display, then click Next.
5. Connect the calibrator to your display and select your calibrator type, then click Next. NOTE: If the calibrator you are using is not listed in the Calibrator Type drop down menu, select Other Calibrators, and upload the CSV file with the calibrator’s patterns and values. Follow the onscreen instructions, then skip to step 8 to continue.
6. Click Start to proceed.
7. 36 Place the calibrator in the indicated area, then click Start.
8. The embedded calibrator will then automatically move into place. Click Start to begin the process.
9. 38 A popup window will appear when the process is completed. Click OK to finish the process.
