PA348CGV Series LCD Monitor User Guide
First Edition March 2022 Copyright © 2022 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Contents....................................................................................................... iii Notices.......................................................................................................... iv TCO certified................................................................................................ vi Safety information...................................................................................... vii Care & Cleaning.................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
ENERGY STAR complied product ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 10 and 30 minutes of user inactivity.
TCO certified A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
AEEE yönetmeliğine uygundur Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
x
1.1 Welcome! Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a broader, brighter and crystal-clear display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! 1.
1.3 Monitor introduction 1.3.1 Front view 1 1. 3 4 5 6 7 Power button/power indicator • Turns the monitor on/off. • The color definition of the power indicator is as the below table. • 2. Status Description White Amber Off On Standby mode Off Press this button to display the OSD menu when the OSD is off. Preset button: • • 3. Press this button to display the OSD menu when the OSD is off. Selects the ProArt Preset Modes.
5. Shortcut 1 • Press this button to display the OSD menu when the OSD is off. • Default: Brightness hotkey • To change the hotkey function, go to the Shortcut > Shortcut 1 menu. 6. Exit button: • Press his button to display the OSD menu when the OSD is off. • Exits the OSD menu. • Press this button to display the OSD menu when the OSD is off. Press this button again to enter the OSD main menu. • Enacts the selected OSD menu items.
1.3.2 Back view 10 1 2 3 4 5 6 7 8 9 10 10 1. Kensington lock slot. 2. Power switch. Press the switch to turn on/off power. 3. AC-IN port. This port connects the power cord. 4. Earphone jack. This port is only available when an HDMI/DisplayPort/USB Type-C cable is connected. HDMI-1 port. This port is for connection with an HDMI compatible device. 5. 6. HDMI-2 port. This port is for connection with an HDMI compatible device. 7. DisplayPort in.
2.1 Assembling the monitor arm/base To assemble the monitor base: 1. Have the front of the monitor face down on a table. 2. Attach the arm into the monitor. 3. Attach the base into the arm, making sure the tab on the arm fits into the groove on the base. 4. Fix the base to the arm by fastening the bundled screw. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. 3 2 1 Base screw size: M6 x 16.2 mm.
2.2 Using the C-Clamp (optional) The C-Clamp attaches the monitor to surfaces up to 10 cm thick. Before starting, make sure you have enough room to fit the entire clamp and the surface is sturdy and flat. Follow the illustrations below to mount the monitor. 2 1 3 1 1 5cm m 7 .5 c 10cm 2 2 4 5 6 2 1 2 We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
2.3 Detaching the arm/base (for VESA wall mount) The detachable arm/base of this monitor is specially designed for VESA wall mount. To detach the arm/base: 1. Have the front of the monitor face down on a table. 2. Press the release button, and then detach the arm/base from the monitor. 2 1 We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. • The VESA wall mount kit (100 x 100 mm) is purchased separately.
2.4 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • You can adjust the monitor’s angle from +23˚ to -5˚and it allows 30˚ swivel adjustment from either left or right. You can also adjust the monitor’s height within +/- 115 mm.
2.5 Connecting the cables Connect the cables as the following instructions: For service only • To connect the power cord: Connect one end of the power cord securely to the monitor’s AC input port, the other end to a power outlet. • To connect the DisplayPort/HDMI/USB Type-C* cable: a. Plug one end of the DisplayPort/HDMI/USB Type-C* cable to the monitor’s DisplayPort/HDMI/USB Type-C jack. b.
2.6 Turning on the monitor Press the power button . See page 1-2 for the location of the power button. The power indicator lights up in white to show that the monitor is ON.
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure PA348CGV 3440x1440 120Hz Preset Blue Light Palette Image Preset Standard Mode Signal DisplayPort Brightness 100 Standard Mode sRGB Mode Rec 709 Mode DCI-P3 Mode HDR Scenery Mode Reading Mode Rapid Rendering Mode Sound Back Enter Exit 1. Press any button to display the OSD menu. 2. Press the 3. Move the Menu (5-way) button up/down/left/right to navigate through the functions.
3.1.2 1. OSD function introduction Preset This function contains 10 sub-functions you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode.
• User Mode 1/User Mode 2: More items are adjustable in the OSD menu. Below table shows the default configurations for each Preset mode: Function Standard sRGB Mode Mode Rec. 709 DCI-P3 Mode Mode HDR Scenery Reading Mode Mode P3-Theater (D65 & P3 Fixed Enable Theater 6500K (6500K) only) Color Temp.
2. Blue Light In this function, you can adjust the blue light filter level. PA348CGV 3440x1440 120Hz Signal DisplayPort Brightness 100 Level 0 Preset Level 1 Blue Light Palette Preset Standard Mode Level 2 Level 3 Level 4 Image Sound Back Enter Exit • Level 0: No change. • Level 1~4: The higher the level, the less blue light is scattered. When Blue Light is activated,the default settings of Standard Mode will be automatically imported.
3. Palette Set a desired color setting from this menu. Preset Standard Mode PA348CGV 3440x1440 120Hz Brightness Preset Blue Light Palette Image Signal DisplayPort Brightness 100 100 Contrast 80 Saturation 50 Hue 50 Color Temp. Gamma Black Level Color Sound Back Enter Exit • Brightness: The adjusting range is from 0 to 100. • Contrast: The adjusting range is from 0 to 100. • Saturation: The adjusting range is from 0 to 100. • Hue: Shifts the image color between green and purple.
4. Image Set the image related setting from this menu. Preset Standard Mode PA348CGV 3440x1440 120Hz Preset Blue Light Sharpness 0 Trace Free 60 Signal DisplayPort Brightness 100 Aspect Control Input Range Palette Image Sound Back Enter Exit • Sharpness: The adjusting range is from 0 to 100. • Trace Free: Adjusts the response time of the monitor. • Aspect Control: Adjusts the aspect ratio to Full, 4:3, 1:1, 16:9, 16:10 or OverScan.
5. Sound You can adjust Volume, Mute and Source from this menu. Preset Standard Mode PA348CGV 3440x1440 120Hz Preset Blue Light Volume Signal DisplayPort Brightness 100 90 Mute Source Palette Image Sound Back 6. Enter Exit • Volume: The adjusting range is from 0 to 100. • Mute: Toggles the monitor sound between on and off. • Source: Decides the monitor sound comes from which source.
• PIP/PBP Mode: Selects PIP, PBP function, or turn it off. To scale both displays to full screen in PBP mode, set resolution settings for both as 1720 x 1440 in OS display settings. (And make sure that the scaling option is "Maintain Display Scaling" if you are using an Intel graphic card.) • PIP/PBP Source: Selects the video input source from among HDMI-1, HDMI-2, DisplayPort and USB Type C. The table below shows the input source combinations. Main-window Sub-window • 7.
• 8. Ruler: This pattern presents physical ruler on top and left side. You can press the Menu (5-way) button for longer than 3 seconds to switch the measurements between metric and imperial. Signal In this function, you can select your desired input source.
* FreeSync Premium Pro can only be activated within 48Hz~120Hz (DisplayPort, USB Type C). VRR can only be activated within 48Hz ~100Hz (HDMI). * For supported GPUs, minimum PC system and driver requirements, please contact the GPU manufactures. To activate this function, you need to do the following: turn off PIP/PBP, set Aspect Control to Full, set DisplayPort Stream to DisplayPort 1.2 or DisplayPort 1.4.
• Key Lock: To disable all function keys. Push the 5-way button down for over 5 seconds to cancel the key lock function. • Power Indicator: Turns the power LED indicator on/off. • Language: There are 22 languages for your selection, including English, French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech, Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian, Ukrainian.
3.2 Specifications summary Panel Type Panel size TFT LCD 34” (21:9, 86.36 cm) wide screen Max. Resolution Pixel pitch Brightness (Typ.) Contrast Ratio (Typ.) Viewing angle (H/V) CR>10 Display colors Response time ProArt Preset selection Auto adjustment Color temperature selection Analog input Digital input Temperature (Operating) 3440 x 1440 0.2325 mm x 0.2325 mm 350 cd/m2 (SDR), 400 cd/m2 (HDR) 1000:1 178˚/178˚ 1.
Multi-languages Accessories Compliance and Standards 22 languages (English, French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech, Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian, Ukrainian) Quick start guide, warranty card, power cord, HDMI cable (optional), DisplayPort cable (optional), USB C to A cable (optional), USB C to C cable (optional), C-Clamp (optional), color calibration testing report, ProArt w
5° Swivel: +/-30 Degree 22.55 [0.89] 68.99 [2.72] 245.00 [9.65] 30° 200.76 [7.90] ASUS PA348CGV Outline Dimension *Unit: mm(inch) 23° 817.60 [32.19] 799.8 (31.49)-Active-Area 71.96 [2.83] 62.10 [2.44] 115.00 [4.53] 277.66 [10.93] 30° 8.90 [0.35] 334.8 (13.18)-Active-Area Tilt: -5~23 Degree 399.90 [15.74] 336.50 [13.25] 12.15 [0.48] 368.20 [14.50] 200.76 [7.90] 8.90 [0.35] 167.40 [6.59] 50.00 [1.97] 100.00 [3.
3.4 Troubleshooting (FAQ) Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. • Check if the power switch is ON. The power LED lights amber and there is • Check if the monitor and the computer are no screen image in the ON mode. • Make sure the signal cable is properly connected the monitor and the computer.
3.5 Resolution Frequency Supported operating modes 640 x 480 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 720 1280 x 800 1280 x 960 1280 x 1024 1440 x 900 1600 x 1200 1680 x 1050 1920 x 1080 2560 x 1440 3440 x 1440 3440 x 1440 (DP only) 1720 x 1440 3440 x 1440 (DP only) 3440 x 1440 3440 x 1440 (DP only) Horizontal Frequency (KHz) 31.47(N) 37.87(N) 37.5(N) 31.47(N) 35.16(P) 37.88(P) 48.08(P) 46.86(P) 49.72(P/N) 48.
Resolution 1920 × 1080p 1280 × 720p 720 × 576p 720 × 480p 640 × 480p ASUS PA348CGV Series LCD Monitor Vertical Frequency (Hz) 50Hz 60Hz 50Hz 59.94Hz 60Hz 50Hz 59.
