PA34VCNV Series LCD Monitor User Guide
First Edition July 2023 Copyright © 2023 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Contents....................................................................................................... iii Notices.......................................................................................................... iv TCO certified................................................................................................ vi Safety information...................................................................................... vii Care & Cleaning.................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
ENERGY STAR complied product ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 10 and 30 minutes of user inactivity.
TCO certified A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Prevent Tipping When using the display, fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. 1 M4 or M6 screw Cord 2 Cord or chain viii • Display design may differ from those illustrated. • Installing must be done by a qualified technician, and please contact your supplier for more information. • For the models with net weight >=7kg. Please select the suitable way to prevent tipping.
AEEE yönetmeliğine uygundur Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package. 3. About Flicker https://www.asus.
1.1 Welcome! Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a broader, brighter and crystal-clear display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! 1.
1.3 Monitor introduction 1.3.1 Front view 1 1. 4 3 5 6 7 Power button/power indicator • Turns the monitor on. • Turns the monitor off by pressing the button for over 0.6 seconds. • The color definition of the power indicator is as the below table. • 2. Status Description White Amber Off On Standby mode Off Press this button to display the OSD menu when the OSD is off. QuickFit Plus button: • Press this button to display the OSD menu when the OSD is off.
• 5. To change the hotkey function, go to the Shortcut > Shortcut 2 menu. Shortcut 1 • Press this button to display the OSD menu when the OSD is off. • Default: Energy Saving hotkey • To change the hotkey function, go to the Shortcut > Shortcut 1 menu. 6. Exit button: • Press his button to display the OSD menu when the OSD is off. • Exits the OSD menu. • Press this button to display the OSD menu when the OSD is off. Press this button again to enter the OSD main menu.
6. HDMI-2 port. This port is for connection with an HDMI compatible device. 7. DisplayPort in. This port is for connection with a DisplayPort compatible device. 8. Daisy-Chain DisplayPort output. This port allows you to connect multiple DisplayPort compatible monitors. 9. USB 3.2 Gen 1 Type-C (supports DP Alt mode). This port is for connection with a DisplayPort/USB Type-C compatible device. This port is also for connection with a USB Type-C cable, which supports USB power and data delivery.
2.1 Assembling the monitor arm/base To assemble the monitor base: 1. Have the front of the monitor face down on a table. 2. Attach the arm into the monitor. 3. Attach the base into the arm, making sure the tab on the arm fits into the groove on the base. 4. Fix the base to the arm by fastening the bundled screw. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. Click 1 2 3 Base screw size: M6 x 16.2 mm.
2.2 Detaching the arm/base (for VESA wall mount) The detachable arm/base of this monitor is specially designed for VESA wall mount. To detach the arm/base: 1. Have the front of the monitor face down on a table. 2. Press the release button, and then detach the arm/base from the monitor. 2 1 We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. • The VESA wall mount kit (100 x 100 mm) is purchased separately.
2.3 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • You can adjust the monitor’s angle from +23˚ to -5˚and it allows 15˚ swivel adjustment from either left or right. You can also adjust the monitor’s height within 130 mm.
2.4 Connecting the cables Connect the cables as the following instructions: • To connect the power cord: Connect one end of the power cord securely to the monitor’s AC input port, the other end to a power outlet. • To connect the DisplayPort/HDMI/USB Type-C* cable: a. Plug one end of the DisplayPort/HDMI/USB Type-C* cable to the monitor’s DisplayPort/HDMI/USB Type-C jack. b. Connect the other end of the DisplayPort/HDMI/USB Type-C* cable to your computer's DisplayPort/HDMI/USB Type-C jack.
If you need to replace the power cord or the connection cable(s), please contact ASUS customer service. 2.5 Turning on the monitor Press the power button . See page 1-2 for the location of the power button. The power indicator lights up in white to show that the monitor is ON.
2-6 Chapter 2: Setup
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure PA34VCNV 3440x1440 Preset Palette Image PIP/PBP HDR OFF 60Hz Preset Native Mode Input DisplayPort Brightness 50 Native Mode sRGB Mode DCI-P3 Mode DICOM mode Rec 709 Mode HDR User Mode1 User Mode2 QuickFit Plus Volume50 Back Enter Exit 1. Press any button to display the OSD menu. 2. Press the 3. Move the Menu (5-way) button up/down/left/right to navigate through the functions.
3.1.2 1. OSD function introduction Preset This function contains 8 sub-functions you can select for your preference. PA34VCNV 3440x1440 Preset Palette Image PIP/PBP HDR OFF 60Hz Preset Native Mode Input DisplayPort Brightness 50 Native Mode sRGB Mode DCI-P3 Mode DICOM mode Rec 709 Mode HDR User Mode1 User Mode2 QuickFit Plus Volume50 • Back Enter Exit Native Mode: Best choice for document editing. Native Mode meets Energy Star® requirements.
Below table shows the default configurations for each Preset mode: Function Color Temp. Native Mode 6500K Brightness 50 Contrast 80 Sharpness Saturation Hue Enable (0) Middle (50) Middle (50) sRGB Mode Fixed 6500K Fixed 80 nits Rec. 709 Mode DCI-P3 Mode DICOM Mode HDR Fixed 6500K 250 nits/ Max.
2. Palette Set a desired color setting from this menu. PA34VCNV 3440x1440 Preset Palette HDR OFF 60Hz Preset Native Mode Brightness 50 Contrast 80 Saturation 50 Hue 50 Input DisplayPort Brightness 50 Color Temp. Image Gamma PIP/PBP RGB Tuning Black Level QuickFit Plus Volume50 Enter Exit • Brightness: The adjusting range is from 0 to 100. • Contrast: The adjusting range is from 0 to 100. • Saturation: The adjusting range is from 0 to 100.
3. Image Set the image related setting from this menu. PA34VCNV 3440x1440 Preset HDR OFF 60Hz Preset Native Mode Sharpness 0 Trace Free 60 Input DisplayPort Brightness 50 Aspect Control Palette Input Range Blue Light Filter Image PIP/PBP QuickFit Plus Volume50 Back Enter Exit • Sharpness: The adjusting range is from 0 to 100. • Trace Free: Adjusts the response time of the monitor. • Aspect Control: Adjusts the aspect ratio to Full, Dot to Dot, or 1:1 Ratio.
This monitor is a low blue light backlight monitor, it would decrease the blue light emitted from the monitor without adjusting the Blue Light Filter function via the OSD menu. The default setting Native Mode has been tested by TÜV Rheinland and meets the requirements of TÜV Rheinland's "Low Blue Light (Hardware Solution)" standard. Please refer to the following to alleviate eye strains: 3-6 • Users should take some time away from the display if working for long hours.
4. PIP/PBP The PIP/PBP menu allows you to open up another sub-window connected from another video source (when input source is below 60Hz) besides the main-window from your original video source. PA34VCNV 3440x1440 Preset Palette HDR OFF 60Hz Preset Native Mode Input DisplayPort Brightness 50 Mode Source Color setting PIP Size Image PIP/PBP QuickFit Plus Volume50 • Back Enter Exit PIP/PBP Mode: Selects PIP, PBP function, or turn it off.
5. QuickFit Plus In this function, you can use different kinds of alignment patterns. PA34VCNV 3440x1440 Preset Palette Image HDR OFF 60Hz Preset Native Mode Input DisplayPort Brightness 50 Safe Area Center Marker Mirror Mode Customization Ruler PIP/PBP QuickFit Plus Volume50 3-8 Back Enter Exit • Safe Area: Facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel. The selections are: 1:1, Action Safe, Title Safe, 3 x 3.
6. Input In this function, you can select your desired input source or decide if you want the monitor to automatically search for input sources. PA34VCNV 3440x1440 Input Settings Shortcut HDR OFF 60Hz Preset Native Mode Input DisplayPort Brightness 50 HDMI 1 HDMI 2 DisplayPort USB Type-C Auto Detection Volume50 Back Enter Exit Press the Menu (5-way) button twice within 1 second to display current input signal.
• • 3-10 OSD Setup: * Adjusts the OSD timeout from 10 to 120 seconds. * Enables or disables the DDC/CI function. * Adjusts the OSD background from opaque to transparent. Sound: * Volume: The adjusting range is from 0 to 100. * Mute: Toggles the monitor sound between on and off. * Source: Decides the monitor sound comes from which source. • DisplayPort Stream: Compatibility with graphic card. Select DisplayPort 1.2, DisplayPort 1.4 or DisplayPort 1.4 USB3.2 by graphic card DP version.
8. Shortcut Defines the functions for Shortcut 1 and 2 buttons. PA34VCNV 3440x1440 Input HDR OFF 60Hz Preset Native Mode Input DisplayPort Brightness 50 Shortcut 1 Shortcut 2 Settings Shortcut Volume50 • Back Enter Exit Shortcut 1/Shortcut 2: Selects a function for Shortcut 1 and 2 buttons. When a certain function is selected or activated, your shortcut key may not support. Available function choices for shortcut: Blue Light Filter, Brightness, HDR, Contrast, PIP/PBP, Color Temp.
3.2 Specifications summary Panel Type Panel size TFT LCD 34.1” (86.71 cm) curve screen Max. Resolution Pixel pitch Brightness (Typ.) Contrast Ratio (Typ.) Viewing angle (H/V) CR>10 Display colors Response time ProArt Preset selection Auto adjustment Color temperature selection Analog input Digital input Temperature (Operating) 3440 x 1440 0.2325 mm x 0.2325 mm 300 cd/m2 (SDR) 1000:1 178˚/178˚ 1073.7 M 5 ms (grey to grey) 8 color preset modes No 5 color temperatures No DisplayPort v1.4, HDMI 2.
Weight (Esti.) Multi-languages Accessories Compliance and Standards 10.8 kg (Net); 7.8 kg (Net, without stand); 16.
ASUS PA34VCNV Outline Dimension *Unit: mm(inch) Tilt: -5~23 Degree Swivel: +/-15 Degree Wall mount Keep out area M4*4-Depth 10 mm Chapter 3: OSD (On-Screen Display) menu 3-14 Outline dimensions 3.
3.4 Troubleshooting (FAQ) Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. • Check if the power switch is ON. The power LED lights amber and there is • Check if the monitor and the computer are no screen image in the ON mode. • Make sure the signal cable is properly connected the monitor and the computer.
3.
