User Guide
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-5ASUS PA34VCNV Series LCD Monitor
3. Image
Set the image related setting from this menu.
0
60
PA34VCNV HDR OFF
3440x1440 60Hz
Preset
Native Mode
Input
DisplayPort
Brightness
50
ExitBackVolume50 Enter
Preset
Palette
Image
PIP/PBP
QuickFit Plus
Sharpness
Trace Free
Aspect Control
Input Range
Blue Light Filter
• Sharpness: The adjusting range is from 0 to 100.
• Trace Free: Adjusts the response time of the monitor.
• Aspect Control: Adjusts the aspect ratio to Full, Dot to Dot, or 1:1
Ratio.
To activate this function, you need to do the following: turn off PBP and disable
HDR on your device.
• Input Range: To map signal range with whole black to white presented
range of display.
• Blue Light Filter: In this function, you can adjust the blue light filter from
0 to Max.
* 0: No change.
* Max: The higher the level, the less blue light is scattered. When
blue light filter is activated, the default settings of Native Mode
will be automatically imported. Besides maximum level, the
brightness is user-configurable. Maximum is the optimized setting.
It is in compliance with TUV low blue light certification*. The
brightness function is not user configurable.
*When color augmentation is in default value (50).