User Guide
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-9ASUS PA34VCNV Series LCD Monitor
6. Input
In this function, you can select your desired input source or decide if you
want the monitor to automatically search for input sources.
Input
Settings
Shortcut
HDMI 1
HDMI 2
DisplayPort
USB Type-C
Auto Detection
PA34VCNV HDR OFF
3440x1440 60Hz
Preset
Native Mode
Input
DisplayPort
Brightness
50
ExitBackVolume50 Enter
Press the Menu (5-way) button twice within 1 second to display current input
signal. When the input signal message appears, you can switch to the next
existed input source by quickly double tapping on this button.
7. Settings
Allows you to adjust the system.
Power Saving
OSD Setup
Sound
DisplayPort Stream
Key Lock
Power Indicator
Language
Information
Input
Settings
Shortcut
PA34VCNV HDR OFF
3440x1440 60Hz
Preset
Native Mode
Input
DisplayPort
Brightness
50
ExitBackVolume50 Enter
• Power Saving: Select Normal Level for power on hub during power
saving. Select Deep Level for power off hub during power saving.
Normal Level : DP MST mode (DisplayPort 1.2, DisplayPort 1.4)
Deep Level: DP SST mode. Note : Fixed input port when DPTX cable is
detected.