User Guide
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
viii
Prevent Tipping
When using the display, fasten the LCD to a wall using a cord or chain that
can support the weight of the monitor in order to prevent the monitor from
falling.
1
2
Cord
M4 or M6 screw
Cord or chain
• Display design may differ from those illustrated.
• Installing must be done by a qualied technician, and please contact
your supplier for more information.
• For the models with net weight >=7kg. Please select the suitable
way to prevent tipping.
• For the models with VESA mount, please use method
1
, install
the screws with ring to the VESA mount hole, then tie the cord or
chain to the wall. Otherwise, please use method
2
to tie the cord
or chain to the stand and then x it to the wall.