User Manual

20
PRIME/PRO/ProArt/TUF GAMING Intel 400 系列 BIOS 使用手冊
Primary Timings
DRAM CAS# Latency
設定值有：[Auto] [1] - [31]
DRAM RAS# to CAS# Delay
設定值有：[Auto] [1] - [63]
DRAM RAS# ACT Time
設定值有：[Auto] [1] - [63]
DRAM Command Rate
設定值有：[Auto] [1N] [2N] [3N] [N:1]
以下項目當 DRAM Command Rate 設定為 [N:1] 時才會出現。
N to 1 ratio
每個有效命令周期之間的數值。
設定值有：[4] - [7]
Secondary Timings
DRAM RAS# to RAS# Delay L
設定值有：[Auto] [1] - [15]
DRAM RAS# to RAS# Delay S
設定值有：[Auto] [1] - [15]
DRAM REF Cycle Time
設定值有：[Auto] [1] - [1023]
DRAM REF Cycle Time 2
設定值有：[Auto] [1] - [1023]
DRAM REF Cycle Time 4
設定值有：[Auto] [1] - [1023]
DRAM Refresh Interval
設定值有：[Auto] [1] - [65535]
DRAM WRITE Recovery Time
設定值有：[Auto] [1] - [31]
DRAM READ to PRE Time
設定值有：[Auto] [1] - [15]
DRAM FOUR ACT WIN Time
設定值有：[Auto] [1] - [63]
DRAM WRITE to READ Delay
設定值有：[Auto] [1] - [15]
DRAM WRITE to READ Delay L
設定值有：[Auto] [1] - [15]