User Manual

PRIME/PRO/ProArt/TUF GAMING Intel 400 系列 BIOS 使用手冊
25
Read Timing Centering 2D
設定值有：[Enabled] [Disabled]
Command Voltage Centering
設定值有：[Enabled] [Disabled]
Write Voltage Centering 2D
設定值有：[Enabled] [Disabled]
Read Voltage Centering 2D
設定值有：[Auto] [Enabled] [Disabled]
Late Command Training
設定值有：[Auto] [Enabled] [Disabled]
Round Trip Latency
設定值有：[Auto] [Enabled] [Disabled]
Turn Around Timing Training
設定值有：[Enabled] [Disabled]
Rank Margin Tool
設定值有：[Auto] [Enabled] [Disabled]
Margin Check Limit
Checks Margin to Limit to see if next boot memory needs to be
retrained.
設定值有：[Disabled] [L1] [L2] [Both]
以下項目當 Margin Check Limit 設定為 [L2] 或 [Both] 時才會出現。
Margin Limit Check L2
L2 check threshold is scale of L1 check.
設定值有：[1] - [300]
Memory Test
設定值有：[Enabled] [Disabled]
DIMM SPD Alias Test
設定值有：[Enabled] [Disabled]
Receive Enable Centering 1D
設定值有：[Enabled] [Disabled]
Retrain Margin Check
設定值有：[Enabled] [Disabled]
Retrain Margin Check
設定值有：[Enabled] [Disabled]
Retrain Margin Check
設定值有：[Enabled] [Disabled]
CMD Drive Strength and Tx Equalization
設定值有：[Auto] [Enabled] [Disabled]
CMD Slew Rate Training
設定值有：[Auto] [Enabled] [Disabled]