User Guide

16
E
Turning on the power
1. Press the POWER button.
Press
POWER button
Power LED
The power LED turns on.
2. Turn on the PC.
The screen appears.
Status Status of the monitor
Green lit Signal input
Orange lit No signal input
Alternately ashing red and
green
Abnormal temperature
Caution
• When switching the POWER button off and back on,
always wait for an interval of at least 5 seconds. Rapid
switching may lead to errors or malfunctions.
• High temperatures inside the unit are indicated when the
Power LED is alternately ashing red and green, and may
lead to the power turning off automatically. (See page 26.)
• For a complete electrical disconnection, pull out the main
plug.
n
Operation Mode
When the monitor is turned on for the rst time after being
shipped from the factory, the operation mode setting screen
will be displayed. Set it to ECO Mode or Normal Mode.
ECO Mode - If there is no operation for 4 hours or more, the
monitor automatically turns off the power.
Normal Mode - Will perform standard operation.
Even after being set, changes can be made using [Operation
Mode], located in the menu of the monitor.
Turning Power On/Off
Turning off the power
1. Turn off the PC.
2. Depress the POWER button for around 2 seconds.
Depress for around
2 seconds
POWER button
The power LED turns off.
Caution
• If the monitor will not be used for a long time, disconnect
the power plug from the power outlet.