User Manual

3-17
Chapter 3: BIOS setup
USB7-9
Allows you to enable or disable USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Conguration options: [Disabled] [Enabled]
U32G1_10, USB_10-13
Allows you to enable or disable USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Conguration options: [Disabled] [Enabled]
3.3.17 NVMeConguration
This menu displays the NVMe controller and drive information of the connected
devices.
3.3.18 HDD Secure Erase
This menu displays the HDD that supports Secure Erase function.
3.3.19 Dynamic Digital IO
The items listed in this screen congure Digital IO settings.
DIO 0~7 Direction
Conguration options: [Input] [Output]
The following item appears only when you set DIO 0~7 to [Output].
Output Level [H]
Conguration options: [H] [L]
3.3.20 NetworkStackConguration
Network Stack
This item allows user to disable or enable the UEFI network stack. Conguration
options: [Disabled] [Enabled]
The following two items appear only when you set the previous item to
[Enabled].
Ipv4 PXE Support
This item allows user to disable or enable the Ipv4 PXE Boot support.
Conguration options: [Disabled] [Enabled]
Ipv6 PXE Support
This item allows user to disable or enable the Ipv6 PXE Boot support.
Conguration options: [Disabled] [Enabled]