User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 Start ASUS EzFlash
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 Platform Misc Configuration
- 3.3.5 CPU Configuration
- 3.3.6 System Agent (SA) Configuration
- 3.3.7 PCH Storage Configuration
- 3.3.8 Onboard Devices Configuration
- 3.3.9 ACPI Settings
- 3.3.10 LVDS Configuration
- 3.3.11 APM Configuration
- 3.3.12 NCT6116D Super IO Configuration
- 3.3.13 NCT6116D HW Monitor
- 3.3.14 Serial Port Console Redirection
- 3.3.15 Intel TXT Information
- 3.3.16 USB Configuration
- 3.3.17 NVMe Configuration
- 3.3.18 HDD Secure Erase
- 3.3.19 Dynamic Digital IO
- 3.3.20 Network Stack Configuration
- 3.4 Security menu
- 3.5 Boot menu
- 3.6 Save & Exit menu
- 3.7 Event Logs
- BIOS setup
- Appendix
3-20
Q370I-IM-A R3.0
NVMe Support
This item allows you to enable or disable NVMe Support. Conguration options:
[Disabled] [Enabled]
VGA Support
[Auto] Only installs the Legacy OpRom with Legacy OS and logo will not be
shown during POST.
[EFI Driver] EFI driver will still be installed with the EFI OS.
USB Support
[Disabled] All USB devices will NOT be available until after OS boot.
[Full Initial] All USB devices will be available in OS and POST.
[Partial Initial] USB Mass Storage and specic USB port/device will NOT be available
before OS boot.
Network Stack Driver Support
[Disabled] Network Stack Driver will be skipped.
[Enabled] Network Stack Driver will not be skipped.
Redirection Support
Allows you to enable or disable the Redirection function.
Conguration options: [Disabled] [Enabled]
Setup Prompt Timeout
Allows you to set the number of seconds to wait for setup activation key.
65535(0xFFFF) means indenite waiting.
Conguration options: [1] - [65535]
Boot up NumLock State
[On] Set the power-on state of the NumLock to [On].
[Off] Set the power-on state of the NumLock to [Off].
Chassis Intrusion Detection
Allows you to enable or disable the chassis intrusion detection function.
Conguration options: [Disabled] [Enabled]
Wait For ‘F1’ If Error
When this item is set to [Enabled], the system waits for the F1 key to be pressed
when error occurs.
Conguration options: [Disabled] [Enabled]