User's Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Ai Tweaker menu
- 3.3.1 CPU Power Enhancement
- 3.3.2 CPU Core Ratio
- 3.3.3 DRAM Odd Ratio Mode
- 3.3.4 DRAM Frequency
- 3.3.5 Power-saving & Performance Mode
- 3.3.6 DRAM Timing Control
- 3.3.7 DIGI+ VRM
- 3.3.8 Internal CPU Power Management
- 3.3.9 CPU Core/Cache Current Limit Max.
- 3.3.10 CPU Graphics Current Limit
- 3.3.11 Min. CPU Cache Ratio
- 3.3.12 Max. CPU Cache Ratio
- 3.3.13 Max. CPU Graphics Ratio
- 3.3.14 DRAM Voltage
- 3.3.15 DRAM REF Voltage Control
- 3.4 Advanced menu
- 3.4.1 Platform Misc Configuration
- 3.4.2 CPU Configuration
- 3.4.3 System Agent (SA) Configuration
- 3.4.4 PCH Configuration
- 3.4.5 PCH Storage Configuration
- 3.4.6 PCH-FW Configuration
- 3.4.7 AMT Configuration
- 3.4.8 Trusted Computing
- 3.4.9 Onboard Devices Configuration
- 3.4.10 APM Configuration
- 3.4.11 Serial Port Console Redirection
- 3.4.12 Intel TXT Information
- 3.4.13 PCI Subsystem Settings
- 3.4.14 USB Configuration
- 3.4.15 Network Stack Configuration
- 3.4.16 NVMe Configuration
- 3.4.17 HDD Secure Erase
- 3.4.18 HDD/SSD SMART Information
- 3.5 Monitor menu
- 3.6 Boot menu
- 3.7 Tool menu
- 3.8 Exit menu
- BIOS setup
- Appendix
3-30
Q370M-IM-A
3.5 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you
to change the fan settings.
CPU / MotherBoard Temperature
The onboard hardware monitor automatically detects and displays the CPU/
motherboard temperatures. Select Ignore if you do not wish to display the
detected temperature.
CPU / Chassis Fan1/2 Speed
The onboard hardware monitor automatically detects and displays the CPU /
chassis fan speeds in rotations per minute (RPM). If the fan is not connected to the
motherboard, the eld shows N/A. Select Ignore if you do not wish to display the
detected speed.
CPU Core Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators. Select Ignore if you do not want to detect this item.
Q-Fan Configuration
Q-Fan Tuning
Click [OK] button to detect the lowest speed and congure the minimum duty circle
for each fan. Do not shut down or reset your system during the tuning progress.
Conguration options: [Ok] [Cancel]
CPU Q-Fan Control
[Disabled] Disables the CPU Q-Fan control feature.
[PWM Mode] Enable the CPU Q-Fan control in PWM mode for 4-pin CPU fan.
The following items appear only when you set CPU Q-Fan Control to [PWM
Mode].
CPU Fan Step Up
This item allows you to set the value of the CPU fan step up.
Conguration options: [0 sec] [2.1 sec] [2.8 sec] [3.6 sec] [4.2 sec] [5.0 sec] [6.3
sec] [8.5 sec] [12 sec] [25 sec]
CPU Fan Step Down
This item allows you to set the value of the CPU fan step down.
Conguration options: [0 sec] [2.1 sec] [2.8 sec] [3.6 sec] [4.2 sec] [5.0 sec] [6.3
sec] [8.5 sec] [12 sec] [25 sec]