User's Manual

3-23
Chapter 3: BIOS setup
SATA Controller(s)
Enables or disables onboard the SATA device. Conguration options: [Disabled]
[Enabled]
The following items appear only when you set SATA Controller(s) to [Enabled].
SATA Mode Selection
Determines how SATA controller(s) operate. This PCH SKU does not support RST feature.
Conguration options: [AHCI] [Intel RST Premium with Intel Optane System
Acceleration (RAID)]
Aggressive LPM Support
This item is designed for LPM (link power management) support with a better
energy saving conditions. When disabled, the hot plug function of SATA ports are
disabled. Conguration options: [Disabled] [Enabled]
Smart Self Test
This item allows you to enable or disable the SMART Self Test on all HDDs during
POST. Conguration options: [Disabled] [Enabled]
SATA6G_1~6(Gray)
Allow you to enable/disable the SATA6G_1~6 port. Conguration options:
[Disabled] [Enabled]
SATA6G_1~6 Hot Plug
These items allow you to enable/disable SATA Hot Plug Support. Conguration
options: [Disabled] [Enabled]
3.4.6 PCH-FWConguration
TPM Device Selection
This item allows you to select the TPM device. Conguration options: [Discrete
TPM] [Firmware TPM]
3.4.7 AMTConguration
End of Post Message
This item allows you to enable or disable End of Post Message sent to ME.
Conguration options: [Disabled] [Send in DXE]
USB Provisioning of AMT
This item allows you to enable or disable AMT USB Provisioning. Conguration
options: [Enabled] [Disabled]