User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 Power Management
- 3.3.7 PCI Express Configuration
- 3.3.8 AMT Configuration
- 3.3.9 Super IO Configuration
- 3.3.10 Serial Console Redirection
- 3.3.11 SATA Configuration
- 3.3.12 VMD setup menu
- 3.3.13 Network Stack Configuration
- 3.3.14 USB Configuration
- 3.3.15 NVMe Configuration
- 3.3.16 Onboard Devices Configuration
- 3.3.17 Miscellaneous
- 3.3.18 APM Configuration
- 3.3.19 EZ-Flash
- 3.3.20 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-3
Chapter 3: BIOS setup
• Be cautious when selecting AiO chassis. Incorrect selection of AiO chassis
can cause incorrect operation or potential damage to AiO chassis hardware.
• The following items appear only when you set All-in-One Chassis to [None].
EDID Data Source
Configuration options: [Pre-Defined] [Flat Panel Display]
The following item appears when you set EDID Data Source to [Pre-Defined].
LFP Panel Type
Allows you to select LFP panel used by Internal Graphics Device.
Configuration options: [VBIOS Default] [640x480] [800x600] [1024x768]
[1280x1024] [1400x1050 LVDS1] [1400x1050 LVDS2] [1600x1200]
[1366x768] [1680x1050] [1920x1200] [1440x900] [1600x900] [1024x768]
[1280x800] [1920x1080] [2048x1536]
Inverter Polarity
Configuration options: [Normal] [Inverted]
Channel Select
Configuration options: [Dual Channel] [Single Channel]
Mode Select
Confuguration options: [JEIDA] [VESA 6bit] [VESA 8bit] [VESA 10bit]
DIGON enable to LVDS_ON enable(T2)
Configuration options: [0] ~[50]
LVDS_ON enable to BLON enable (T3)
Configuration options: [0] ~[1023]
BLON disable to LVDS_ON disable (T4)
Configuration options: [0] ~[1023]
LVDS_ON disable to DIGON disbale (T5)
Configuration options: [0] ~[50]
Completion of power down to power up (T7)
Configuration options: [0] ~[1023]
VARY_BL enable to BL_EN enable (T9)
Configuration options: [0] ~[1023]
BL_EN disable to VARY_BL disable (T10)
Configuration options: [0] ~[1023]