User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 Power Management
- 3.3.7 PCI Express Configuration
- 3.3.8 AMT Configuration
- 3.3.9 Super IO Configuration
- 3.3.10 Serial Console Redirection
- 3.3.11 SATA Configuration
- 3.3.12 VMD setup menu
- 3.3.13 Network Stack Configuration
- 3.3.14 USB Configuration
- 3.3.15 NVMe Configuration
- 3.3.16 Onboard Devices Configuration
- 3.3.17 Miscellaneous
- 3.3.18 APM Configuration
- 3.3.19 EZ-Flash
- 3.3.20 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-11
Chapter 3: BIOS setup
Redirect After POST
Conguration options: [Always Enable] [BootLoader]
[Always Enable] Legacy Console Redirection is enabled for Legacy OS.
[BootLoader] Legacy Console Redirection is disabled before booting
to Legacy OS.
3.3.11 SATAConguration
This item allows you to congure SATA device options settings.
SATA Controller(s)
Allows you to enables or disables the onboard SATA device.
Conguration options: [Disabled] [Enabled]
The following item appears only when you set SATA Controller(s) to [Enabled].
SATA Mode Selection
Allows you to determine how SATA controller(s) operate. Conguration options:
[AHCI]
SATA6G_ 1(~4)
Port 1(~4)
Allows you to enable or disable SATA Port.
Conguration options: [Disabled] [Enabled]
Hot Plug
Allows you to designate this port as Hot Pluggable.
Conguration options: [Disabled] [Enabled]
M.2_2
Conguration options: [Disabled] [Enabled]
3.3.12 VMD setup menu
Enable VMD controller
This item allows you to disable or enable VMD controller.
Conguration options: [Disabled] [Enabled]
3.3.13 NetworkStackConguration
Network Stack
This item allows you to disable or enable the UEFI Network Stack.
Conguration options: [Disabled] [Enabled]