User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 Power Management
- 3.3.7 PCI Express Configuration
- 3.3.8 AMT Configuration
- 3.3.9 Super IO Configuration
- 3.3.10 Serial Console Redirection
- 3.3.11 SATA Configuration
- 3.3.12 VMD setup menu
- 3.3.13 Network Stack Configuration
- 3.3.14 USB Configuration
- 3.3.15 NVMe Configuration
- 3.3.16 Onboard Devices Configuration
- 3.3.17 Miscellaneous
- 3.3.18 APM Configuration
- 3.3.19 EZ-Flash
- 3.3.20 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-14
Q670EI-IM-A
3.3.18 APMConguration
This item allows you to congure APM (Advanced Power Management) settings.
ErP Ready
Allows BIOS to switch off some power at S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Conguration options: [Disabled] [Enabled]
Restore AC Power Loss
Allows you to select AC power state when power is re-applied after a power failure.
Conguration options: [S5 State] [S0 State]
Power On By PCIE
Allows you to enable or disable the Wake-on-LAN function of the onboard LAN
controller or other installed PCIe LAN cards.
Conguration options: [Disabled] [Enabled]
Power On By PS2
Conguration options: [Disabled] [Enabled]
Power On By Ring
Conguration options: [Disabled] [Enabled]
Power On By RTC
Conguration options: [Disabled] [Enabled]
The following items appear when you set Power On By RTC to [Single event]
or [Daily event].
Wake up hour
Allows you to enter a natural number within 0-23 for hour. For example, enter
3 for 3:00 am and 15 for 3:00 pm.
Wake up minute
Allows you to enter a natural number within 0-59 for minute.
Wake up second
Allows you to enter a natural number within 0-59 for second.
The following items appear when you set Power On By RTC to [Weekly
event].
Alarm day of Week
Allows you to select the day of the week when the system is to wake up.
Conguration options: [Sunday] [Monday] [Tuesday] [Wednesday] [Thursday]
[Friday] [Saturday]