User Manual
Table Of Contents
- Chapter 1 Product overview
- Chapter 2: Motherboard Information
- Chapter 3: BIOS Setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 Power Management
- 3.3.6 PCI Express Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 VMD setup menu
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 APM Configuration
- 3.3.16 EZ-Flash
- 3.3.17 IO Expander Configuration
- 3.3.18 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
3-13
Chapter 3: BIOS setup
3.3.10 VMD setup menu
Enable VMD controller
This item allows you to disable or enable VMD controller.
Configuration options: [Disabled] [Enabled]
3.3.11 Network Stack Configuration
Network Stack
This item allows you to disable or enable the UEFI Network Stack.
Configuration options: [Disabled] [Enabled]
The following items appear only when you set Network Stack to [Enabled].
IPv4 PXE Support
Allows you to enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE boot
support will be unavailable.
Configuration options: [Disabled] [Enabled]
IPv6 PXE Support
Allows you to enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE boot
support will be unavailable.
Configuration options: [Disabled] [Enabled]
3.3.12 USB Configuration
XHCI Hand-off
This item functions as a workaround for OSes without XHCI hand-off support. The
XHCI ownership change should be claimed by XHCI driver.
Configuration options: [Enabled] [Disabled]
USB Mass Storage Driver Support
Allows you to enable or disable USB Mass Storage Driver Support.
Configuration options: [Disabled] [Enabled]
U32G2_1
Allows you to enable or disable USB port. Once set to
[Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
U32G2_C2
Allows you to enable or disable USB port. Once set to
[Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]