User Manual
Table Of Contents
- Chapter 1 Product Overview
- Chapter 2: Motherboard Information
- Chapter 3: BIOS Setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 Power Management
- 3.3.6 PCI Express Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 VMD setup menu
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 APM Configuration
- 3.3.16 EZ-Flash
- 3.3.17 IO Expander Configuration
- 3.3.18 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
2-17
Chapter 2: Motherboard information
3. USB 3.2 Gen 1 vertical connector (U32G1_8)
Connect a USB 3.2 Gen 1 device to this connector. This connector complies
with USB 3.2 Gen 1 specifications and provide faster data transfer speeds
of up to 5 Gbps, faster charging time for USB-chargeable devices, optimized
power efficiency, and backward compatibility with USB 2.0.
U32G1_8
Never connect a 1394 cable to the USB connector. Doing so will damage the
motherboard.
The USB cable is purchased separately.
4. USB 2.0 connector (10-1 pin USB_1112, USB_713)
This header is for an USB 2.0 port. Connect the USB cable to this header.
This USB header complies with USB 2.0 specification that supports up to 480
Mbps connection speed.
Connector type
Header 2x5p, K9, 2.54mm pitch