User Manual
Table Of Contents
- Chapter 1 Product Overview
- Chapter 2: Motherboard Information
- Chapter 3: BIOS Setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 Power Management
- 3.3.6 PCI Express Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 VMD setup menu
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 APM Configuration
- 3.3.16 EZ-Flash
- 3.3.17 IO Expander Configuration
- 3.3.18 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
3-5
Chapter 3: BIOS setup
Power Limit 2 Override
Allows you to enable or disable Power Limit 2 Override. If this option is set to
[Disabled], BIOS will program the default values for Power Limit 2.
Configuration options: [Enabled] [Disabled]
The following item appears only when you set Power Limit 2 Override to
[Enabled].
Power Limit 2
Allows you to configure Power Limit 2 value in milliwatts.
3.3.4 Graphics Configuration
This item allows you to select a primary display from IGFX and PEG graphical
devices.
Primary Display
Allows you to select which of the IGFX/PEG/PCI Graphics devices should be the
primary display or select HG for Hybrid Gfx.
Configuration options: [Auto] [IGFX] [PEG Slot] [PCH PCI]
Internal Graphics
[Disabled]
Disables internal graphics.
[Enabled] Enables internal graphics.
RC6 (Render Standby)
Allows you to enable or disable render standby support.
Configuration options: [Disabled] [Enabled]
3.3.5 Power Management
This item allows you to configure system ACPI parameters.
Enable ACPI Auto Configuration
Allows you to enable or disable BIOS ACPI Auto Configuation.
Configuration options: [Disabled] [Enabled]
Enable Hibernation
Enables or disables system ability to Hibernate (0S/S4 Sleep State).
Configuration options: [Disabled] [Enabled]
ACPI Sleep State
Allows you to select the highest ACPI sleep state the system will enter when the
SUSPEND button is pressed.
Configuration options: [S3 (Suspend to RAM)] [Suspend Disabled]