User Manual
Table Of Contents
- Chapter 1 Product Overview
- Chapter 2: Motherboard Information
- Chapter 3: BIOS Setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 Power Management
- 3.3.6 PCI Express Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 VMD setup menu
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 APM Configuration
- 3.3.16 EZ-Flash
- 3.3.17 IO Expander Configuration
- 3.3.18 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
3-7
Chapter 3: BIOS setup
Detect Non-Compliance Device
When set to [Enabled], this item allows you to detect the non-compliance
device in PEG.
Configuration options: [Disabled] [Enabled]
PCIEx4(G4)_1 Slot
Allows you to configure the PCI Express Root Port settings.
PCIEx4(G4)_1 Slot
Allows you to enable or disable the PCI Express Root Port.
Configuration options: [Disabled] [Enabled]
The following items appear only when you set PCIEx4(G4)_1 Slot to [Enabled].
PCIe Speed
Allows you to configure the PCIe speed.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3] [Gen4]
Detect Timeout
Allows you to set the time (milliseconds) of waiting for link to exit Detect state
for enabled ports before assuming there is no device and potentially disabling
the port. Use the <+> and <-> keys to adjust the value or input the desired
value.
Detect Non-Compliance Device
When set to [Enabled], this item allows you to detect the non-compliance
device in PEG.
Configuration options: [Disabled] [Enabled]
PCIEx4(G4)_2 Slot
Allows you to configure the PCI Express Root Port settings.
PCIEx4(G4)_2 Slot
Allows you to enable or disable the PCI Express Root Port.
Configuration options: [Disabled] [Enabled]
The following items appear only when you set PCIEx4(G4)_2 Slot to [Enabled].
PCIe Speed
Allows you to configure the PCIe speed.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3] [Gen4]
Detect Timeout
Allows you to set the time (milliseconds) of waiting for link to exit Detect state
for enabled ports before assuming there is no device and potentially disabling
the port. Use the <+> and <-> keys to adjust the value or input the desired
value.