User Manual
Table Of Contents
- Chapter 1 Product Overview
- Chapter 2: Motherboard Information
- Chapter 3: BIOS Setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 Power Management
- 3.3.6 PCI Express Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 VMD setup menu
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 APM Configuration
- 3.3.16 EZ-Flash
- 3.3.17 IO Expander Configuration
- 3.3.18 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
3-8
Q670EM-IM-A
Detect Non-Compliance Device
When set to [Enabled], this item allows you to detect the non-compliance
device in PEG.
Configuration options: [Disabled] [Enabled]
3.3.7 Super IO Configuration
Serial Port 1 Configuration
This item allows you to set parameters of Serial Port 1 (COMA).
Serial Port
Allows you to enable or disable the serial port (COM).
Configuration options: [Disabled] [Enabled]
The following item appears only when you set Serial Port to [Enabled].
COM1 Control
Allows you to select COM1 mode.
Configuration options: [RS232] [RS422] [RS485]
Serial Port 2 Configuration
This item allows you to set parameters of Serial Port 2 (COMB).
Serial Port
Allows you to enable or disable the serial port (COM).
Configuration options: [Disabled] [Enabled]
The following item appears only when you set Serial Port to [Enabled].
Serial Port 7 Configuration
This item allows you to set parameters of Serial Port 7 (COMG).
Serial Port
Allows you to enable or disable the serial port (COM).
Configuration options: [Disabled] [Enabled]
Serial Port 8 Configuration
This item allows you to set parameters of Serial Port 4 (COMH).
Serial Port
Allows you to enable or disable the serial port (COM).
Configuration options: [Disabled] [Enabled]
Serial Port 9 Configuration
This item allows you to set parameters of Serial Port 5 (COMI).