User Manual
Table Of Contents
- Chapter 1 Product Overview
- Chapter 2: Motherboard Information
- Chapter 3: BIOS Setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 Power Management
- 3.3.6 PCI Express Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 VMD setup menu
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 APM Configuration
- 3.3.16 EZ-Flash
- 3.3.17 IO Expander Configuration
- 3.3.18 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
3-17
Chapter 3: BIOS setup
Wake up hour
Allows you to enter a natural number within 0-23 for hour. For example, enter 3 for
3:00 am and 15 for 3:00 pm.
Wake up minute
Allows you to enter a natural number within 0-59 for minute.
Wake up second
Allows you to enter a natural number within 0-59 for second.
The following items appear when you set Power On By RTC to [Monthly
event].
Day of the Month
Allows you to select the day of the month when the system is to wake up.
Wake up hour
Allows you to enter a natural number within 0-23 for hour. For example, enter 3 for
3:00 am and 15 for 3:00 pm.
Wake up minute
Allows you to enter a natural number within 0-59 for minute.
Wake up second
Allows you to enter a natural number within 0-59 for second.
3.3.17 IO Expander Configuration
IO Expander GPIO 0(~7)
Direction
Allows you to select the direction of this GPIO.
Configuration options: [Output] [Input]
The following item appears when you set Direction to [Output].
Output Value
Allows you to set the Output Value of this GPIO.
Configuration options: [Low] [High]
3.3.16 EZ-Flash
This item allows you to enter EZ-Flash mode. After you press <Enter>, a
confirmation message appears. Use the left/right arrow key to select between
[Yes] or [No], then press <Enter> to confirm your choice.