User Manual
Table Of Contents
- Chapter 1 Product Overview
- Chapter 2: Motherboard Information
- Chapter 3: BIOS Setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 Power Management
- 3.3.6 PCI Express Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 VMD setup menu
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 APM Configuration
- 3.3.16 EZ-Flash
- 3.3.17 IO Expander Configuration
- 3.3.18 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
3-19
Chapter 3: BIOS setup
Chassis Fan 3 Setting
Chassis Fan3 Temperature 1(~4)
Allows you to set the value of temperature1(~4).
Chassis Fan3 FD/RPM 1(~4)
Allows you to set the value of Fan Duty/PRM 1(~4) when temperature is
T1(~4).
CPU Fan Setting
CPU Fan Temperature 1(~4)
Allows you to set the value of temperature1(~4).
CPU Fan FD/RPM 1(~4)
Allows you to set the value of Fan Duty/PRM 1(~4) when temperature is
T1(~4).
3.5 Security menu
The Security menu allows a new password to be created or a current password to
be changed. The menu also enables or disables the Secure Boot state and lets the
user configure the System Mode state.
3.5.1 Administrator Password
If you have set an administrator password, we recommend that you enter the
administrator password for accessing the system.
To set an administrator password:
1. Select the Administrator Password item and press <Enter>.
2. From the Create New Password box, key in a password, then press <Enter>.
To change an administrator password:
1. Select the Administrator Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then press <Enter>.
3. From the Create New Password box, key in a new password, then press <Enter>.
4. Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an
administrator password, but press <Enter> when prompted to create/confirm the
password.