User Manual
Table Of Contents
- Chapter 1 Product Overview
- Chapter 2: Motherboard Information
- Chapter 3: BIOS Setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 Power Management
- 3.3.6 PCI Express Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 VMD setup menu
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 APM Configuration
- 3.3.16 EZ-Flash
- 3.3.17 IO Expander Configuration
- 3.3.18 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
3-20
Q670EM-IM-A
3.5.2 User Password
If you have set a user password, you must enter the user password for accessing
the system.
To set a user password:
1. Select the User Password item and press <Enter>.
2. From the Create New Password box, key in a password, then press <Enter>.
3. Confirm the password when prompted.
To change a user password:
1. Select the User Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then press <Enter>.
3. From the Create New Password box, key in a new password, then press <Enter>.
4. Confirm the password when prompted.
To clear a user password:
1. Select the Clear User Password item and press <Enter>.
2. Select Yes from the Warning message window then press <Enter>.
3.5.3 Secure Boot
Secure Boot feature is active when Secure Boot is set to [Enabled], Platform Key
(PK) is enrolled and the system is running in User mode. Changing the mode
requires platform reset.
Configuration options: [Disabled] [Enabled]
Secure Boot Mode
Allows you to select Secure Boot Mode. When set to [Custom], Secure Boot Policy
variables can be configured by a physically present user without full authentication.
Configuration options: [Standard] [Custom]
Key Management
Allows you to modify Secure Boot Policy variables without full authentication.
Platform Key (PK)
Configuration options: [Details] [Export] [Update] [Delete]
Key Exchange Keys (KEK) / Authorized Signatures (db) / Forbidden
Signatures (dbx)
Configuration options: [Details] [Export] [Update] [Append] [Delete]