User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Industrial motherboard
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 Graphic Configuration
- 4.4.2 CPU Configuration
- 4.4.3 Watchdog Timer
- 4.4.4 CSM Configuration
- 4.4.5 Super IO Configuration
- 4.4.6 Serial Console Redirection
- 4.4.7 SATA Configuration
- 4.4.8 USB Configuration
- 4.4.9 Trusted Computing
- 4.4.10 NVMe Configuration
- 4.4.11 Onboard Devices Configuration
- 4.4.12 APM Configuration
- 4.4.13 Network Stack Configuration
- 4.4.14 AMD CBS
- 4.4.15 AMD PBS
- 4.4.16 EZ-Flash
- 4.5 Hardware Monitor menu
- 4.6 Security
- 4.7 Boot menu
- 4.8 Exit menu
- 4.9 Updating your BIOS
- Appendix
34
Industrial motherboard
NOTE: The illustrations in this section are for reference only. The slots may vary depending on model.
IMPORTANT!
• Ensure that your hands are dry before proceeding with the rest of the installation process. Before
installing any of the features in this guide, use a grounded wrist strap or touch a safely grounded object
or metal object to avoid damaging them due to static electricity.
• Turn off the power of your Industrial motherboard, and allow it to cool for at least 10 minutes before
performing any installation/uninstallation process.
3.1 Installing memory modules
Your motherboard comes with a SO-DIMM memory slot that allow you to install a DDR4 SO-DIMM.
1. Press the retaining clips outward to unlock the memory slot.
2. Align a memory module to the slot such that the notch on the memory module matches the memory slot
key on the socket.
NOTE: A memory module is keyed with a notch so that it fits in only one direction. DO NOT force a memory
module into a slot in the wrong direction to avoid damaging the memory module.
3. Push the memory module into the memory slot until both retaining clips snap back into place to ensure the
memory module is securely seated in place.
DIMM slot