User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Industrial motherboard
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 Graphic Configuration
- 4.4.2 CPU Configuration
- 4.4.3 Watchdog Timer
- 4.4.4 CSM Configuration
- 4.4.5 Super IO Configuration
- 4.4.6 Serial Console Redirection
- 4.4.7 SATA Configuration
- 4.4.8 USB Configuration
- 4.4.9 Trusted Computing
- 4.4.10 NVMe Configuration
- 4.4.11 Onboard Devices Configuration
- 4.4.12 APM Configuration
- 4.4.13 Network Stack Configuration
- 4.4.14 AMD CBS
- 4.4.15 AMD PBS
- 4.4.16 EZ-Flash
- 4.5 Hardware Monitor menu
- 4.6 Security
- 4.7 Boot menu
- 4.8 Exit menu
- 4.9 Updating your BIOS
- Appendix
38
Industrial motherboard
1. Prepare the bundled backplane.
2. Peel off the plastic film from the bottom of the backplane.
3. Flip your Industrial motherboard over, then orient and align the backplane so that the backplane is within
the backplane guidelines on the Industrial motherboard.
4. Place the adhesive side of the backplane onto the Industrial motherboard.
3.6 Installing the backplane