User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Industrial motherboard
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 Graphic Configuration
- 4.4.2 CPU Configuration
- 4.4.3 Watchdog Timer
- 4.4.4 CSM Configuration
- 4.4.5 Super IO Configuration
- 4.4.6 Serial Console Redirection
- 4.4.7 SATA Configuration
- 4.4.8 USB Configuration
- 4.4.9 Trusted Computing
- 4.4.10 NVMe Configuration
- 4.4.11 Onboard Devices Configuration
- 4.4.12 APM Configuration
- 4.4.13 Network Stack Configuration
- 4.4.14 AMD CBS
- 4.4.15 AMD PBS
- 4.4.16 EZ-Flash
- 4.5 Hardware Monitor menu
- 4.6 Security
- 4.7 Boot menu
- 4.8 Exit menu
- 4.9 Updating your BIOS
- Appendix
44
Industrial motherboard
4.4.1 Graphic Configuration
CPU Information
Allows you to view memory information related to Node 0.
4.4.2 CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically detects.
NOTE: The following item is only available when a LVDS monitor is connected.
LVDS Active
Configuration options: [Disabled] [Enabled]
Watchdog Support
Allows you to enable or disable Watchdog Support.
Configuration options: [Disabled] [Enabled]
NOTE: The following items appear only when Watchdog Support is set to [Enabled].
Watchdog Count Mode
Allows you to select the Watchdog Timer count mode.
Configuration options: [Second Mode] [Minute Mode]
Watchdog Timer
Allows you to input the Watchdog Timer I Time-out value.
4.4.3 Watchdog Timer