User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Industrial motherboard
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 Graphic Configuration
- 4.4.2 CPU Configuration
- 4.4.3 Watchdog Timer
- 4.4.4 CSM Configuration
- 4.4.5 Super IO Configuration
- 4.4.6 Serial Console Redirection
- 4.4.7 SATA Configuration
- 4.4.8 USB Configuration
- 4.4.9 Trusted Computing
- 4.4.10 NVMe Configuration
- 4.4.11 Onboard Devices Configuration
- 4.4.12 APM Configuration
- 4.4.13 Network Stack Configuration
- 4.4.14 AMD CBS
- 4.4.15 AMD PBS
- 4.4.16 EZ-Flash
- 4.5 Hardware Monitor menu
- 4.6 Security
- 4.7 Boot menu
- 4.8 Exit menu
- 4.9 Updating your BIOS
- Appendix
56
Industrial motherboard
Smart Fan Mode
This item allows you to select the Smart Fan mode.
Configuration options: [Disabled] [Normal] [Manual Mode]
NOTE: The following item appears only when Smart Fan Mode is set to [Manual Mode].
Smart Fan Function
System Fan Setting / CPU Fan Setting
Fan step time
This item allows you to set the amount of time Fan takes to increase/decrease its value by one step. (Units
are in intervals of 0.01 second)
Configuration options: [0] - [255]
Fan step value
This item allows you to set the duty per step.
Configuration options: [0] - [15]
Temperature 1
Configuration options: [0] - [255]
Temperature 2
Configuration options: [0] - [255]
4.5 Hardware Monitor menu
The Hardware Monitor menu displays the system temperature/power status, and allows you to change the fan
settings.