User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Industrial motherboard
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 Graphic Configuration
- 4.4.2 CPU Configuration
- 4.4.3 Watchdog Timer
- 4.4.4 CSM Configuration
- 4.4.5 Super IO Configuration
- 4.4.6 Serial Console Redirection
- 4.4.7 SATA Configuration
- 4.4.8 USB Configuration
- 4.4.9 Trusted Computing
- 4.4.10 NVMe Configuration
- 4.4.11 Onboard Devices Configuration
- 4.4.12 APM Configuration
- 4.4.13 Network Stack Configuration
- 4.4.14 AMD CBS
- 4.4.15 AMD PBS
- 4.4.16 EZ-Flash
- 4.5 Hardware Monitor menu
- 4.6 Security
- 4.7 Boot menu
- 4.8 Exit menu
- 4.9 Updating your BIOS
- Appendix
Industrial motherboard
59
User Password
To set a user password:
1. Select the User Password item and press <Enter>.
2. From the Create New Password box, key in a password, then press <Enter>.
3. Confirm the password when prompted.
To change a user password:
1. Select the User Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then press <Enter>.
3. From the Create New Password box, key in a new password, then press <Enter>.
4. Confirm the password when prompted.
To clear a user password:
1. Select the Clear User Password item and press <Enter>.
2. Select Yes from the Warning message window then press <Enter>.
Secure Boot
Secure Boot
Secure Boot can be enabled if the system is running in User mode with enrolled platform Key (EPK) or if the
CSM function is disabled.
Configuration options: [Disabled] [Enabled]
Secure Boot Mode
This item allows you to select Secure Boot Mode. When [Custom] is selected, Secure Boot Policy variables can
be configured by a physically present user without full authentication.
Configuration options: [Standard] [Custom]
NOTE: The following item appears only when Secure Boot Mode is set to [Custom].
Key Management
The Key Management item allows you to modify Secure Boot variables and set Key Management page.
Platform Key(PK)
Configuration options: [Update]
Key Exchange Keys (KEK) / Authorized Signatures (DB) / Forbidden Signatures (DBX)
Configuration options: [Update] [Append]