Firmware Update

3

Updatingthefirmware
Toupdatethefirmw are:
1. EnsurethatyouhaveinstalledyourRAIDRExpressPCIeSSDcard.
NOTE:Formoredetails,refertoyourRAIDRExpressPCIeSSDcard’susermanual.
2. EnsurethatyouhavesetthebootpriorityonUSBdriveintheBIOS.
NOTE:Formoredetails,referto
yourmotherboard’susermanual.
3. InstallyourUSBdrivetoyourcomputer’sUSBport.
4. Fromthescreen,selectfdos.

5. Keyinthefollowing:
C:\cdfw
C:\fw>dir/w
C:\FW>UEFI
6. Press<Enter>.
7. Press<Y>tostarttheupdateprocess.
NOTE:BeforeyouproceedwiththeUEFIROMUpdate,ensurethatyoumovethe
DuoModeswitchtotherighttoenabletheUEFImode.TheDuoModeLEDturnstosolid
orange
indicatingthattheUEFImodeisenabled.
