Specifications

19
Component size limitations
Fortress Series FT05
(5) Motherboard size limitation
A. Illustration: ASUS Rampage III Extreme for example is wider than standard ATX motherboards
Although FT05 was not designed for reference Extended-ATX motherboard, the internal space can still allow installation for motherboards with width
of up to 11 inches. In addition, the motherboard tray has mounting standoffs for supporting SSI-CEB dual CPU motherboards. Enthusiast motherboards
such as ASUS’s Rampage III Extreme and EVGA’s X58 Classified 4-Way SLI are 10.6 and 10.375 inches wide respectively. These are wider than
standard ATX motherboard specification of 9.6 inches, but will fit inside FT05 without any problems.
B. Illustration: New generation of SSI-CEB server or workstation motherboards no longer require CPU cooler mounting holes on the motherboard tray.
Coolers can now be installed directly on the motherboard. As a result, we eliminated support for SSI-CEB CPU cooler mounting holes and instead increased the
large gap on the motherboard tray to support CPU cooler back plates swapping with modern LGA 1156/1155/1150 motherboards. The FT05 chassis’ support
for new and future SSI-CEB motherboards should be unaffected by this change.
AB
A. Abbildung: Die ASUS Rampage II Extreme beispielsweise ist breiter als ein Standard-ATX-Motherboards.
Obwohl das FT05 keine echten Extended ATX- (SSI-EEB) Motherboards unterstützt, unterstützt es ATX-Modelle mit einer Breite bis 11-Zoll. Löcher
für Motherboard-Abstandhalter sind zur Unterstützung von SSI-CEB verfügbar, sodass High-End-Enthusiasten ATX-Platinen, wie ASUS Rampage III
Extreme oder EVGA X58 SLI Classified, die bis zu 10,6-Zoll breit sind, komfortabel im FT05 unterbringen können.
B. Abbildung: Hochmoderne Motherboards von SSI-CEB-Servern und -Arbeitsrechnern benötigen keine Löcher zur CPU-Kühlermontage am
Motherboard-Einschub mehr.
Die Kühler können nun direkt am Motherboard installiert werden. Dadurch haben wir die Unterstützung der Löcher zur SSI-CEB-CPU-Kühlermontage
aufgegeben und stattdessen den Abstand am Motherboard-Einschub vergrößert; dadurch werden CPU-Kühlerrückplatten unterstützt, die mit einer
größeren Anzahl an LGA 115X-Motherboards kompatibel sind. Die Unterstützung neuer und zukünftiger SSI-CEB-Motherboards durch das FT05-Gehäuse
wird durch diese Änderung nicht beeinflusst.
A. Illustration : ASUS Rampage III Extreme par exemple est plus large que les cartes mères standard ATX
Bien que le FT05 ne supporte pas les cartes mères Extended ATX (SSI-EEB), il supporte les modèles ATX jusqu'à 11 pouces de large. Des trous
pour les espaceurs de carte mère sont inclus pour supporter SSI-CEB pour que les cartes ATX de haut de gamme tels que ASUS Rampage III
Extreme ou EVGA X58 SLI Classified, qui ont une largeur de jusqu'à 10,6", puissent rentrer facilement à l'intérieur du FT05.
B. Illustration : Les portes-carte mère destinés à la nouvelle génération de cartes mères pour station de travail ou serveur SSI-CEB n'ont plus besoin
de trous de montage pour le refroidisseur de l'unité centrale.
Les refroidisseurs peuvent désormais s'installer directement sur la carte mère. Nous avons ainsi éliminé le support destiné aux trous de montage
pour le refroidisseur de l'unité centrale SSI-CEB et l'espace sur le porte-carte mère permettant de permuter les plaques arrière du refroidisseur,
avec plus de cartes mères LGA 115X, est agrandi. Le support du châssis FT05 pour les nouvelles cartes mères SSI-CEB et celles à venir, ne sera
pas affecté par cette modification.