User’s Manual

4-32 Chapitre 4 : Le BIOS
4.6.6 Hardware Monitor
v02.58 (C)Copyright 1985-2006, American Megatrends, Inc.
Select Screen
Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
Hardware Monitor
CPU Temperature [38.5ºC/102ºF]
MB Temperature [36ºC/96.5ºF]
NB Temperature [35ºC/95ºF]
SB Temperature [43ºC/109ºF]
OPT1 Temperature [N/A]
OPT2 Temperature [N/A]
OPT3 Temperature [N/A]
NB TEMP Overheat Protection [90ºC]
SB TEMP Overheat Protection [90ºC]
OPT1 TEMP Overheat Protection [90ºC]
OPT2 TEMP Overheat Protection [90ºC]
OPT3 TEMP Overheat Protection [90ºC]
CPU Fan and Chassis Fan
OPT Fan and Power Fan
CPU Voltage [1.272V]
CPU Temperature
BIOS SETUP UTILITY
Power
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
Délez vers le bas pour afcher plus d’éléments.
v02.58 (C)Copyright 1985-2006, American Megatrends, Inc.
Select Screen
Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
CPU PLL Voltage [ 1.600V]
FSB Termination Voltage [ 1.232V]
DRAM Voltage
[ 1.568V]
North Bridge Voltage [ 1.264V]
South Bridge Voltage [ 1.072V]
SB 1.5V Voltage [ 1.520V]
DRAM Controller Voltage REF [ 0.784V]
3.3V Voltage [ 3.264V]
5V Voltage [ 5.064V]
12V Voltage
[12.208V]
CPU Temperature; MB Temperature; NB Temperature;
SB Temperature; OPT1/2/3 Temperature [xxxºC/xxxºF]
Le monitoring matériel embarqué détecte automatiquement et afche la carte
mère du CPU, le northbridge, le southbridge et les températures des périphériques
assignés. Sélectionez [Ignored] (ignorer) si vous ne voulez pas afcher les
températures détectées.
NB TEMP Overheat Protection; SB TEMP Overheat Protection [90ºC]
Le système s’éteint automatiquement lorsque le chipset du Northbridge ou du
Southbridge dépasse la température sélectionnée an d’éviter d’éventuels dégâts.
Options de conguration : [Disabled] [70ºC] [80ºC] [90ºC]
OPT1/2/3 TEMP Overheat Protection [90ºC]
Vous permet de sélectionner la température à partir de laquelle le système s’éteint
automatiquement lorsqu’un des câbles de détection thermique connecté à la carte
mère détecte une surchauffe d’un des composants.
Options de conguration : [Disabled] [50ºC] [60ºC] [70ºC] [80ºC] [90ºC]