User Manual

ROG Rampage III GENE 3-29
The USB Devices Enabled item shows the auto-detected values. If no USB
device is detected, the item shows None.
USB Functions [Enabled]
[Enabled] Enables the USB Host Controllers.
[Disabled] Disables the controllers.
The following items appear only when you set USB Functions to [Enabled].
USB 2.0 Controller [Enabled]
[Enabled] Enables the USB 2.0 Controllers.
[Disabled] Disables the controllers.
USB 2.0 Controller Mode [HiSpeed]
[FullSpeed] Sets the USB 2.0 Controller in full speed (12Mbps).
[HiSpeed] Sets the USB 2.0 Controller in high speed (480Mbps).
BIOS EHCI Hand-off [Enabled]
[Enabled] Enables the support for operating systems without an EHCI
hand-off feature.
[Disabled] Disables the function.
Legacy USB Support [Auto]
[Auto] Allows the system to detect the presence of USB devices at
startup. If detected, the USB controller legacy mode is enabled. If
no USB device is detected, the legacy USB support is disabled.
[Enabled] Enables the support for USB devices on legacy operating systems
(OS).
[Disabled] Disables the function.
 
The items in this menu allows you to change the USB-related features. Select an
item then press <Enter> to display the configuration options.
Rampage III GENE BIOS SETUP Version 0213
Advanced
USB Conguration
USB Devices Enabled:
2 Hubs
USB Functions [Enabled]
USB 2.0 Controller [Enabled]
USB 2.0 Controller Mode [HiSpeed]
BIOS EHCI Hand-off [Enabled]
Legacy USB Support [Auto]
Options
Disabled
Enabled